Modeling a Civil 3D corridor with variable slope daylight

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 79

  • @norielgarcia9379
    @norielgarcia9379 8 หลายเดือนก่อน

    Thank you for this Jeff. As a newbie civil 3d user, your tutorial vids are incredibly help me a lot.

  • @donpritt5160
    @donpritt5160 5 ปีที่แล้ว +7

    I know this has been on here for a while, but this was a huge help for me recently in building my corridors and it worked with C3D 2019.

  • @kiyagaedwin
    @kiyagaedwin 8 ปีที่แล้ว

    The ANZ country kit has a good assembly built in to help,but you are doing a good job at helping people

  • @AngryCagen
    @AngryCagen 9 ปีที่แล้ว +1

    Thanks for sharing such an amazing tool along with the actual subassembly! You Rock Jeff!!

  • @bconnler
    @bconnler 8 ปีที่แล้ว +6

    There should be a better way of handling transitions though, natively without a custom subassembly, With this method I have to have a new assembly every time i want to make a different transition. Not to mention I have to make sure that every other use who opens my drawing has to have the custom subassembly added.
    I would really rather see this transition to be managed similar to the way super elevation is managed. Using a profileview and a profile that represents "slope". 12D an Australian road design package manages these transitions a lot better

  • @utsavpanta8460
    @utsavpanta8460 4 ปีที่แล้ว

    thanks Jeff.... for another very useful tool

  • @58naguilar
    @58naguilar 7 ปีที่แล้ว +1

    Thanks a lot Jeff, your tutorials are great!!!

  • @naseeryounasbhatti1077
    @naseeryounasbhatti1077 5 ปีที่แล้ว

    Sir, its really amazing tip to control civil 3d label scale. Thanks for the same.

  • @albertopineda3910
    @albertopineda3910 5 ปีที่แล้ว +2

    I really respect you Jeff but Civil3D is very late in quite a lot things: ground rehabilitation by substitution(saneo escalones de liga), lanes of desceleration, frontier line where slope croses in highway interchange

  • @modulefarm4562
    @modulefarm4562 2 ปีที่แล้ว

    Very insightful thank you.

  • @ILYASKHAN-pp6mb
    @ILYASKHAN-pp6mb 3 ปีที่แล้ว

    Thank you So Much Sir for Providing this PKT file

  • @w.ar.m.o.t7012
    @w.ar.m.o.t7012 2 ปีที่แล้ว

    Thank you

  • @MrLikeidontcare
    @MrLikeidontcare 5 ปีที่แล้ว

    Wow this is really great!

  • @philippinepropecyrobinos1841
    @philippinepropecyrobinos1841 7 หลายเดือนก่อน

    Is there any video regarding modeling variable height of stone masonry wall?

  • @hailu4329
    @hailu4329 4 ปีที่แล้ว

    Thanks for your sharing, it's very useful.

  • @marinagillott3997
    @marinagillott3997 ปีที่แล้ว

    Hey Jeff, your videos always help me a lot. I am new(ish) to Civil 3D. Is there a way for me to use this subassembly with a target polyline/feature line instead of a surface? I am using C3D 2020 and 2021. maybe this could be another video?

  • @EngrRajaSherazAhmed
    @EngrRajaSherazAhmed 3 ปีที่แล้ว

    Thanks for Sharing the link.

  • @elsadigsulieman7898
    @elsadigsulieman7898 8 ปีที่แล้ว

    you did very nice job thanks

  • @alexistgr
    @alexistgr 3 ปีที่แล้ว

    Thank you so much sir!

  • @manalz4448
    @manalz4448 2 ปีที่แล้ว

    you are best in what u do :D

  • @schultzyyd
    @schultzyyd 8 ปีที่แล้ว

    beautiful bro beautiful

  • @Nack23
    @Nack23 8 ปีที่แล้ว

    Hi!
    May I ask how could I create an assembly for a road, where you want the top of the road to be as level as possible to the existing ground. So you cut the road into the existing ground. I would like to show in section view also the cutout part. So i need to get a link from the edge of the pave to the existing ground (link slope to surface) as a vertical planning fill. And i need to intersect cutout link (from the edge of base 1:1) with it. Is it possible to create such an assembly..or does it always have to be continuous? At the moment my assembly tries to lengthen all links from the edge to the furthest (as it couldnt just end where it is supposed to.

