In this one we are just going to look over the car and prepare it the best we can for inspection. Hopefully it will pass the MOT! Music: / nothing-lasts
Enjoyed your videos. I hope you do a full Volvo restoration because I like Volvo very much, unfortunately it is an expensive car and spare parts are difficult to get and expensive in my country.
Nice to see your Volvo 740 GL project! I had to get my Volvo roadworthy so I could transfer my name to my Volvo 740 to pay the car registration cheaper. My project is pretty slow but it's in Volvo OZ. It's VOLVER PESTANYA - VOLVO 740 GL 1989 PROJECT. :)
Thank you! Thanks for checking my channel out :) Just looked up your car project on the forum. Looks really nice! You don't get to experience the "joy" of working on rusty undercarriages that has been through 30 salty winters hehe 😝
@@ejoautovideos there are few rust chips but 1989 with zinc coating, no sign of major rust around the car. :) Looking forward to see the paint work and I'm surprised you have bought a manual transmission gear! 👍
thank you for rescuing this old car. I have a 1988 740, still like driving my "baby". we have undercoating to prevent rusting, it was applied when the car is new. would cleaning out those rust and reapply undercoating help prevent more rusting ?
Correct, if the undercoat has been compromised and moisture is trapped underneath resulting in rust forming, it is a good idea to clean that area of old undercoat and loose rust and then reapplying a good quality undercoat. Thank you for watching, have a good day! :)
4 ปีที่แล้ว
lol. "we have undercoating" yes. we have it aswell here in norway and sweden. it doesnt work like that. its not a 1 time job. lol. from 1988 to 2019 it may need 10-15 undercoats
I like to watch your videos in TV with my father. I know that is too expensive but I think you must be more careful with the brake system, for example clean the cilinder, for it move better. Brakes are really important investment!
@@loganx77 denna använder jag: www.autoexperten.se/bilvard/kemikalier-och-vatskor/serviceprodukter/keramikpasta-m-pensel-200ml/ Precis som du använder jag även silikonfett till glidpinnarna. Kopparpasta till beläggen och oket funkar bra det med ;)
Check out l-m-r.se It's a swedish site, but they ship internationally (might be restrictions due to Corona). Just click on the language button in the top left corner when opening the site to view in english. 👍
It's a 3 ton scirror lift that can lift 1m (about 3 feet). I bought it from a Swedish company called verktygsboden.se but it's just a generic cheap chinese lift, that you probably can find elsewhere. 👍
Ooh this chap's a proper engineer... If I'd done it there would have been a car fire ending episode one (and the series) in 4 minutes. I'm jealous.
Thank you very much for your comment. 😊
Devouring this series. Maybe it will give me motivation to do my 740 wagon restoration..lol.
Happy to hear that! :)
Yes do it, the hard part it always to get going.
My new favorite Volvo channel! I have a 1992 240 with 43K miles. My baby!
Thank you so much :)
Love 240's, lovely cars!
Really enjoyed watching this series so far. Can’t wait for the next instalment.
Thank you 😊
Enjoyed your videos. I hope you do a full Volvo restoration because I like Volvo very much, unfortunately it is an expensive car and spare parts are difficult to get and expensive in my country.
I'm watching from California. Keep up the good work. I have subscribed.
Thank you so much 😊
Nice to see your Volvo 740 GL project! I had to get my Volvo roadworthy so I could transfer my name to my Volvo 740 to pay the car registration cheaper. My project is pretty slow but it's in Volvo OZ. It's VOLVER PESTANYA - VOLVO 740 GL 1989 PROJECT. :)
Thank you! Thanks for checking my channel out :)
Just looked up your car project on the forum. Looks really nice! You don't get to experience the "joy" of working on rusty undercarriages that has been through 30 salty winters hehe 😝
@@ejoautovideos there are few rust chips but 1989 with zinc coating, no sign of major rust around the car. :) Looking forward to see the paint work and I'm surprised you have bought a manual transmission gear! 👍
Bra video 😁
Tackartackar! 😁
Quite good brake fluid for that car :)
Hehe yeah i know, i'd just opened that bottle for another car, so I didn't want it to go to waste.
