Great video. It really works. I do it by myself. I bought the spare parts online and then I replace both in about 4 hours. My advice: 1. Do it with no rush; 2. Be careful when you are going to take away window commands; 3. Be careful with the handle cover, the first you are gonna to remove; 4. Remember to connect again all the wires. 5. Use a manual screwdriver!
Hola Fernando. Veo verdaderamente loable y valioso el hecho de que hagas vídeos de este tipo para los que no nos atrevemos a "meterle mano" a nuestro vehículo. Así nos animas y empujas a hacerlo. Esta operación que has hecho, en mi concesionario BMW me salía por "600 o 700 euros", me dijeron literalmente. He comprado los recambios en AliExpress por unos 15 euros las dos puertas y en cuanto me lleguen los reemplazo por los míos, con tu vídeo delante, por supuesto. Nada más. Gracias, gracias, gracias... y gracias.
Me encatado tu comentario. Mi alegarado lo dia. Si, lo haco los videos para las personas que lo quieren hacer-lo con poco dinero y poder gastar lo dinero en cosas más inportantes. Muchas gracias
Totalmente de acuerdo contigo. Yo compré las manetas en ali express y he dado con este tutorial para saber cómo hacerlo. Muchas gracias por tu video. ¿Tienes alguno de cómo cambiar la bomba del agua del limpiaparabrisas? Gracias de nuevo
I did the same thing for the passenger front door on an E91, but worked on the door panel disconnected from the cables in order to have more control of the whole process and without any risk of damaging the control cables during the procedure.
Fernando, I have my new mirror and I'm ready to remove the door panel and install it. My question sir is what style and size is the bit you used? Great video.
Hi and thank you for the video. I bought the replacement handle but I don't have the screw that appear in the video (14m:10s). What kind of screw are they or where I can get it?
Remove the door switch after taking the door panel off as in the video you can see that removing it first broke the front clip that secures the front of the switch down into the panel.
Amigo, sabes, no puedo sacar el cubre de la puerta... considerando que he sacado los dos tornillos y los botones del alza-vidrios ¿se le debe aplicar mucha fuerza para sacarlo? atento, gracias, saludos
I did this today and it was a fucking nightmare !! In the video which was very helpful by the way he pops everything off so easily I had to Yank with all my strength to remove Alot of stuff especially that Window switch I could not remove that I almost gave up! I ended up popping it from the inside not the outside like in the video it simply wouldn't pop off my freaking plastic tool broke in half in the process. It's finished door handle has been replaced but it was a horrible experience.
@@fernandomontenegroBMW thank you for your video without it I couldn't have done it Fernando. Maybe once I did it the parts should be more Loose haha everything was so SOOO tight and in your video it was so smooth and easy to pop off either way Great job, Muy bien Trabajo!
Hi, the part number OE is 07 14 7 381 506 watch this site bmwfans.info/parts-catalog/F31/Europe/320d-N47N/L-N/mar2013/browse/vehicle_trim/surface_mounted_parts_door_panel_front/
@@fernandomontenegroBMW km or miles? I just bought a 2014 320d whit 130000km or 80000miles and it has quite bad handle on the driver door where did you get the replacment part from i am from europe 😁ty for help man nice video btw
@@Wektore 62000 Miles or 100000km. I bought in ebay. The quality is good and is cheaper. www.ebay.com/itm/Inner-Trim-Door-Pull-Handle-Replacement-Left-Or-Right-For-BMW-F30-F35-F80-F82/312627256471?fits=Make%3ABMW&_trkparms=ispr%3D1&hash=item48ca095c97:m:mSkVAGTQd0EINfuGuUr2bnA
@@fernandomontenegroBMW thanks a lot you helped me a lot I will be ordering today and replacing when it arrives do you still own the car is it a 320d are you happy whit it D
@@Wektore I have a 320d from 2013, I'm very happy with it. I am also happy because I can do most of the revisions. when you can visit this site en.bmwfans.info/parts-catalog here you will find all parts for your car.
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
Wonderful!
I’ve been able to replace the two front door handle of my F31 in 1h30 thanks to your video!
Good job man. I am glad to help you. Thanks for you comment
Thank you so much. Very easy to follow. First time trying something like this and it went of without any explitives which is really saying something.
Welcome. Enjoy my videos. Thanks for your comment
God Bless you!! great job. Wish you had sound though but after watching twice I got it
Thanks. It's youtube song. Sorry. Enjoy the others movies.