  • @jthomas4057
    @jthomas4057 7 ปีที่แล้ว

    Thank you very much sir. This will be very useful on an upcoming project I have in the near future. Your videos are very informative.

  • @jamie2186
    @jamie2186 7 ปีที่แล้ว

    Hi I've been doing several corridors and am getting used to the process of constructing one however, my query is could you tell me how I get about changing the default properties of a corridor. So that its not the default green and blue color. Could you recommend a nice layout for me basically.

  • @richardwilmarsalascaballer8746
    @richardwilmarsalascaballer8746 4 ปีที่แล้ว

    Muy interesante el video, haber si sube otro video para aprender a crear esos taludes en transiciones con el subasemblies composer. Saludos desde Perú

  • @玉波-t2f
    @玉波-t2f 6 ปีที่แล้ว

    very good!

  • @hovoasatryan6855
    @hovoasatryan6855 6 ปีที่แล้ว

    Hi everyone ,, Unfortunately I can't see the daylight color in my corridor ,, all assembly has the same color ,, what can I do to see them , Thanks a lot for video (Y)

  • @amkolo482
    @amkolo482 4 ปีที่แล้ว

    Good tutorial, sir. Can you design an irrigation planning network? The sub-expert uses u-ditch. Thank you sir.

  • @bradenavant2812
    @bradenavant2812 5 ปีที่แล้ว +2

    Jeff, Can you share the pkt file in some other way? The download link isn't working. Thanks!!

    • @JeffBartelsCAD
      @JeffBartelsCAD  5 ปีที่แล้ว +1

      Download should be working now. Try it again when you get a chance.

    • @jacquesvanderwesthuizen8723
      @jacquesvanderwesthuizen8723 5 ปีที่แล้ว

      @@JeffBartelsCAD I just saw this video. great stuff. Would you be so kind to open the link again to download the *.pkt file,because it have reached the 30 day limit and is not available anymore. thank you

  • @namendozaa
    @namendozaa 5 ปีที่แล้ว +2

    Dear Jeff can you please share the pkt file again, the download link isn't working. Thank you in advanced.

    • @JeffBartelsCAD
      @JeffBartelsCAD  5 ปีที่แล้ว +1

      The link should work now

    • @namendozaa
      @namendozaa 5 ปีที่แล้ว

      @@JeffBartelsCAD Thank you so mucho!

  • @redouanebendalihassine9651
    @redouanebendalihassine9651 7 ปีที่แล้ว

    thank you so much you are the master thx again

  • @brayamacuna4675
    @brayamacuna4675 ปีที่แล้ว

    Hi, i have a problem with they daylight

  • @davecajun3893
    @davecajun3893 9 ปีที่แล้ว

    Hi Jeff, Very nice work! How can I contact you. I am looking for help with a small cad project.Thanks.... Dave from Boston.

  • @funky124j
    @funky124j 7 ปีที่แล้ว

    Jeff, Cound you please share the pkt files?The link in Video's description is not working....I'm a Civil Engineer and use Civil 3D in highway design.I have problems in transition part modeling. It's a very good solution !! Thanks you very much.

    • @JeffBartelsCAD
      @JeffBartelsCAD  7 ปีที่แล้ว

      I'm afraid the service that hosts the link is down for maintenance. I've been told it should be back up at 9:00 pm PST.

    • @JeffBartelsCAD
      @JeffBartelsCAD  7 ปีที่แล้ว

      I'm afraid the service that hosts the link is down for maintenance. I've been told it should be back up at 9:00 pm PST.

    • @funky124j
      @funky124j 7 ปีที่แล้ว

      Dear Jeff.....Thank you very very much !! you save my project!!

    • @timjoiewall4303
      @timjoiewall4303 7 ปีที่แล้ว

      I was able to download the .pkt from the webpage link. Click the link, then select the Download icon in the top right corner to get the .pkt file.

  • @genedaguerre1472
    @genedaguerre1472 4 ปีที่แล้ว

    Jeff: Can you provide the download link for PKT file again? I'm having trouble finding it. Could you also provide the location for your TIP JAR as well?

