Tiger Tool 10102 Heavy Duty Universal Joint Puller - Best Way To Disassemble Drivelines!
ฝัง
- เผยแพร่เมื่อ 9 เม.ย. 2013
- tigertool.com/products/commer...
The World's greatest and "original" U-Joint Puller! Engineered for use with up to a one-inch impact wrench, this tool provides the ultimate "brute strength" for disassembling drivelines.
Fits Spicer drivelines 1610, 1710, 1760, 1810, 1880, Meritor (Rockwell) 16N, 17N, 18N, 1710, Spicer SPL 140, 170, 250 "Life Series", and Meritor RPL 20, 25 "Permalube" Series. (Designed to work with U-Joint bearing cups from 1.5" to 2.2" and will fit virtually all Class 7 and 8 Trucks and Machinery)
• Eliminates dangerous jacking, hammering, and torching.
• Removes sealed u-joint cups in minutes.
• Does not damage the driveshaft, yokes, joints, or bearing cups.
• Tested and recommended by Dana Spicer Corp.
• One piece unit! No bolts, no cables, and no adapters.
Made in Canada - Tested and recommended by the Driveshaft Division of Dana Corp
#tigertool #Trucktools #truckmechanic #Trucktechnician #heavyequipment #heavydutymechanic #dieselmechanic #cooltools #handtools #Dana #Spicer - ยานยนต์และพาหนะ
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
Visit our website for more information: tigertool.com/products/commercial-u-joint-puller
This could be the greatest TH-cam video ever made
ive only had to use this tool once but when you need it,its worth every penny
I love this tool.
Thank you so much, this is video really helped me
good tool
Отличная приспособа!
I dont know about the tool itself but your video is sure better than "OEM's" poor attempt.
I love this tool , how much it cost
On full mechanical u-joints it's a must! In Canada the salt in the winter will seize it solid. He keeps the impact going like a moron, I run it up tight and smack the ear. That way you don't wreck the yoke or ear on the drive shaft. I have to say though, the tiger tool kingpin press tool is a bag of shit. I paid $1600 for mine at Gregg Distributors. Works fine if the kingpin is sicky but if it's seized into the axle it doesn't work at all which makes it absolutely useless. For $1600, it should work on everything!
Geoff Clark nobody else that I know has such problems with their u joint and kingpin removal. In the United States we own grease guns
Hey cockwad we have grease guns up here too. We also have licensed mechanics. something you guys should look into
💕
Until the threads strip out on the tool.
is there a smaller version for the auto industry
yes but does not look the same look up ball joint/ujoint press www.amazon.com/OTC-7249-U-Joint-Anchor-Service/dp/B0002SRGXY
Wddddddfdd
Is it actually designed to be used with an impact gun?
Yes
I drive a wrecker. We have to pull and hang the driveshafts, and we dont actually pull the u joint. We just seperate it from the yoke. Do do i just need to pull the two? Or do i still need to pull all four caps?
You can just remove the 2 caps on the one side.
Thanks so much
No grease points on that UJ?
Andrew Wilson I seen one, not two. It's got some caked grease on the bearings too.
I have to take this how much is it
tigertool.com/products/ujoint-puller?variant=33571416965258
Where can i get that tool to buy
amazon
Tiger Tool part # 10105 or 10104
You shouldn't be using an impact on a puller, it's very dangerous. If the joint is stuck, you accumulate energy in it qnd when it unstucks, the puller or joint could break and cause serious injury
+Gabriel Thériault as long as you are not a dumbass and use the correct lube on the screw its not an issue
When it unstucks....when it breaks free. Real fine work ya pus
Pretty sure the maker of the tool knows how best to use it... But hey if you want to use a ratchet by all means go ahead Popeye.
@@familytraditiontransportat7951 damn i was dumb 7 years ago
@@TheTERIO14 I respect people that learn and admit to things.