Nice project and you stole this for 50$, regards from Finland
Thank you! I know, it was a bargain!
thank you for rescuing this old car. I have a 1988 740, still like driving my "baby". we have undercoating to prevent rusting, it was applied when the car is new. would cleaning out those rust and reapply undercoating help prevent more rusting ?
Correct, if the undercoat has been compromised and moisture is trapped underneath resulting in rust forming, it is a good idea to clean that area of old undercoat and loose rust and then reapplying a good quality undercoat.
Thank you for watching, have a good day! :)
lol. "we have undercoating" yes. we have it aswell here in norway and sweden. it doesnt work like that. its not a 1 time job. lol. from 1988 to 2019 it may need 10-15 undercoats
Kul projekt, tar en tillbaka till 740-tiden 👍
Härligt! Vad hade du för 740? 😊
@@ejoautovideos en kalsongblå 745 -86. Strax efter millenieskiftet bör det ha varit 😁
Trevligt klipp!
Tack! :)
Bra kanal och kul projekt. Ska följas :)
Härligt! Tack så mycket! :)
Scandinavian gang ↙️
like from syria same my car
Where can I get the handbrake repair kit? Thanks
I love 740. 👍 great job
Thank you very much! 😊
Are you from sweden? Very interesting content thx lot, we are working on 240 and 740
Thank you 😊
Yes, I'm from Sweden 👍
You say biltema subtitles say. Beat them up
I like to watch your videos in TV with my father. I know that is too expensive but I think you must be more careful with the brake system, for example clean the cilinder, for it move better. Brakes are really important investment!
Glad you like my videos, make sure to watch the later episodes where I replace more brake components. 👍
Kul projekt och bra filmer överlag! Kan du inte göra en film om hur man gör rent olika säten och testar medel för detta?
Tack så jättemycket, uppskattar det! :)
Absolut skulle man kunna fixa det i framtiden!
Hey, what is the model and brand of your car lift? I like it and like to look more into it.
what brand lift are you using bro? that thing is perfect
From a Swedish brand called Pela.
But honestly I think it is just a generic chinese scissor lift that they put their brand on.
They don’t check that kinda stuff on inspection here.
Must be nice, where do you live? :)
EJO Auto Videos I am in Texas. It is nice on the budget, but means lots of dangerous cars on the road 😮
did the calipers move on the sliders ?
in norway that car would cost like 2800 dollars
Thats crazy! 😝
Same they are getting rare here people destroy them for fun
Pretty expensive in Finland too. Good specimens easily 1500-2000€. Turbo models even 4000+.
Prices are really getting up on these.
@@formatique_arschloch right now a 13000 dollar volvo 740 is for sale..
Mackans garage :D
Riktigt rolig kanal. Har kollat några videos. Vad använder du för fett runt klossarna och bromsoket?
Tack så mycket, uppskattar det! :)
Där använder jag ett keramiskt fett (ingen risk för galvaniska strömmar) samt tål mycket höga temperaturer.
@@ejoautovideos Får man fråga vilket fett? Jag kör med kopparpasta där och silikonfett för glidpinnarna.
@@loganx77 denna använder jag:
www.autoexperten.se/bilvard/kemikalier-och-vatskor/serviceprodukter/keramikpasta-m-pensel-200ml/
Precis som du använder jag även silikonfett till glidpinnarna.
Kopparpasta till beläggen och oket funkar bra det med ;)
Bilprovningen sedan Dekra på pappret:)
Vart hittade du en Volvo 740 för 500:- ?
Uppsala :)
Where u get parts from do you order? I’m getting a 740 turbo 1988
Check out l-m-r.se
It's a swedish site, but they ship internationally (might be restrictions due to Corona). Just click on the language button in the top left corner when opening the site to view in english. 👍
EJO Auto Videos Thanks so much!Have a safe quarantine,Regards from Alberta
@@harlton thank you, same to you 😊
What kind of lift is this ?
It's a 3 ton scirror lift that can lift 1m (about 3 feet). I bought it from a Swedish company called verktygsboden.se but it's just a generic cheap chinese lift, that you probably can find elsewhere. 👍
Äru svensk?😊
Nei
är su svensk
Yes 😊
سؤال من فضلك عندي الفايسن كير يفلت غير منتظم هل يصلح أن أستخدم السيارة بدونه