I hate how the q50 needs a whole headlight replacement if or when your lowbeams fail. Can't just change a bulb on these vehicles.. But I love how mechanics knows their stuff down to a science! Good job man!
Mechanic just tried the hack on my 2017 q50 and it worked! Hope this is a long term fix. My headlight was also replaced, and it works 100%. The error message is gone. Big thanks to the creator of this video!
Thank you thank you thank you Dealer wanted $160 to look at light for system error and $$$$ to replace 1 headlight Your $1.00 wire hack worked!!! Thank you so very much Alan from CT
Mr George thank you so so much for the great info and guidance you give in this video I was having that problem on my q50 2014 did they same thing and the warning light it’s gone couldn’t afford a 2000$ repair at the dealership . Thank you very much .
Hi Same, where did you order your bulb. Dealer is telling me that I need to replace the whole headlight not just the headlight. Seems like a lot of extra work for a light that blew out.
Excellent right up! Have this exact issue on a 15 Murano platinum and plan to fix this stupid message like you've show here. My question is, where can you find the wiring diagram for a murano to tell which color wire it is? Thanks so much! Enjoyed the video!
Thank you for the video. The only thing I worry about is 10 volts potential between pins 2 and 3. Isn't it too much just for signal cable? I want to get rid of this warning message on my q60 2017, but I really don't want to burn some microscheme in same time. Shouldn't there be at least some resistor between pins 2 and 3 just for safety?
Hello, I need one replace one of my headlights on the driver side , I have seen some options from eBay , if I swap will I get this message? What creates this , I’m afraid to swap the headlight and getting that warning.
Hi George I saw the other video that you did on the Nissan rogue. I have a Murano 2015 having the same problem. I tried and blow out the fuse. please if you can help with the diagram so I can fix the problem. just want to jump it. please please. Thank you.
THANKS GEORGE , HAVEN'T SEEN MENY NISSAN PCM PROGRAMMING ON YOUR CHANNEL THAT WOULD BE GREAT IF YOU COULD HOPEFULLY WITH THE LAUNCH SCANTOOL AND PLEASE KEEP UP THE GREAT WORK THANKS SO MUCH .
I have a 16 Maxima SR with the factory HID head lights unfortunately I got in a slight thunder bunder and I really wanted do some blacked out housings and put red headlights and I know it’s illegal but I don’t give a shit. I really don’t feel like paying $1000 for a new headlight when I can get a whole set for 400 bucks that are blacked out. I cannot find a single wire diagram to break down like it did with yours. What do I do?
Wiw your the best. Now i understand how you finding those out! Good job but I'm not very familiar with all those all data things. Is that how you getting the diagrams all data please?
Hi George...I have same issue with my Nissan Maxima platinum 2017...I dont have wiring diagram, kindly advise which to wires to be jumpered?? thanks in advance ...
please the same problem but is toyota prado vx 2014 before change headlamps apear sistem headlamps malfuntion you have the solution whit the diagram for prado vx
Ahmer Ali hey brother hmu on instagram @MasterShefu instagram.com/mastershefu so i can send u photos of the part to order from ebay, i believe if we just replace the ABS wheel sensor, that error will go away. One of the sensors is probably damaged, signaling that error to the computer
Hi George. I have a Q50 headlight purchased on ebay. But the hi beam light is not working. Do you know if it needs to be reprogrammed or it is just the defective headlight?
Can anyone confirm the Pin#'s and wire colors on each light for a 2020 Q60S? Would like to know and not 'fry' something in case this changed from 2015.
George Melnik can you please see the schematics of 2016 maxima and tell me which 2 wires i have to join? i have tried alot searching for schematics but could not find it anywhere. or is there any way i can check ir find the canbus cable using a electric meter ? from your videos i can understand that the canbus wire will connect to negative but the problem is there are many wires how can i know which one is it if i dont have a schematic ? please help bro this is really annoying
I hate how the q50 needs a whole headlight replacement if or when your lowbeams fail. Can't just change a bulb on these vehicles.. But I love how mechanics knows their stuff down to a science! Good job man!
