MAZDA CX-7 FRONT DOOR PANEL REMOVAL REPLACEMENT CX7

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ก.ย. 2024

ความคิดเห็น • 20

  • @AutoRepairGuys
    @AutoRepairGuys  6 ปีที่แล้ว

    ⛐ Check out our Garage to see what tools we use and recommend:
    www.amazon.com/shop/worldmechanics
    ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
    ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

  • @Wondermel13
    @Wondermel13 6 ปีที่แล้ว +22

    Note to all...the passenger side door has a grab bar that is not on the drivers side, pop off the silver cover and remove the two additional screws. I spent an hour trying to pry the panel off before I realized what was happening!

    • @Cliflyri
      @Cliflyri 4 ปีที่แล้ว

      Thank you ;-)

    • @florintufescu2980
      @florintufescu2980 4 ปีที่แล้ว

      I almost broke the bowden cable support prying on the door until I realized it is also screwed through the passenger handle. I wish they add a note about this on their clip to warn users who try to blindly follow the video, assuming the passenger door works the same. Other than that, thanks for the good instruction clips!

    • @joshp1708
      @joshp1708 3 ปีที่แล้ว +1

      Fucking thank you. Jesus Christ

  • @captaincrunch1707
    @captaincrunch1707 2 ปีที่แล้ว +1

    If anybody has an intermittent automatic window. Pull the door as shown here and just pop out the window motor and then try running the window switch. Our motor had busted plastic gears inside so we replaced motor and works again. Many thanks for posting this video!!

  • @JerMannski
    @JerMannski ปีที่แล้ว

    Thanks again! It helped me two years ago and again today!

  • @charlescross3215
    @charlescross3215 5 ปีที่แล้ว

    Thanks, gents. That made life a bit less stressful. Removed the panel within ten minutes, with some stop and starting of your video.

  • @richieparrish7101
    @richieparrish7101 6 ปีที่แล้ว +1

    Thanks it would be good to add on how to remove the regulator cover as well it's about 8 bolts, 2 nuts, and 1 plastic panel clip. It's common on these for the glass to kick forward on roll up, there's two screws that hold the glass straight it's common for one to come loose or fall out. Keep in mind the 2 nuts on the panel hold the glass rail up so once you pull it off the glass will drop a few inches so it's best to have a second person there to hold the glass up for reinstallation. Good luck. I own a cx7 myself and post a few videos but you guys provide quite a few good ones thanks again

  • @jacobpendleton5063
    @jacobpendleton5063 ปีที่แล้ว

    Thx dude

  • @danthemanoftheland
    @danthemanoftheland 3 ปีที่แล้ว

    Thanks!! Very good video!

  • @anitagiasson9212
    @anitagiasson9212 2 ปีที่แล้ว

    Awesome help thanks

  • @jaymesmarius621
    @jaymesmarius621 7 ปีที่แล้ว +2

    Do you have a video on how to replace a exterior passenger door handle? Thank you.

  • @Calvintherock
    @Calvintherock 7 หลายเดือนก่อน

    Heavychevyguy mad, there’s an extra grab handle on the passenger side you gotta pop out that cover like the driver handle to remove 2 extra screws

  • @Cliflyri
    @Cliflyri 4 ปีที่แล้ว

    Thank you!

  • @romanasterix
    @romanasterix 6 ปีที่แล้ว

    Thank you:-)

  • @johnxscar
    @johnxscar ปีที่แล้ว

    how do u take off the entire door?

  • @stevenmoo1957
    @stevenmoo1957 6 ปีที่แล้ว +1

    How to remove passenger front door?

    • @ourmark100
      @ourmark100 4 ปีที่แล้ว

      Passenger grab handle has a plastic cover you remove by putting a flat screwdriver in the notch at the bottom. Then loosen the two screws which secure it to the door.

  • @HeavyChevyGuy
    @HeavyChevyGuy 7 หลายเดือนก่อน

    Very misleading video. The passenger side is different