2015 fusion 2.0 doing the exact same thing but intermittently. When it mirrors your symptoms perfectly I can unhook the battery for 5 minutes and it will regain communication. I'm assuming it is a heat related connection issue that temporarily corrects itself after a cool down. Bad solder joint on board is my assumption. Point being its not a one off issue and thank-you for the video to confirm my suspicions about the pcm
Did you changed the pcm and did a parameter reset? Just got a ford fusion 2013 and I'm able to start and drive but after some time the car just goes to limp, brakes gets stiff as fuck, steering wheel and shuts down. I almost shat my pants on first time that happened in the middle of the day in an avenue. I believe the car overheats and I'm able to make it run after cool down.
i’m having a similar issue with an 07 ford fusion. dead battery and no start every so often. Replaced my starter and battery, worked fine for a week or two. not the battery has been dying every couple of nights. The battery light came in while sitting in park or if i idle too long, Alternator is good, our next step was going to be looking at the pcm or bcm? What do you think?
Where did you get the pcm from? And how much did it cost you? I am having the same problem 😔😔 I replaced all the relays and fuses but it’s giving me the same errors.
www.fs1inc.com I am not affiliated with this company at all. They just had what I needed for a good price. Worked out good. Customer service pretty good too.
2015 SE and it’s not ( sometimes doesn’t) cranking got give it many tries to start. Auto Zone can scan it but not ORellys and sometimes dies when I do start it
I have a similar problem mines do start but codes coming up change parts n nothing besides keyfob is not opening the car. I have to do it manually. I think I'm going 2 buy the pcm and take it to ford so they install it and avoid the extra problem. Also it saying mine park assistant needs checked ✔️. I changed the sensors and no change
Bro this video was amazing this is literally the issues and what I was thinking of doing
I am having the same problems with a 2013 ford escape. Thanks for the video!
2015 fusion 2.0 doing the exact same thing but intermittently. When it mirrors your symptoms perfectly I can unhook the battery for 5 minutes and it will regain communication. I'm assuming it is a heat related connection issue that temporarily corrects itself after a cool down. Bad solder joint on board is my assumption. Point being its not a one off issue and thank-you for the video to confirm my suspicions about the pcm
Good luck, hope it fixes your issue
Did you changed the pcm and did a parameter reset? Just got a ford fusion 2013 and I'm able to start and drive but after some time the car just goes to limp, brakes gets stiff as fuck, steering wheel and shuts down. I almost shat my pants on first time that happened in the middle of the day in an avenue. I believe the car overheats and I'm able to make it run after cool down.
@filipemendon you need to scan the car for check engine light codes. My car wouldn’t scan to tell me the codes, further telling me the pcm was bad.
That's the thing. My car starts but all those symptoms appears after sometime, looks like something is overheating and throwing a limp mode
And you don’t have a check engine light? Even if you don’t though, you’ll have stored CEL codes you should scan to get an idea what’s going wrong.
Great video I’m glad you was able to inform us I’m having the same problem.
Did it work?
Did you also have a battery light on including the other lights as well im having the same problem.
With the ecu being from flagship 1 did you have any problems so far?
Nope no problems. Drive the car all the time just like I was before this issue.
thank you man ive been trying to find this for a while now
Thank you so much for this video ❤❤🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
i’m having a similar issue with an 07 ford fusion. dead battery and no start every so often. Replaced my starter and battery, worked fine for a week or two. not the battery has been dying every couple of nights. The battery light came in while sitting in park or if i idle too long, Alternator is good, our next step was going to be looking at the pcm or bcm? What do you think?
Still having the same problem?
Where did you get the pcm from? And how much did it cost you? I am having the same problem 😔😔 I replaced all the relays and fuses but it’s giving me the same errors.
www.fs1inc.com
I am not affiliated with this company at all. They just had what I needed for a good price. Worked out good. Customer service pretty good too.
Tried to flash back to stock tune and now my 2017 Fusion is acting like this… after the reset from ford were you able to flash tune it again?????
I have never tuned the car
Had the same happened on a lady's car I know. Wouldn't start at all. Disconnected the battery for 5 minutes then it works for now.
2015 SE and it’s not ( sometimes doesn’t) cranking got give it many tries to start. Auto Zone can scan it but not ORellys and sometimes dies when I do start it
I have a similar problem mines do start but codes coming up change parts n nothing besides keyfob is not opening the car. I have to do it manually. I think I'm going 2 buy the pcm and take it to ford so they install it and avoid the extra problem. Also it saying mine park assistant needs checked ✔️. I changed the sensors and no change
Did you have any issues with your cold air intake ? And if not did you have to tune it
No issues and no I didn’t tune it. It’s been on there for over 4 years now. Just clean it every once in a while
@@StewartMotoring thanks alot cuz
How do check for spark on a 2014 ford fusion ecobost
Thank you
Have 2014 doing the same bad throttle body bad everything poping up turn the key on and off couple time its goes off its getting wroser tho
Are we sure its not the 12v battery?
Obviously it wasn’t the battery if replacing and programming a new pcm fixed the issue….
how much did you pay for the PCM?
$220
My 2015 does the same
Parameter reset
you have a ground issue notice how it doesnt notice what gear you are in
I fixed the issue in the video with a new pcm. Did you even watch?