2016 nissan altima same
Mechanic just tried the hack on my 2017 q50 and it worked! Hope this is a long term fix. My headlight was also replaced, and it works 100%. The error message is gone. Big thanks to the creator of this video!
It will work no problems
@@melniksmotors Hello. I have two problems with my Q50 2018, the first is a fault in the key system and the second is the front radar
Best hack ever you saved me hours of trouble shooting thanks alot
Thank you thank you thank you
Dealer wanted $160 to look at light for system error and $$$$
to replace 1 headlight
Your $1.00 wire hack worked!!!
Thank you so very much
Alan from CT
Mr George thank you so so much for the great info and guidance you give in this video I was having that problem on my q50 2014 did they same thing and the warning light it’s gone couldn’t afford a 2000$ repair at the dealership . Thank you very much .
Hi Same, where did you order your bulb. Dealer is telling me that I need to replace the whole headlight not just the headlight. Seems like a lot of extra work for a light that blew out.
Thank you soo much, this trick worked on the 2018 q50 too!
Thank you so much for sharing this video just fixed my light using this technique you the man THANKS AGAIN
Man thanks that was awesome!
I love you! You save me a bunch of headache! 👍🏼
It works like a charm!
Excellent right up! Have this exact issue on a 15 Murano platinum and plan to fix this stupid message like you've show here. My question is, where can you find the wiring diagram for a murano to tell which color wire it is? Thanks so much! Enjoyed the video!
Jumper clips did not remove headlamp system error…..
What should I try next?
Would passenger be the same ? Copper wire goes into 2&3?
hey bro! will this same configuration work for a 2019 q50 silversport???
Thank you for the video. The only thing I worry about is 10 volts potential between pins 2 and 3. Isn't it too much just for signal cable? I want to get rid of this warning message on my q60 2017, but I really don't want to burn some microscheme in same time. Shouldn't there be at least some resistor between pins 2 and 3 just for safety?
I've made it today. All fine. No more annoying message!
It worked,you are the man.
Hello, I need one replace one of my headlights on the driver side , I have seen some options from eBay , if I swap will I get this message? What creates this , I’m afraid to swap the headlight and getting that warning.
Thanks this worked, but is this now masking any problems that may occur later if we leave it like this?
Hi George I saw the other video that you did on the Nissan rogue. I have a Murano 2015 having the same problem. I tried and blow out the fuse. please if you can help with the diagram so I can fix the problem. just want to jump it. please please. Thank you.
Hi George. How can i find the connector diagram for nissan murano 2018 so i can know which terminals do i put the jumper wire. Thank you
THANKS GEORGE , HAVEN'T SEEN MENY NISSAN PCM PROGRAMMING ON YOUR CHANNEL THAT WOULD BE GREAT IF YOU COULD HOPEFULLY WITH THE LAUNCH SCANTOOL AND PLEASE KEEP UP THE GREAT WORK THANKS SO MUCH .
Not many come in for pcm. But I have seen few with transmission problems.
@@melniksmotors THANKS SO MUCH FOR THE REPLY GEORGE , IS IT POSSIBLE TO SEE A VIDEO WITH THE PROCEDURE AND THANKS AGAIN .
Good afternoon, could you help me by telling me how I did that to a 2017 Nissan Maxima Platinum?
Will this exact same process also work on a 2014 Q50??
I have a 16 Maxima SR with the factory HID head lights unfortunately I got in a slight thunder bunder and I really wanted do some blacked out housings and put red headlights and I know it’s illegal but I don’t give a shit. I really don’t feel like paying $1000 for a new headlight when I can get a whole set for 400 bucks that are blacked out. I cannot find a single wire diagram to break down like it did with yours. What do I do?
Thank you for info. Do you know which pins are on Sentra
Does this happen to adaptive or regular headlights?
Hello friend, Which are the colors to jump in a 18 titan xd headlamps, I got the same issue with headlamps system error
Does this trick work on the 2021 Nissan Rogue, please?
Wiw your the best.
Now i understand how you finding those out!
Good job but I'm not very familiar with all those all data things.
Is that how you getting the diagrams all data please?
