DIY Waterproof Waxed String Friendship Bracelets Inspired by Pura Vida Bracelets
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- A cheap, waterproof bracelet DIY! I hope you guys like the tutorial!
Buy me a coffee: www.buymeacoffee.com/knackfor...
** My favourite supplies for bracelet making in 2021 ** knackforknots.com/my-favorite...
** Check out my blog post about waxed polyester cord (knackforknots.com/waxed-polye..., or see below for links to purchase!**
*Where to Purchase Waxed Polyester Cord*
*** Assorted Pack of 10: amzn.to/2YK6wxs ***
*** Single Colour Rolls (30 yards per Skein): ***
-- Black: amzn.to/2JWdTOp
-- Turquoise: amzn.to/2HvgoW5
-- Coral: amzn.to/2M5cw2H
-- Grey: amzn.to/2YIw6TA
-- Mint: amzn.to/2JUcHek
-- Purple: amzn.to/2YIUTqB
-- Fuchsia: amzn.to/2EqvquG
-- Blue: amzn.to/2M3nAx0
-- Teal: amzn.to/2EsgtIf
-- Lilac: amzn.to/2VXwp03
-- Pink: amzn.to/2JW713v
-- Charcoal: amzn.to/2ElySXl
*** Spools (180 yards per spool): ***
-- White: amzn.to/2waYnGm
If you don't have waxed polyester cord, I recommend this glue to seal the ends of your bracelet:
amzn.to/31spR7O
Waxed String bracelet tutorials:
DIY Waterproof Waxed String Friendship Bracelets: • DIY Waterproof Waxed S...
3 MORE WAX STRING BRACELETS: • 3 Easy DIY Wax String ...
SEED BEAD BRACELETS • DIY Seed Bead Wax Stri...
FLAT BRAID BRACELET • Flat Braid Waxed Strin...
Heart Charms from:
- etsy.me/1ZBAiQ1
Square knot tutorial:
- bit.ly/1MHwBRp
** Where to find me **
Website: knackforknots.com/
Etsy: etsy.me/1UP1DP9
** Follow me on social media **
/ knackforknots
/ knackforknots
Music:
"Acoustic Breeze" from www.bensound.com/
pura vida bracelet diy, pura vida bracelets, waterproof friendship bracelets, Canadian crafts, puravida, puravida bracelets, bracelets like pura vida, how to make Pura Vida Bracelets, how to make Puravida bracelets diy puravida bracelets, make your own pura vida bracelets, pura vida bracelet tutorial, puravidabracelets - แนวปฏิบัติและการใช้ชีวิต
![[HIGHLIGHT] หมีLIVEปะ? | EP.171 เห็นแต่ในจอ วันนี้มาต้องขอคารวะ](http://i.ytimg.com/vi/gPWLxa0e_Z8/mqdefault.jpg)
Thanks so much for watching my tutorial! I would be super grateful if you would subscribe to my channel if you haven't already! ❤️
Please check out my waxed polyester cord blog post here (including where to buy cord if you cannot find it on Amazon): knackforknots.com/waxed-polyester-cord/
My favourite bracelet-making supplies in 2021: knackforknots.com/my-favorite-bracelet-making-supplies-in-2021/
✨What is your favourite kind of summer jewelry to make? Leave a comment below! 😃
thank you for this 😍 I used embroidery thread and clear nail polish instead of burning the threads and it worked perfectly!
please explain how you used the clear nail polish???? i’m using embroidery thread and would like to use your tips!
Marie I assume that she put it on the ends after knotting it to seal it in, like how burning the wax sealed it in
yes that's exactly what I did!
@@mariep5227 I cut the ends super short after knotting the threads & then put clear nail polish over them to seal them! hope that helps! 💗
@@kayxoxo256 how do they hold up not being waxed when you get them wet? im using hemp thread and wonder if it will be ok
Finally found a tutorial how to make these 😃 Gosh! I've been lookin for a tutorial for YEARS!!!!
Yay! I hope you found the tutorial helpful! :) Thanks so much for watching! Have fun creating!
