@@Ls.nando05 when I first got them I put them in the box my Legacy subs came in. I was running a sherwood bp series amp at 2 ohms. I don't remember the power but the day after I installed them they literally blew the box apart lol. After that I ran them off a jensen 600 4 channel bridged to 2ohm in a bandpass box. After that I ran them on an MTX amp. I don't remember power or model. I was running a kenwood head into a passive crossover with 1 amp for subs and 1 for mids and highs. Had jbl 3 way 5x7 coaxials in the rear and jbl 6" components with 1" tweeters and inline crossovers in front. 2 guage power and ground with a 1 farad capacitor. 4 guage after distribution block to amps.
@@vincentgibson3049 Niceee. The ones I have are 10s but 8ohms so I can only wire them to 4 ohms. The amp I have is rated 400watts at 4 ohms so they’re I’ll be a little underpowered but I’ve heard they have a high sensitivity so they don’t need much power
@@Ls.nando05 400 watts is plenty of power. A friend of mine had the same 12s years after I sold mine. She had them in a sealed box in the trunk of a box Crown Vic. They were just as loud as mine were. Her shit was banging. The cones are a kevlar and wood pulp composite. I once had 4 12" kicker comps and 2 10" kicker comps in a hatchback escort lol but the 2 vegas were louder honestly...
I miss my vegas. I had those same vegas back in like 97. Loudest 12s I ever had. They pounded so frigging hard it was ridiculous.
I have 2 10s what amp did you use and what was the power rating at the ohms u were rubbing
running
@@Ls.nando05 when I first got them I put them in the box my Legacy subs came in. I was running a sherwood bp series amp at 2 ohms. I don't remember the power but the day after I installed them they literally blew the box apart lol. After that I ran them off a jensen 600 4 channel bridged to 2ohm in a bandpass box. After that I ran them on an MTX amp. I don't remember power or model. I was running a kenwood head into a passive crossover with 1 amp for subs and 1 for mids and highs. Had jbl 3 way 5x7 coaxials in the rear and jbl 6" components with 1" tweeters and inline crossovers in front. 2 guage power and ground with a 1 farad capacitor. 4 guage after distribution block to amps.
@@vincentgibson3049 Niceee. The ones I have are 10s but 8ohms so I can only wire them to 4 ohms. The amp I have is rated 400watts at 4 ohms so they’re I’ll be a little underpowered but I’ve heard they have a high sensitivity so they don’t need much power
@@Ls.nando05 400 watts is plenty of power. A friend of mine had the same 12s years after I sold mine. She had them in a sealed box in the trunk of a box Crown Vic. They were just as loud as mine were. Her shit was banging. The cones are a kevlar and wood pulp composite. I once had 4 12" kicker comps and 2 10" kicker comps in a hatchback escort lol but the 2 vegas were louder honestly...
Dude use mdf for boxes
Qui,Come si mette in cattiva luce un bel sub....
tracklist?
I have 2 of these but this sounds like ass!!! Compared to mine🤷🏼♂️
Probably microphone amplifier or damage coil or The fact is using a Bluetooth speaker as a amplifier