At 3:21 what's the yellow wire for in the harness? I tried to tap the marker lights as dlr and it broke in half but all the lights are working.
Where could I get the schematic for Nissan sentra 2022 I have same problem?
Wish you were a bit clearer on what neefs to be removed to gain access to the plug, where one gets the schematic, are the pin numbers labeled?
Boa tarde! vc sabe quais são os pinos do sentra sl 2018?
Hi George...I have same issue with my Nissan Maxima platinum 2017...I dont have wiring diagram, kindly advise which to wires to be jumpered?? thanks in advance ...
Ahmed Saleh I didn’t know if you fix this issue but this how you get the diagram carmanuals2.com
please the same problem but is toyota prado vx 2014 before change headlamps apear sistem headlamps malfuntion you have the solution whit the diagram for prado vx
How can i do an ECU reset on this car? I have these AWD and chassis control error warnings that i cant get rid of
Ahmer Ali hey brother hmu on instagram
@MasterShefu
instagram.com/mastershefu
so i can send u photos of the part to order from ebay, i believe if we just replace the ABS wheel sensor, that error will go away.
One of the sensors is probably damaged, signaling that error to the computer
Hi George.
I have a Q50 headlight purchased on ebay. But the hi beam light is not working. Do you know if it needs to be reprogrammed or it is just the defective headlight?
Hello you resolve the problem...I have the same problem
Did you get the high beams to work ? If so how ? Thanks
no. changed the headlight
Was it an aftermarket headlight or oem that came with the car? I just bought new headlights off eBay and the low Beam works high beam doesn’t.
Sorry I just reread your comment you bought them off eBay too
Hi my headlight bulb out can I get a new one or do I have to buy a whole new headlight
Did you ever get an answer to your question
Will bar coding resolve the issue? Would you know if the dealer would perform this type of service ?
No. Dealer will never perform this service. He will make you buy new headlight, plus make you pay labor to install it
George Melnik
Got it. How reliable is this FIX. Will I still have communication working using scan tool to all the modules ?
Hey what type of bulb is used in the q70s
Hi sir u know about camry 2018 how fix headlight error
Would you know what connector numbers would it be for a 2017 Altima
Hello Hernandes, were you able to fix the error problem of the nissan altima 2017
It worked. Thanks
How you made it work ?
Can anyone confirm the Pin#'s and wire colors on each light for a 2020 Q60S? Would like to know and not 'fry' something in case this changed from 2015.
Do you know how to fix the chassis control error?
How to get the diagram, or do anybody has it for A Q50 the base. Model
Good afternoon, someone had the same problem nissan altima 2017 SR headlight system error, can you please tell me,
I need help my q50 doesn't have a black and yellow
hi bro, i have nissan maxima 2016 and my driver side is showing error. can you please make a video and show us how to by pass it
Sure if I had Nissan Maxima here but I don't have one
George Melnik can you please see the schematics of 2016 maxima and tell me which 2 wires i have to join? i have tried alot searching for schematics but could not find it anywhere. or is there any way i can check ir find the canbus cable using a electric meter ? from your videos i can understand that the canbus wire will connect to negative but the problem is there are many wires how can i know which one is it if i dont have a schematic ? please help bro this is really annoying
@@sambulucci hello bro did you managed to find the schematic?
Muy útil
What the fuse for the fog light?
I tried this on my 2014 q50 sport 3.7L for some reason it didn’t work :/
Very good.
Thanks man.
Does anyone know if it works on a 2017 q60? Or any q60?
I had this issue on my q60 2017. Fixed with this hack. All identical- 2nd and 3rd pins
@@zuzlanzuz3592 how did u get to the headlight harness? did u remove the bumper?
@@Kyle-rk6ry no need to remove bumper. After removing intake filter with part of it's casing you can get to the headlight connector
@@zuzlanzuz3592I have a 2017 q60 as well low beam doesn’t turn on all other lights work could this fix the problem?
Having this problem but only one of my headlights is working 🥺🥺
Thanks mr
I have the same problem with my car, Rogue Platinum 2021. I hope someone can help me
مرحبا
Why does this guy doesn't replay? We need help
Huh?????🤦🏿♂️lol