    • @JeffBartelsCAD
      @JeffBartelsCAD  4 ปีที่แล้ว

      Hi Gene, Just to confirm, are you clicking the download link in the video description? If I click the link, it is working on my end. Is the link not working for you?

  • @ErikHenrick
    @ErikHenrick 8 ปีที่แล้ว

    Is there a site with more downloads for custom assemblies?

  • @dougfinlay7531
    @dougfinlay7531 6 ปีที่แล้ว

    It would be better to have this transition ability built into civil 3d just like 12d model, its competitor, has it built in using modifiers.

  • @SkeleTele
    @SkeleTele 9 ปีที่แล้ว

    you have the best tutorials! do you have a full series?

    • @JeffBartelsCAD
      @JeffBartelsCAD  9 ปีที่แล้ว +1

      +Paul Ceglia Hi Paul, thank you for the kind words. If you are interested, I have recorded a full Civil 3D training series for lynda.com. You can find it here... www.lynda.com/jeffbartels

    • @SkeleTele
      @SkeleTele 9 ปีที่แล้ว

      Yes, thank you

    • @hanyfarag6811
      @hanyfarag6811 7 ปีที่แล้ว

      plz send another link for the file,1st one does not work

  • @tsa7835
    @tsa7835 4 ปีที่แล้ว

    Jeff,
    I tried to load this subassembly and was warned that the site may have malicious material is the subassembly still safe to download

    • @JeffBartelsCAD
      @JeffBartelsCAD  4 ปีที่แล้ว

      I am not seeing a warning when clicking the link. I'd recommend using a different browser to see if that makes a difference for you. Hope this helps!

  • @nizamuddinthonichal3931
    @nizamuddinthonichal3931 8 ปีที่แล้ว

    Hi sir, are you giving customized topics, online training.

  • @hanyfarag6811
    @hanyfarag6811 7 ปีที่แล้ว

    plz send another link for the file,1st one does not work

  • @aqeelahmed5245
    @aqeelahmed5245 6 ปีที่แล้ว

    nice

  • @noufaranalakath8627
    @noufaranalakath8627 7 ปีที่แล้ว

    Jeff , could you please share the slope varies pkt files, actually i am working with breakwaters in Civil 3d , I can use this transition part, thanks for your videos , thats help me a lot 👍👍👍

    • @JeffBartelsCAD
      @JeffBartelsCAD  7 ปีที่แล้ว +1

      You'll find a link to download the .pkt file in the video's description.

    • @noufaranalakath8627
      @noufaranalakath8627 7 ปีที่แล้ว

      Jeff Bartels thank you very much, i will check

    • @noufaranalakath8627
      @noufaranalakath8627 7 ปีที่แล้ว

      Jeff Bartels got it👍

  • @terenceofoi2190
    @terenceofoi2190 4 ปีที่แล้ว

    is this also metric??

  • @sreejithcm
    @sreejithcm 6 ปีที่แล้ว

    Thank u sir

    • @JeffBartelsCAD
      @JeffBartelsCAD  6 ปีที่แล้ว +1

      I'm glad you found it helpful!

    • @sreejithcm
      @sreejithcm 6 ปีที่แล้ว

      Sir iwant cooridor cross section label style setting tutorial. Pls help

    • @clarmanpacuma339
      @clarmanpacuma339 6 ปีที่แล้ว

      +Jeff Bartels Dear sir can you help me with rock berm design with multiple layer design on top of it and how to compute material per later..i.e breakwater cross section and rock berm design section. thank you very much

  • @mre9159
    @mre9159 4 ปีที่แล้ว

    HOW TO MAKE A DAYLIGHT WITHOUT FOLLOWING THE SLOPE OF A DESIGN ROAD

  • @habibrahim7438
    @habibrahim7438 6 ปีที่แล้ว

    poor video

  • @MrJerney12
    @MrJerney12 5 ปีที่แล้ว +1

    Jeff, Can you share the pkt file in some other way? The download link is not working for me as well. Thanks!!

    • @JeffBartelsCAD
      @JeffBartelsCAD  5 ปีที่แล้ว

      Should be working now. Grab it as soon as you can.

    • @MrJerney12
      @MrJerney12 5 ปีที่แล้ว

      Excellent! Thank you