RC Hydroplane Racing Pit Tour - Ellensburg WA 6/30/19
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- RC Unlimiteds Rose Cup pit tour with a little heat racing action
Want to see more? Follow M5 Performance on Facebook at M5PerfHy...
amzn.to/3ZJogJP Total Boat Flotation Foam - Make sure you get the 2lb version (NOT 6lb) by clicking this link!
amzn.to/3XxuKK1 Starbond Flexible Medium CA is the only CA glue you will ever need and is available through my Amazon Affiliate link
amzn.to/3CW6DwJ 48 Inch Aluminum Straightedge - Gotta have it!
amzn.to/3iD3ZVK G/Flex Epoxy - This is the one you want for the majority of the assembly. Getcha some!
amzn.to/3XtMlSU Dremel wood cutting wheel as seen in my videos. You need this!
amzn.to/3QAtfIy Get this Dremel mandrel for mounting the cutting wheel.
amzn.to/3vXd7Yc Digital angle gauge. We'll be using this a LOT during the build. Get it now so you'll be ready.
amzn.to/3kbMdcq THE BEST epoxy application brushes - no stray hairs! Luv em!
As an Amazon Associate I earn from qualifying purchases - But the good news is there is no additional cost to you, only great products!
Any comments on a vintage prather pirahna out rigger 11cc inboard. Just acquired it. Wish I had a manual. My first rc boat
I haven't run one, but anything called Piranha has to be fun!
For electrics, some of those arent very fast.
But some are!
Bill Brandt is awesome and helped me tremendously! Responded to my email fast and so completely. He’s helping me get started with running gear and such. Kudos to Scott Meyers for sparking the dormant builder in me with his videos!! (Built my first boat allot of years ago!!!)
I'm gonna need to see pics of your build John!
@@M5PerfHydros - you got it! I’ll remember to do that once I get building man!
❤❤❤❤
Watching some of the races would be great. Too much pit bid.
Thanks for the input, I'll see what I can do about that!
Great footage! Thanks much Scott 👍
Great Vid! Those boats look super sweet 😎😎😎😎
u-40 on 15:31 nailt it !! gorgeous
Love the pit tours. Keep em coming
Awesome boats !! I like the the yellow-pink boat ✌️😊
Thanks! Hope we get to race them this year!
At 9:20 What is the same of this boat you sell? Thanks.
This the The Edge
The boat in the thumbnail (yellow edge) is that a kit you sell ? Is it nitro or gas ? Can I buy one ?
Hi James,
This boat is nitro and was based on a frame kit from MLBoatworks. I made wholesale changes to the bottom of the boat to suit my liking, but the basic kit is quite excellent.
If you'll scroll down through my Facebook page you'll find quite a bit of information about the build. You can find me here;
facebook.com/M5-Performance-Hydroplanes-237635276373511/
The best place I know of to buy wood kits is MLBoatworks;
mlboatworksrc.com/
Many good fiberglass boats and cowlings are also available from RC Boat Company;
rcboatcompany.com/
Between these two you should be able to find almost anything you'd want!
I really enjoy these videos, so thank you sir!
Thanks!
Boys don't get older their toys just get more expensive
Kachinnnggggg!
So cool! Do you know where I can buy this type of boat?
Yup!
If you're just looking for plans so you can scratch build your own boat, Newton Marine has a huge selection here;
www.newtonmarine.com/
The best place I know of to buy wood kits is MLBoatworks;
mlboatworksrc.com/
Many good fiberglass boats and cowlings are also available from RC Boat Company;
rcboatcompany.com/
Between these three you should be able to find almost anything you'd want!
I love those boats.... I love this channel.... Thanks a lot Mr. Meyers
You're welcome, thanks for watchin'!
new to the game thanks for the videos
Welcome aboard Gene, glad you enjoy the videos!
Amazing
Thanks so much!
Thank you for doing this.
My pleasure!
What percentage of nitro are you using...back in the 90's I ran 70% in my picco 67 scratch built out rigger hydro fun days
I don't know of anyone using 70% in .67 scale these days. I've used 60 or 65% the past few years, though to be completely honest I can't tell any difference between them. Thanks for watchin'!
Pretty sure he meant his picco 67 Engine not the boats scale.
are there any rc boat builders that dont charge above $3-400 per hydro
Nope, I don't think so. These things are costly and take a mighty long time to build.... if you want them built well.
Can you tell me how to get started in RC hydroplanes ? Also how much it costs? I live in Madison Indiana.
Michael - The best way to get involved is to get involved! I don't know the area where you live but I'm certain there are races nearby. Do some searching online, find events and races, and GO! Get to know the racers in your area, ask questions, help at the race sites, and before you know it you'll have a radio in your hands. As to the cost.... well.... like most hobbies it can be very expensive or very affordable depending upon how far you want to push it. In my area a guy can race 1/10th scale electric hydroplanes for next to nothing, or 1/8th scale nitro burning monsters for a small fortune, but either way you won't regret it. Get out there... meet the racers... get a boat... let's race!
Hi Michael propwalkers rc club in Madison. they're "the" hydro club in the area. Also in cincinatti, the cincinatti model boat club.
U dont show the boats raceing why
Check out my other videos Greg! Here's a few to get you started; th-cam.com/play/PLN1BConcF3a1QQ5gIm5PYEj9HFK_fnNnl.html
What holds the cover down?
The cowling? There are several methods used, but on my builds I use magnets. One of my videos shows exactly how I do that; th-cam.com/video/zHh2a9fsgAo/w-d-xo.html