It was a really helpful tutorial . Thanks for making such video and also I subbed to your channel . Keep posting new videos like this .........😊
thank you for posting this. This is exactly what we've been looking months for
Thanks so much for watching! I hope it helped :)
OMG thank you so much ❤️ for the tutorial I've been looking everywhere for a good one
I just gotta say… your tutorial was the easiest to follow. You’re amazing at the domain step by step. 😊
I'm wearing two pura vida bracelets right now
Hehe, me too
im wearing 5 hehe
I broke one of mine so I only have one with a pineapple on it
SAME!
Same
Thank you wo much! Took me about 5 minutes to make one!! Proud to wear it literally EVERYWHERE thanks to the waterproof quality!!
Yes girl! Thank you!
Great tutorial!!! I love how you made them yourself. I've invested alot of money into pura Vida bracelets
(>$200 including using %off codes and I'm in canada) . They are pricey but awesome. But I'm crafty top and totally inspired by your tutorial!! Thanks! Awesome job!!
+neonfreak52 Thank you so much!!! I really hope it helped :) and I can totally relate to that haha! Not only shipping costs but with the awful conversion rate right now for CAD to USD, my addiction to Pura Vida Bracelets was becoming extremely expensive! Thank you so much for watching :)
Cassandra RVT use delighted50 for 50% off
I'm really gonna have to try making some of these! Thanks for uploading! 😊
+Ca Monstergurl Let me know how they go! :D Thanks so much for watching! :)
I can't wait to get started! Thank you for sharing!
No problem! :) Best of luck!
This is amazing! Thank you for sharing! I’m just like you , I drive my self crazy trying to figure out how they do it ! 🥰🥰🥰
Thank you so much! Glad to know I'm not the only one! 😂 Have fun creating! 🥰
Just made one on my first try so easy! Thanks for the great tutorial!
Amazing! I am so happy to hear this! Thanks so much for watching! :)
Working on a new video soon!! Let me know what you'd like to see next :)
Can you make gothic bracelets?
I have a number of Pura Vida bracelets I've had for at least six years now - and I've even made a few of my own, but I was really grateful to see a tutorial on here so that I could improve my technique. Thanks so much for posting this! I want to make the new seed bead version as well, which, (as far as I can tell) involves unraveling the cord and using only one of the strands for the bracelet part, and then completing the rest of the bracelet normally. The specialty bracelets are so much more expensive!
again, thanks!!
+kag240 Thank you so so much! :D I have been trying to figure out a good way to make the seed bead bracelets as well, they are so beautiful! When I figure it out, I'll be sure to share it! Thanks for watching :)
I was looking for this for a long time, thaanx
+jay M no problem, I hope it helped!!! Thank you so much for watching :)
Thank you SOOOOO much for this!! I've been trying to figure out how to make these. And trying to purchase the thread isn't exactly easy. They don't seem to carry it at the craft stores. Not the kind that you can melt with a lighter, anyway. THANK YOU!!
you're so creative and the video is done well. thank you!
Thanks for the kind comment! I hope the tutorial was helpful. Thanks so much for watching! :)
i did this tutorial and the bracelet is great!! the thing is, for the lighter part i burned myself and my dad burned himself numerous times so i would recommend having parental supervision when using the lighter.
Thank you so much for sharing this tutorial with all of us. You made this so easy to understand and the music made it even more enjoyable. I will make some.for my kids.
Thanks so much, Laura! Hope you enjoy making the bracelets 😊
Wow!!! You're so talented!!!!! I love this😮🤩💗
Thank you so much for your kind comment!! 💗🤗 & thank you so much for watching!
Just ordered three pura vida bracelets!!
can you make tutorials on each bracelet that you know how?! this is such a money saver!! luv it
+kelley nghe haha thank you so much! And yes, I plan to! :D I ordered some more string so hopefully it will be here in the next 2 weeks after my final exams for this semester! :D thank you so much for watching!
I'm going to be trying this now!
Yay, that's exciting! I hope you have fun making them ☺
Thank you!! This is great. Waving to fellow Canadian !
Yay! Hi from British Columbia 👋 hope you're staying healthy and safe! Thank you so much for watching! 😊
Beautiful ❤👏👏👏
❤very good ty love it
tysm! this is rlly helpful
Thanks so much for your kind comment and for watching my tutorial! I hope you have fun making these bracelets ☺
This video really helped me figure out how to make these! Thanks for doing this!!! Also, it'd be great if you could do some tutorials on other pura vida bracelets like: seed bead bracelets, the thick braided ones, studded ones, flat braided ones, track bead ones, etc. Thanks so much for this awesome video though!
