What is wrong and how to fix the lego technic ducati panigale v4
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- This is the Lego technic ducati panigale v4r.
code 42107
It costs about 60$ and it took me about 2 hours to build it.
There are some problems with this products
At first the chain is too long even on the display picture at the box. you have to remove a chain link to be as it should be.
The second error is that at 1st gear the pistons should move slower than when you put the second gear.
this cannot be fixed.
@LEGO
where was the part helping me to fix it?
Remove 2 chain links to fix it
just the chain apparently...
drive.google.com/file/d/10DYiK_JaRwkdQe3gsZlx-4-TxdyVF2kH/view?usp=drivesdk
My gearbox does not move and I don’t know what’s wrong. I’m halfway though where the guide says to check and I don’t see the issue. Only the outside gears on the right side move
Is the rubber o ring at the correct place . Does any of the pistons moving ?
I assembled this bike today. I also noticed that there is too much slack in the chain. but I left it at that. I also had a problem with the cylinders moving in neutral. It was necessary to turn the orange wheel inside by 90°. You have to assemble exactly according to the instructions and everything works fine :) Done in 5 hours 😅
Very good congratulations. Even now you can remove one chain link and it will be pefect
MY V4 DOESNT EVEN MOVE!!! In every gear wtf is this bullshit
drive.google.com/file/d/10DYiK_JaRwkdQe3gsZlx-4-TxdyVF2kH/view?usp=drivesdk check this picture
How do I fix the cracking noise??
Hi! Thanks for your comment, cracking noise from which part ? Probably you bought the real ducati that always make a cracking noise 🤣
My gears dont spin and stiff any advise? I already added a tiny bit of oil
Hi! Thanks for your comment. For sure you shouldn't put oil. Maybe you need to re fit the rubbers of the engine . Are the pistons still moving?
what to do if everything spins in neutral, but not in first and second?
You have to put the rubber belt in another position
@@ioannidesalex Ahhh... Sorry but which position?😅
Tomorrow I will go home and I will show you
@@ioannidesalex THANKS 🙏🙏🙏
drive.google.com/file/d/10DYiK_JaRwkdQe3gsZlx-4-TxdyVF2kH/view?usp=drivesdk
3 minutes to take 2 parts of chain? Thats the upgrade? Omg
Sorry for that
Damn can anyone help.When i put it in netural it doesnt work (ofc) And it works in second gear as Well but it doesnt work in first for some reasoj
Are the both of your rubber belts at the position?
@@ioannidesalex yeah they are :(
I have to think better then . Send me a picture of the gearbox
@@ioannidesalex do u have insta or something?
Useless
my shifter hits the chain when i tried to put it in gear 2?
nvm, my shifter was put on facing gear 1 instead of N
Did you reinstall it at correct position?
I did now ty
Will the chain snap? I notice this as its at big tension
Nooo it is working great. I played a lot with this bike
You didn't fix it
I did fix the loose chain.