Great video. It really works. I do it by myself. I bought the spare parts online and then I replace both in about 4 hours. My advice: 1. Do it with no rush; 2. Be careful when you are going to take away window commands; 3. Be careful with the handle cover, the first you are gonna to remove; 4. Remember to connect again all the wires. 5. Use a manual screwdriver!
Good work
After install my main window switch not working?
thank you for posting very helpful
Great video, easy to follow for first time DIY
Thanks
Excellent. Thanks for posting
Thank you, i wish you talked explaining each step. I dont understand why they had to make it more difficult than the first two screws
I agree, what's the point of removing those two screws if you have to take the whole F&^%ing panel off and drill out the screw holders?
Muchas gracias por compartir el video! Quiero poner una cinta Led en la puerta y no estaba seguro como desmontarla. Muy bien hecho el video!
Gracias por tu comentario. Estoy contento por ayudarte
Hola Fernando. Veo verdaderamente loable y valioso el hecho de que hagas vídeos de este tipo para los que no nos atrevemos a "meterle mano" a nuestro vehículo. Así nos animas y empujas a hacerlo. Esta operación que has hecho, en mi concesionario BMW me salía por "600 o 700 euros", me dijeron literalmente. He comprado los recambios en AliExpress por unos 15 euros las dos puertas y en cuanto me lleguen los reemplazo por los míos, con tu vídeo delante, por supuesto. Nada más. Gracias, gracias, gracias... y gracias.
Me encatado tu comentario. Mi alegarado lo dia. Si, lo haco los videos para las personas que lo quieren hacer-lo con poco dinero y poder gastar lo dinero en cosas más inportantes. Muchas gracias
Totalmente de acuerdo contigo. Yo compré las manetas en ali express y he dado con este tutorial para saber cómo hacerlo. Muchas gracias por tu video.
¿Tienes alguno de cómo cambiar la bomba del agua del limpiaparabrisas? Gracias de nuevo
Eres un profesional, gracias
Thank you Fernando
really appreciate your guides~
thanks for you comment
good job. i like so much your videos. thanks
I did the same thing for the passenger front door on an E91, but worked on the door panel disconnected from the cables in order to have more control of the whole process and without any risk of damaging the control cables during the procedure.
Pedro Monteiro thanks for your comment
Iiiiuiijhjjojnnnjnnnjnnjjjijjuojojikboh
THANKS A LOT FOR SHARING
Grazie mille, mi è stato molto utile questo video soprattutto per togliere la parte sotto il comando dei vetri elettrici (da forare con la punta)
Sono felice di averti aiutato. grazie per il tuo commento
Good Video
Fernando, I have my new mirror and I'm ready to remove the door panel and install it. My question sir is what style and size is the bit you used? Great video.
Will you remove the handle too? What bit do you refer?
Great vid would never have known how to do this otherwise
Nice. Thanks for your comment.
muchas gracias
Muy buen video,
Si pondrías decir qué medida de tornillos y arandelas usaste de favor saludos
los tornillos se suministran con las manijas de las puertas. Gracias per tu comentario
Muchas gracias por esto video. Me falta buscar el producto de sostituir y ya.
www.ebay.com/itm/Front-Inner-Door-Pull-Handle-L-R-for-BMW-F30-F80-F31-F32-F33-F35-M3-51417279311/113667608768?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D44fe43ca57dc41d9b39cde60aa53025a%26pid%3D100005%26rk%3D2%26rkt%3D12%26mehot%3Dco%26sd%3D401883616148%26itm%3D113667608768%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100005.m1851
Hi and thank you for the video. I bought the replacement handle but I don't have the screw that appear in the video (14m:10s). What kind of screw are they or where I can get it?
I bought the handle with screw. I think that You can buy the screw in iron shop.
@@fernandomontenegroBMWwhat is diameter and length of the screws please?
@@apoelara1980 sorry, i don't know
good job
No need to replace the handles, fix shown in this video th-cam.com/video/6Z5cx7g2N1w/w-d-xo.html
Super vidéo
Thanks for your comment
Merci bcp !!
Merci pour votre commentaire
Good! 👍
Thanks for your comment
Hi, where do you bought the handle kit with the scews?