+Erin D thank you for watching, I am so glad you found it helpful! I am currently editing another Pura Vida inspired tutorial and waiting for more string to arrive in the mail! I can't wait to share more, so stay tuned! :)
+Knack for Knots Great! I can't wait!!!!
that’s awesome ! i get mine from pura vida and they’re so expensive !! thank youuu
Absolutely - especially if you are located outside the USA! Thanks so much for watching and have fun creating!! 🤗
the bottom of my bracelet always comes untwisted how to i keep that from happening?
You did a great job! 💕
Way better than mine lol
love these bracelets their the best i sell them and make lots of money doing it.Great job with this hack. i liked and subscribed.
Congratulations on your successful business! That's so awesome! 😊 Wishing you all the best 😊💗 thanks for liking the video & for subscribing 💕 hope you're staying healthy & safe!
Oh my gosh! Thank you so much for this!! I think Pura vida is a bit overpriced, so I live how easily you can just make your own. ♥️❤️🌸🌺
Thank you so much !!!!❤
Thank you sooo much, I love Pura Vida bracelets but they can be a bit expensive! 😂❤️
Hi, Natasha! Thanks so much for watching :)
I love making, wearing, and sharing these bracelets. Thanks for the tutorial! Do you happen to have a "formula" for the lengths of string preferred for making these in children's sizes?
Here's an updated list on where to purchase waxed polyester cord:
**** Assorted Pack of 10: amzn.to/2YK6wxs ****
**** Single Colour Rolls (30 yards per Skein): ****
-- Black: amzn.to/2JWdTOp
-- Turquoise: amzn.to/2HvgoW5
-- Coral: amzn.to/2M5cw2H
-- Grey: amzn.to/2YIw6TA
-- Mint: amzn.to/2JUcHek
-- Purple: amzn.to/2YIUTqB
-- Fuchsia: amzn.to/2EqvquG
-- Blue: amzn.to/2M3nAx0
-- Teal: amzn.to/2EsgtIf
-- Lilac: amzn.to/2VXwp03
-- Pink: amzn.to/2JW713v
-- Charcoal: amzn.to/2ElySXl
**** Spools (180 yards per spool): ****
-- White: amzn.to/2waYnGm
-- Black: amzn.to/2EqRjtz
Knack for Knots do you have any tips for twisting the string then tieing it? I had some trouble when tieing it because most of the time it came loose
Aesthetic Scribbles hi um what My suggestion is to twist both of the individual strings to the right and twist them to the left when you twist them together if that makes any sense
Abigail Conlon that helped a lot! Thanks so much! 😊
I actually have an Etsy shop selling these now!
very pretty
+Crafter girl thank you so much! :D
great video!
Thank u!
Thanks so much for watching! 🥰 I hope you're staying healthy and safe!
I have on four pura vida bracelets on right now
Thank you
you're welcome! Thanks so much for watching :)
I've been searching for days what kind of string they used to make those Pura Vida bracelets. I hope I can find a store here that supply those strings, if not, I will probably have to order online. Thanks for this!
Hey! I bought my string here: etsy.me/1PvP3MI. I havent found a store in my area that supplies this type of string either :( I hope the tutorial was helpful!
Knack for Knots Yey, thanks for the link! 🤗
love the video! Can I make these with regular friendship bracelet string?
i think so, but instead of melting (because you need wax on the string to have it melt) use clear nail polish or a drop of hot glue. it also wouldn't be waterproof without wax string.
Is there a way to get rid of the brown wax left over after you melt it?
+Emily Forbes Over time, the brown wax colouring has gone away a lot (I wear the bracelet I made in the tutorial almost every day!). My theory with this is that I let the string catch fire for too long, contributing to the discolouration of the string because it got so burnt. From my observations of the Pura Vida videos, they seem to be much more careful when they melt the wax, just barely letting the flame touch the string to melt the wax and seal the bracelet. This is definitely a technique I will need to improve on. Best of luck, and thank you so much for watching my tutorial! :)
instead of burning it u could use clear nail polish
wowww, she sure has knack for knots (oops i almost spelled knot as nots and then did it again when i did the () think, anywho back to you!!)
bahahahahahaha oh natalie peiken i cant believe its you i love your videos and hannah so much!!! please post some more your fans miss you. u got me through mh ddepression and back again when i relapsed :( you vlogs gave me a reason to live, simple as thast.luv uuuu
I made my own adjustable one but not as easily ( took about 45 minutes to make) and can we do this with friendship string?
