Sleeved को 2 घंटे तक पाणी मे उबाले जबतक पाणी भाप बनके पुरा खतम नाही हो जाता तब तक उबाले.. sleeved कंपनी जितना स्ट्राँग बनेगा... किसी भी लोहे की चीज को कठोर बनने के लिये हिट करके उसे पाणी मे दुबनेसे ओ चीज कठोर बन जाति हे.... ये तरिका sleeved ओर नये piston के साथ करे... 100% कोई दिक्कत नाही आएगी....🙏
even the stock barrel also a sleeved one, the important thing is how precious we install the sleeve and port way setup like stock one. In Chennai ppl successfully sleeve the cylinder in 135 and get the performance close to stock
Dada, Rajdoot 350, aur Yamaha RX ki Piston me Porting kiyun Kiya jata he? Jab ki Rajdoot 175 yaa Others 2 Stroke Motorcycles ki Piston me Porting nahi Rehta he.
Mere Dost ne khud ke hato se port karaya ,pahla success nhi huwa aur gajan pin bearing me play agaya, fir dusra try me mission complete huwa hai kya bhagti hai....ab 135 bhi fiki padti hai Rx100 ke samne
Meri rx 100 easily 120 jati h sayad usse v thoda bht 125 -130 ja skti h.. Kyuki aaj tk maine full throttle use nahi kiya h bt 120 easily jati h... Maine v porting karaya h Mumbai dharmesh bhai se... Unhone suprb kaam kiya h. Meri bike pehle maximum 100-110 jati thi bt jb se porting hua h ye 120 aram se jati h.
Usa me 1 banda hai jo indian ke parts banata hai usne apne suzuki ks 450 me titnium alloy ki slive aur rings dali the apne yaha koi naji krta aisa kaam
Sir my bike before 10 years ago slveed 1 number finish 2 nd .50number ported ,pickup is low ,but running top end smoothly. 80 to 90 top long 10 km nun stop. Sir u r theory it's unbelievable, ,,understanding we. Thank you sirrrr. Sir if u have original sleeve!???
ਬਹੁਤ ਵਧੀਆ ਜਾਣਕਾਰੀ ਮਿਲੀ ਹੈ।
ਧੰਨਵਾਦ ਜੀ।
Great Rajesh Bhai , bahut hi practically explain Kiya hai, everything with reason like maths and science
Itne Din kahan gaye the Dada
Sleeved block drives well in plain areas but bad for hilly areas. Sleeved block lacks instant pick up. Thats the difference
Bad sleeve. You need properly made sleeve that matches your ports
Sleeved को 2 घंटे तक पाणी मे उबाले जबतक पाणी भाप बनके पुरा खतम नाही हो जाता तब तक उबाले.. sleeved कंपनी जितना स्ट्राँग बनेगा...
किसी भी लोहे की चीज को कठोर बनने के लिये हिट करके उसे पाणी मे दुबनेसे ओ चीज कठोर बन जाति हे....
ये तरिका sleeved ओर नये piston के साथ करे...
100% कोई दिक्कत नाही आएगी....🙏
Bahi aap ka no de sakte ho
Thanks alot...sir can I know sir if I want to know you are from where...and where should I go to sleeved my cylinder of rx100
even the stock barrel also a sleeved one, the important thing is how precious we install the sleeve and port way setup like stock one.
In Chennai ppl successfully sleeve the cylinder in 135 and get the performance close to stock
I totally agree i always get my bore work done in Chennai . Mr murthi is one of the best in Chennai
@@wantedwarlord2486could you please share the phone number and address of Mr.Maruthi?
Thank you
@@wantedwarlord2486sir could you please provide any information about mr.murthi
Send a number who can do best port I have 2 Y1 block
Kya Badiya example Rajesh Vai
Sir, agar water jacket bana liya block ke liye toh?
बहुत बढ़िया sir जी 👌👌👌
Hi Sir ,Yamaha Rx 100 bike mai GOETZE cylinder kit YAMAHA cylinder kit jaisa pickup and performance deta hai ??
Bhai Goetze kaha pr mil rahi hai? Apki City Mai hai available?
Bhai sleeve k topic pe thodi aur clarity do jese ki aap sleeve kis material ki lete ho original se kitni alag hoti h material ki quality etc.
