How to Counterbalance and Adjust the Tension on your Gas Spring Monitor Arm Mount (MI-1771)
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Get it on:
Amazon: amzn.to/2DmpK4b
Our website: bit.ly/2FihumK
----------------------------------------------------------------------------------------------------------------------------------------------------------
Mount-It! Monitor Desk Mount, Computer Monitor Stand, Height Adjustable Arm Fits Up to 32 Inch Screens, VESA 75x75 and 100x100, 20 Lb Capacity, Black | Single Monitor, Silver (MI-1771)
Aluminum desktop PC monitor desk riser that mounts Samsung, Acer, Viewsonic, LG, Dell, HP, Asus, AOC, eMachines flat panel LCD and LED displays from 13" to 27" (13, 15, 17, 19, 20, 22, 23, 24 and 27 inch monitors). Compatible with VESA 75 (75 x75 mm) and VESA 100 (100 x 100mm). VESA pattern is the square bolt hole pattern behind the monitor
Spring arm is height adjustable to 13". Gas spring offers adjustable counterbalance to the weight of the monitor, making it incredibly easy to change monitor height. PLEASE NOTE, THE TENSION OF THE SPRING ARM NEEDS TO BE ADJUSTED TO SUIT THE WEIGHT OF YOUR MONITOR. PLEASE REVIEW PRODUCT IMAGES AND USER MANUAL FOR GUIDANCE ON THIS ADJUSTMENT.
Improve the ergonomics of your office workstation and reduce neck, shoulder and back pain! 360 degree articulating arm is fully adjustable
Heavy-duty design supports up to 20 lbs. The modular base design comes with a C-clamp that can also be used as a grommet. This monitor stand can be mounted on tables up to 3.3" thick.
Made from polished aluminum die-cast and solid steel for durability, heavy-duty function and sleek look.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Follow us on:
Facebook: / shopmountit
Instagram: / mount_it_
Visit our Website at: www.mount-it.com for more ergonomic solutions.
----------------------------------------------------------------------------------------------------------------------------------------------------------
I was about to return my Mount-It because it could not hold the weight of my monitor when I happened upon this video. Who knew that the solution to my problems was a few turns of the allen wrench!
Fairly easy to adjust the up and down tension, however it took a little bit of elbow grease to get the adjustment screw turning. At first I thought maybe the adjustment hex screw was fully tightened. It did move, but no where near as easily as the video here shows. I was concerned I was stripping the screw at first. It did work out, however someone at the plant had torqued this way to much. The same goes for the tilt screw adjuster for the pitch on the monitor. Unfortunately, the arm mounting plastic slide, mounted on the Vesa plate mount, which your screw into the back of the monitor, is not snug. There doesn't seem to be any way to secure the monitor from drifting right and left from the horizontal plane, thereby rendering the monitor a little cockyed with the slightest of touch. I didn't mount a massive monitor, a DELL 25" 9.5 lbs, perhaps that would of changed the movements. I get an uneasy feeling that the monitor play from side to side will eventually drive me nuts. Ironically, all the movements are very stiff, to stiff IMO, apart from this.
easy to understand. great video.
Turning Tension screw in either direction until full stop, arm does not budge. I am stuck