Thanks for this video, my daughter wants one of these and now I can make it for her. Can you clean off the dark from burning down the ends of the thread??
Yes, I have found that you can scrape off a bit of the burnt parts of the ends. Another thing I found (which I learned after making this video) was to ensure that the strings are not submerged in the flame. Instead, I'd advise to keep the ends you are trying to melt close enough to the flame to melt it, but not in it. Best of luck! Thanks so much for watching!
Don't let the wax and cord flame. Just melt it an no black burnt color :)
If you do accidentally burn the ends, try a nail file to buff off the dark part.
Thanks so much for the video! I have made many string bracelets, (after purchasing Pura Vida) but could not figure out how to transition from the nine strands to the clasp ties without a huge knot. Is there a method to melt but not burn the wax? I am not fond of the blackend melted bits. Thanks again!
Hi there! Thanks so much for watching. To melt the ends, hold the string close to the flame (approximately 0.5-1 cm away) and do not submerge it. I definitely did not do this in the video 😅 Hope that helps!!
Thanks for this good tutorial!! Can I use cotton waxed cord, too? Do you know if pura vida uses cotton or polyester?
Hello Martha! Pura Vida uses Waxed Polyester cord! Cotton waxed cord does not withstand water and wear as well as polyester! Hope that helps :)
I can’t make the twisted and stay twisted. I twist them and then they un-twist on their own. What am I doing wrong?
Hi! When you are twisting the strands together, 1) make sure that they are being twisted in the same direction as the twist pre-existing in the cord and 2) make sure you are twisting each in the same direction. Hopefully that helps! Thank you so much for watching! :)
After you twist both strands, instead of letting go of the strands to let them twist, let go of the bracelet while holding the ends of the 2 strands. That will allow them to twist MUCH better! Hope that makes sense! ❤️
Haha yesssss
I made like ten it’s so easy but I didn’t use wax stuff. It still worked
That's so awesome! What kind of cord did you use instead?
Knack for Knots I used pink blue and purple
@@soniatheawesomedancer2857 Sounds beautiful!! 😀
Is there a way to do it without burning your string possibly?
I love making my own bracelets and anklets! This design is so so cute. I was wondering if I wanted to make it for my ankle how much would I have to increase the lenght...any estimates? Also does it have to be wax string? Could it be just regular thread that is used for friendship bracelets? Thank so much!
Hey! I usually add 3 inches to the bracelet strands to make them into anklets! The ties and closure knot string should be the same.
For the cord, I recommend the waxed polyester cord because it seals so nicely with the flame. Perhaps with some type of textile glue you'd be able to accomplish something similar with the friendship bracelet embroidery floss or craft thread? But I haven't tried it!
Best of luck! Thanks so much for watching :)
When I make my bracelet and I twist the stings and make the knot the string unravels any tips?
You cut it off right when you made the loop…did you put the loop on or just tie it normal on or around that point?
So I'm one that doesn't like to spend much when I can make something at home. I don't have the waxed thread at home or beeswax! Do you know any replacements for beeswax? Maybe even a candle?
Can waxed cotton or waxed linen be used or polyester that doesn’t say waxed? Funny, I have everything except what I need!
Thank you!!
Hi, Sherri! You can definitely use different types of cord, however, I am uncertain how well the waxed cotton or linen cords will melt (as I have not tried them myself). Perhaps carefully try a small test piece before starting. If it doesn't melt nicely, you can use a jewelry adhesive or perhaps clear nail polish to seal the ends instead. Hope that helps! Thanks so much for watching :)
Can I use embroidery thread?
Can it be with embroidery floss
I looked on Amazon for the wax cord you recommended and it said it was no longer available, 😢 do you have any other wax cord recommendations?
I am having a hard time twisting the ties strings. Can you give any additional information on that?
Me to!!!! I have no idea how to get them to stay they keep going back to the untwisted when I tie it...
Hi! Great tutorial! I am going to try this, but I bought hemp cord and I use beeswax to wax it. Will beeswax work?