2 Stroke me
New Piston me
Minimum 500km tak 40kmph par Chalana Chahiye
Nice information sir 👍 💯
trasfer port ko ketana badaa karna chaiyaa ?
Good morning sir I have a rx 100 86 model I want to restore please guide me where I go
Bahat din bad video aaya .
rajesh ji selived kaha acchi hoti hai address de ples
Great hoo sir ji🎉❤
Make a video on oversize bores 200 size and all information and necessary things on it !
Good sir ❤ nice information
Location
Rajesh bhai, I want to sleeve my rx100 g-1 block. Love from Bandra, Mumbai
Sir uske bad 80 number dalega
Very nice
Bhai meri rx135 me 1mm (58.99) size ka piston laga hai ab iske baad kaun sa size ka piston lagega
1.25 sam ka ata hai dal do
Bhai ji mujhe sam ka 1.25 ka piston chahiye
Si I want to buy japani block with complete
For Rx 100
Dada, Rajdoot 350, aur Yamaha RX ki Piston me Porting kiyun Kiya jata he? Jab ki Rajdoot 175 yaa Others 2 Stroke Motorcycles ki Piston me Porting nahi Rehta he.
Is baat ka jawab dena iski capacity he bahar he aap ne chiti ke uppar hathi bitha diya
Goetz cylinder kit kaisa hai for rx 135
Piston ko port karna padega. nhi toh pickup nhi aayega uske saath
Sir Price of new Rx 100 cylinder
not in the market, may be you can get RXking's from Indonesia
Goetz ka block kit sahi karab is pe videos banaoo
porting Humesha baad me karna chahiye. Pehle carburettor, reed valve aur CDI upgrade karna chahiye
We have Rx 100 head can you Sleeve it
Mere Dost ne khud ke hato se port karaya ,pahla success nhi huwa aur gajan pin bearing me play agaya, fir dusra try me mission complete huwa hai kya bhagti hai....ab 135 bhi fiki padti hai Rx100 ke samne
Jara humko bhi milao sir ji hum bhi trial lenge
Thank you sir for the information
Great sir ❤
Bhai sleve kaha Karee
Aur kitna cost lagega
Koi address ya mobile no hai kya?
Mene rx100 me 1.75 tak to chalaya he
Sleeve se speed nahi bnti na hi sound original aata ha...
Araldite wali sleeve nhi dalwani chahiye kyunki phir heat transfer kam ho jata
Sir 1.5 mm chal gya hai
MAINE BHI PORT KI HAI BADIYA POWER DETI HAI
Bhai plz make a video on chamber exhaust plz
Phor kuch ulta seedha video bana dega you tube berojgaro ka ghar hogaya he
Stock engine is the best & the beast
Bhai Mera 1.0 ayaa piston useme
Good bro ❤️
good job
Fatne ka dar bhi rahte hai kiya
Kaha se krate hai aap
Kahan se karvate Hain
Hamare Rajesh Vai💞💞🔥💕💕💕💥💥💥
Meri rx 100 easily 120 jati h sayad usse v thoda bht 125 -130 ja skti h.. Kyuki aaj tk maine full throttle use nahi kiya h bt 120 easily jati h... Maine v porting karaya h Mumbai dharmesh bhai se... Unhone suprb kaam kiya h. Meri bike pehle maximum 100-110 jati thi bt jb se porting hua h ye 120 aram se jati h.
Usa me 1 banda hai jo indian ke parts banata hai usne apne suzuki ks 450 me titnium alloy ki slive aur rings dali the apne yaha koi naji krta aisa kaam
Nice
Sir my bike before 10 years ago slveed 1 number finish 2 nd .50number ported ,pickup is low ,but running top end smoothly. 80 to 90 top long 10 km nun stop.
Sir u r theory it's unbelievable,
,,understanding we. Thank you sirrrr.
Sir if u have original sleeve!???
Bhai aapka phone no.milega yanaha rxg ke bare ne discuss karna hai pls contact no.
finnaly🙏
Sar aap ka no mil sakta ha
Urjinal urjinal hi hota hai kuch bhi karlo selve ka bekar maza hota hai
Garm ker ke dalna chiy yhe meja deti h
No.Port
I've done these projects in 1992 & 1993. These are not worth doing.
Bhai aap ka number chahiye bhai