I bought in ebay
muy bueno. sos un genio
Gracias per tu comentario. 👍
Remove the door switch after taking the door panel off as in the video you can see that removing it first broke the front clip that secures the front of the switch down into the panel.
thanks for your suggestion
Amigo, sabes, no puedo sacar el cubre de la puerta...
considerando que he sacado los dos tornillos y los botones del alza-vidrios
¿se le debe aplicar mucha fuerza para sacarlo?
atento, gracias, saludos
Si, tienes que hacer un poco de fuerza. Intenta hacerlo comezando per le parte de bajo
@@fernandomontenegroBMW Excelente!!!!! Muchas gracias por tu pronta respuesta.
ya estoy Suscrito!... saludos desde Chile
@@cristianosoriogutierrez76 gracias de Portugal
Dankeschön
vielen Dank für Ihren Kommentar
Hello, can I have the links to order the parts please? I think I found the handles on aliexpress but I can't find the spare fixings.
Hi, check this site
bmwfans.info/parts-catalog/F31/Europe/320d-N47N/L-N/mar2013/browse/vehicle_trim/surface_mounted_parts_door_panel_front/
Thanks.
welcome
Does this procedure apply exactly to an F34? I mean, are there differences between the places where you need to use the drilling machine?
it is very similar or almost the same, but if there is a different hole I think you can verify it
Same process but the plastic welded holes at the bottom of the handle are in slightly different different places. Doing a video on this very soon!
@@supremegt waiting for it. Thank you!
THX!!
Thanks for your comment.
My father in law appreciate your video jajaja
😁 thanks for your comment
I did this today and it was a fucking nightmare !! In the video which was very helpful by the way he pops everything off so easily I had to Yank with all my strength to remove Alot of stuff especially that Window switch I could not remove that I almost gave up! I ended up popping it from the inside not the outside like in the video it simply wouldn't pop off my freaking plastic tool broke in half in the process. It's finished door handle has been replaced but it was a horrible experience.
it is true my friend, it is a horrible experience. that's why I made this film, to help everyone. Thanks for your comment.
@@fernandomontenegroBMW thank you for your video without it I couldn't have done it Fernando. Maybe once I did it the parts should be more Loose haha everything was so SOOO tight and in your video it was so smooth and easy to pop off either way Great job, Muy bien Trabajo!
Hello where did you bought the handle
I bought in ebay
My window switch not working after install any idea why not?
Check the switch connection or the cable
Comprou a peça na cc/ebay/importou? att
Fernando Scherer comprei no ebay. Retirei o codigo original no site da BMW e pesquisei no ebay. Abraço
@@fernandomontenegroBMW Can you paste here the original code from the BMW site please?
bmwfans.info/parts-catalog/F31/Europe/320d-N47N/L-N/jun2013/browse/vehicle_trim/surface_mounted_parts_door_panel_front
@@juanjosegomez2258 part 22
Freakin over engineered. Pissed me off. It was easier when I did my x5 e70. 3 door handles in 10mins. Now this one is a nightmare 😫
yes, is true my friend.
What is the part number OE??
Hi, the part number OE is 07 14 7 381 506
watch this site
bmwfans.info/parts-catalog/F31/Europe/320d-N47N/L-N/mar2013/browse/vehicle_trim/surface_mounted_parts_door_panel_front/
I have a simple remedy for this. I used women Natural Nail Polish to coat the handle. You have to apply at least two coats. It dries within seconds.
yow man how much mileage on the car please answer D
62000
@@fernandomontenegroBMW km or miles? I just bought a 2014 320d whit 130000km or 80000miles and it has quite bad handle on the driver door where did you get the replacment part from i am from europe 😁ty for help man nice video btw
@@Wektore 62000 Miles or 100000km. I bought in ebay. The quality is good and is cheaper. www.ebay.com/itm/Inner-Trim-Door-Pull-Handle-Replacement-Left-Or-Right-For-BMW-F30-F35-F80-F82/312627256471?fits=Make%3ABMW&_trkparms=ispr%3D1&hash=item48ca095c97:m:mSkVAGTQd0EINfuGuUr2bnA
@@fernandomontenegroBMW thanks a lot you helped me a lot I will be ordering today and replacing when it arrives do you still own the car is it a 320d are you happy whit it D
@@Wektore I have a 320d from 2013, I'm very happy with it. I am also happy because I can do most of the revisions. when you can visit this site en.bmwfans.info/parts-catalog here you will find all parts for your car.
Nothing like having a mute try to show you how to do something. Lose the music and talk us through it.
ok… this is a lot of work
i’m just gonna place same carbon fibre wrap over the rubber that’s breaking off instead lol
it's not a perfect job but the important thing is that it gets resolved for you
bmw sometimes make things difficult for us to diy...probably to rip off customers sometimes 😢
everything can be resolved. I created this channel so that people can solve some problems and carry out car maintenance.
Excellet video. thanks for sharing