+SimplyAng 7 I don't know too much about beeswax but I googled it and it seems like people use it to waterproof boots and jackets so it will probably work! :) thanks so much for watching and best of luck!!
yes
The string is also called cotton string (just to let you know if you can’t find wax string at your store)
How do you get the strings to stay twisted? Mine seem to untwist
That's the problem I'm having! Over time, they unravel.
Hi! Thanks for the tutorial. Do you know where in North America you could buy that wax cord? And do you the cord thickenss that you are using?
Hey! I don't shop from any vendors who sell from North America at this time. The cord thickness I use is 1mm :)
I'm gonna be making these soon and I purchased waxed linen 4ply thread from an Etsy shop called UberArt. Super affordable and you can buy some color sets too
Whats the size type of wax cord please?
Could the charm be put onto the strands instead of the end of the strands?
Absolutely! Though it might be a bit uncomfortable to wear if it's a heavy charm on one of the strands (because it will slide around a lot)
Hi!! I've been interested in The Pura Vida bracelets for a while. I would like to know exactly what type string to use. I know you posted the site you purchased from, but I would like to know what size the string is and what it is made of. the site has many.
I use the 1mm "Linhasita Waxed Polyester Cord" from the ExoticBrazilian shop on Etsy! I usually buy 16yards of each colour, or the sets with 6 colours x 16 yards! I hope that helps :)
Hi! So I actually bought some cord (before I watched this) from the same place you said you bought yours on etsy, and it was good quality but the cord was pretty sticky. Is all waxed polyester string like that or is there something I should do? Thanks!
It's super sticky at first but once you wear it in the water once or twice, it's perfect! I know it can get kind of annoying when you're trying to handle it a lot, it leaves wax on your fingers. But it's definitely worth it :) Best of luck!!
Thanks so much!
Is there a way to remove the burned/ charred end of the string?
Over time, the charred ends will fade. I would recommend holding the strings close to the flame but not directly in it to avoid the charred ends. I didn't do a good job showing that part! Have fun creating 😃
Anyone else make their own wax coated thread and there’s isn’t melting? Mine is just getting black, charred, and burning rather than melting together😫😫😫
Hey! I've read some other success stories of people using waterproof craft or jewelry glue to seal the ends when using other types of materials. I recently tried this and hope to have a tutorial about it soon, although my school tasks have been taking up most of my time as of late! I have tried making my own waxed cord as well by using beeswax and embroidery floss and it simply burned :( Hopefully this helps! Best of luck and thanks so much for watching my tutorial!
Hello I would like to know where I can find the triangle charm that’s the picture in the video shows. Thank you!
Hey! I purchased those charms from a shop called "Bohemian Findings"! You can also search for charms & other jewelry findings on Etsy :) Hope that helps! Thanks so much for watching 💗
Very nice - I saw a video by beadsbaublesandjewels.com; the only thing done differently, which seems important to note, is that they used a mini torch, and did not put the ends right into the flame - just get it close enough to the heat to melt the ends, not burn them - and you won't be left with the black, burnt ends!
That is great advice!! Thank you! I get impatient and just submerge the cord into the flames 😅
Hey there! Do you find that the closure loosens over time causing the bracelet to start sagging?
Hey Annie! I personally haven't had an issue with this before. my suggestion is to ensure the square knotted closure is tied as tight as possible before you seal the ends :) Best of luck!
Can we use regular embroidery thread? Not waxed?
You can but it wont be waterproof
Not really because the thread will catch on fire
u cant seal the embroidery thread with the fire bc it isn’t wax coated but u can probably use glue or something at the ends
Wish I had a frien.
How do you make the twists stay every time I make the twists they come undone
Hey! When you are twisting the strands together: 1) make sure that they are being twisted in the same direction as the twist pre-existing in the cord and 2) make sure you are twisting each cord in the same direction. Hopefully that helps! Thank you so much for watching! :)
do i have to use waxed thread or can i just use regular thread
I'd highly recommend using the waxed polyester cord. The cord melts nicely so you can seal the ends. If you choose to use other cord, you may not be able to seal the ends in the same way. Instead, you could use some textile/jewelry glue. However, I have not tried that myself.
You can purchase the waxed polyester cord here: amzn.to/2YK6wxs
Happy knotting!
Is this possible to maybe do with embroidery floss?
Hi! I would not recommend embroidery floss if you plan on melting the ends to seal them. If you decide to use embroidery floss, I'd recommend purchasing some more specific jewelry cement from Michael's Crafts!
Do you have to use wax coated string? Will the melting still work without the wax coating?
Hey, Mackenzie! If you don't use wax coated string, the ends of the string will just burn (ie. not melt/fuse together). An alternative is to seal the ends with a jewelry glue or some other waterproof glue!
Haha your gonna put them out of business !
What do you do with out burning it bc I don’t have light lol
You can use jewelry glue instead!! I use the "hypo cement" jewelry glue from Michaels Crafts! 🙂
Where do you buy the waxed string ??? By the way good toutorial
Thanks so much! You can buy them on Amazon here:
** Assorted Pack of 10: amzn.to/2YK6wxs **
** Single Colour Rolls (30 yards per Skein): **
-- Black: amzn.to/2JWdTOp
-- Turquoise: amzn.to/2HvgoW5
(and many more colours available on Amazon :) )
Anyone know if you can burn down embroidery thread?
Hey Alli! I don't recommend burning embroidery thread. I have tried it and it just goes up in flames :( I recommend trying some jewelry adhesive instead, such as "G-S Hypo Cement" or even fabric glue, both of which you can get at Michael's Crafts!
Thanks, I'm using a waxed cotton cord, but the flame didn't work. It looks like incense instead of melting a ball.
Hey! Instead, you can try clear nailpolish or jewerly glue to seal the ends if the string isn't melting properly. Thanks so much for watching! :)
Hi i know I am super late but I was just wondering how long your wax string took to come in because mine was it will be 1 business day but it is all the way from Brazil so I am scared
Hi! I ship from Canada, so depending on where you are located, it could take 1-2 weeks to arrive! I hope that helps :)
Would waxed Brazilian cord work the same
From my brief Google search of "waxed Brazilian cord," I believe it will! It appears to be the same waxed polyester cord I show here :) Happy knotting!
where did you get ur charms from? I have been looking for charms for so long and I can’t find any!!!!
Hi Meredith! I purchase the majority of my charms on Etsy 😃 If there is a specific charm you are looking for, I can give you some shop recommendations 😊 I mostly order from Canadian jewelry supply vendors on the platform.
I'm stuck with something. I'm at the part of doing the braids at the ends for the ties. I twisted each string and then twisted them together. Then I tied the knot, but then it comes unraveled and it's just two strings with a knot at the end. How can I fix this?
Thanks for your comment. Make sure that you are twisting the cords in the same direction. When you are twisting, it's also important to make sure they are going in the same direction as the pre-existing twist in the cord. Hopefully this will work out for you 🙂 thanks so much for watching! I hope you're staying healthy and safe during this time!
i figured out how to wash almost all the wax off 😂
Do you have to seal the ends? Or can you leave it with the strings poking out because I don’t have anything for that
Thanks for your question! You can leave them poking out if you wish, although I cannot state how the bracelet will hold up to wear over time. Make sure the knots are really tight around each of the ends. In addition, the unsealed ends of the square knot adjuster will likely come undone easily - you may have to cut a longer piece for the last step and get creative with adding more knots to ensure it stays secure. Hope that helps! 😊
@@knackforknots ok thanks so much!
Where do you buy your charms? Thanks so much!
Hey! You can buy charms here: amzn.to/2ZFsbYl or on Etsy!
do you have to have the exact string
anything that seals nicely :) I like the waxed polyester cord because it doesnt catch fire like other types of waxed string do.
Is there any other thread / string material you can use ?
Hey Dana. I recommend the waxed polyester cord because it melts nicely. You could try other string but I don't advise trying to burn the ends. You might be able to use a special jewelry glue to seal the ends instead, which you can get from Michael's Crafts!
Is this .5mm or 1mm thickness of the string?
1mm :)
Can you do this without wax thread?🧶
Hi! Yes, you can modify this to make the bracelets without wax thread. However, you won't be able to seal the ends by burning them! Instead, you can secure the ends with a jewelry or textile glue. Hope this helps! Thanks so much for watching :)
I know I'm really really late but why does it have to wax coated string?
Hi Kristen! I recommend wax coated polyester cord because it melts well and does not completely catch fire when you seal the ends of the bracelet :)