I no longer buy plastic clamps, but I make them myself in 3 minutes
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2023
- Friends, my name is Paul! I am the author of the channel Performer of ideas.
On this channel, I present everything I've done with my hands.
Creative ideas, useful tips!
#DIY #Homemade #Craft
I have a bag of 100 zip ties I bought 20 years ago. It is still half full. 20 years from now, when I run out, I will come back to this video, thanks. Bookmarked!
If you remember 20 years from now, where they even are, soak them in water for 24 hours to make them less brittle before using.
I have a bag from 20 years ago still half full. When I run out in 20 years I will go to the store and buy more!
Best comment of the day!
@@hifinswordMe to.
I buy the ones that you can reuse over and over. A little button on it and it opens
By the time you did all of that I was able to drive to the Home Depot and pick up a bag of 1,000 of them all assorted colors and sizes for tree fiddy, then I went to Sonics to get a milk shake. Then I got home and connected all 1000 of them into one big ass giant ring around my house to make it stronger in case of hurricanes. Then I took a nap.. woke up to catch the last 30 seconds of this video.
😂🤣🌟🙋
Talk about walking around the block to get across the street! Harbor Freight has cable ties so cheap why would anyone bother to do this?
But why do it the easy way when you can make a convoluted process out of it?🤪
Not to mention...you paid a nickel for your bottles, once redeemed you can purchase a package of cable ties. All comments on this video are negative. The project itself a waste of time. On another note...the fabulous job of producing the video compounds the waste of time. I could find better things to during my retirement years!!
😂
Ojalá si un día me raptan, mis captores usen estos presintos😅😅😅
Hay una gran diferencia entre la capacidad de amarre, resistrencia y durabilidad entre las tiras de plástico de las botellas y las tiras tradiciionas que cuentan con un sector de estrias que permite fijacón de amarre que no tienen las tiras plásticas obtenidas de las botellas. No se ve muy claro como un dobladillo del plastico de botellas pueda sojetar la tiras sin zafarse. Es de apreciar si el talento del inventor de tratar de ahorrar dinero con niuevas ideas. Gracias
In our childhood, we were making this with coconut tree leaves as toy watch
Asombroso y muy ingenioso,arriba el reciclage
good tips for life
Muy criativo. Perfectamente aplicable. Lo único que no se entiende bien es el nudo que sujeta la abrazadera
Sale mas cara tu idea por falta de herramienta mejor las compro
Very clever! Thank you.
I like that. between the tools (including a bandsaw and a heatgun) and the labour involved for making one of those straps, it would save me the 2 bucks I pay for a pack of 50. Not to mention it will deprive me of the pleasure of fiddling with each tie, especially if I have to use a bundle of them. In places where I don't have an outlet for the heatgun.
Seriously, I appreciate the creativity, but that is one stupid way to get tiewraps.
Got a lifetime supply of real ones for $10, 0 minutes . . .
😂
I don't know why I get sucked into watching these videos.
Me neither!
Me too, especially when I'm still awake at silly o'clock clock in the morning
Te dan una perspectiva, alguna idea....tal vez no sean prácticos pero puede ocurrirsete algo....
yea what ☝🏻said
He saves on plastic ties, by using 1000 dollar in tools.
Increíble, buena idea👍
So much time and effort to make something that's very cheap.
Great job recycling / repurposing 👍👍👍
Stay well, Joe Z
Mi tiempo y mi trabajo VALE MÁS que lo que pueda ahorrarme.
coincido, es un poco engorroso, más bien como sujeción temporal si se te acaban los precintos y necesitas terminar algo.
SUPER COOL BRO
Looks like a real time saver
Budget saver and repurposing bottles which would immediately end in landfill.
😂😂😂
@@ruthejimenez
Or get recycled
@@ruthejimenez 😘
Todo ese trabajo, herramientas y materiales, tiempo, para hacer abrazaderas, que no cuestan nada
Qué ingenioso, gracias.
wonderful idea!! Thanks!
clever but impractical, the material, thickness and locking mechanisms of commercial zip ties beats what you have made here, even if they do cost. Your time has a cost too so don't forget that.
Popppp😊😊😊😊😊😊😊😊
Top job. Congratulations from belgium 🇧🇪
Excelente video !. Creo que lo más rescatable sin embargo, es la herramienta que fabricaste para cortar las botellas en tiras, ya que estas tiras de plástico PET también se pueden transformar en *filamento para impresoras 3D* lo cual es mucho más rentable de fabricar que las abrazaderas plásticas, puesto que el filamento para impresoras 3D tiene una alta demanda hoy en dia.
Pasé tu video 2 veces en cámara lenta, pero aun asi no comprendí totalmente como se hace el "nudo" que es la parte vital para que la amarra plástica tenga una buena tensión de amarre y resista sin soltarse; que es el propósito de las amarras !.
Posiblemente faltó una muestra más detallada de esta *parte vital* de tu video.
Muchas gracias y saludos cordiales, Juan.
El doblez que hace del "nudo" luego lo ahorca con la primera "amarrada", de hecho incluso muestra muy bien de que lado debe hacerse para que quede bien trabado el "nudo" y le corta con la tijera el sobrante. Está muy claro, vealo de nuevo tal vez en camara lenta.
@Jhony1392 Pudiste finalmente hacer "el nudo". Yo también lo tuve que poner en cámara lenta y descubrí que es muy importante que la parte que se recorta permita que luego de doblar la tira se pueda enredar en ella misma.
A video of a solution for a problem that is grossly inferior to the very cheap alternative that already exists.
Te felicito eso es ingenio!!!
gonna do it, thank you for sharing
Excelente trabajo. gracias por compartir tus ideas y conocimientos. 😊👏👍
Genial felicitaciones su creatividad es hermosa , saludos.
Muchas gracias. Me ha sido muy útil ya que en mi trabajo utilizo más de 100, de distintas medidas, a la semana. 👍👍👍
Jajaja
Lo malo es el tiempo que se gasta en hacerlo , pues a veces vale más el tiempo que el ahorro, y el plástico con el calor se deforma y se quema
Gracias por compartir
Espetacular maestro quien como tus grasias
Muy buen ingenio. Lo aplicaremos en casa pero no se ve bien como se sujetan las puntas.😢
El cierra la abrazadera una vez sin nada adentro y asi se queda el enrollado atrapado, coloca el video en la menor velocidad 0.25 en configuracion y se observa perfectamente el proceso.
Bello bravo
Fantastic idea!
Sáng tạo quá bạn
Interesante e ingenioso trabajo pero se me hace más fácil comprarlas hechas.
- geniale Idee - "kostengünstig" außerdem 👍👍👍
Parece una buena idea y lo mejor que es recuclando, habra que probarla
ESPERABA EL MOMENTO DEL AJUSTE QUE ES LO MAS IMPORTANTE PERO LA VERDAD NO AJUSTA COMO UNA ORIGINAL SE PUEDE VER A SIMPLE VISTA POR ESO TIENES QUE UTILIZAR CALOR PARA QUE AJUSTE MAS ME QUEDO CON LAS ORIGINALES
Invento y orgullo hondureño 💪
Una boludez.
muy interesante
جميل جدا ومفيد .شكرا على المعلومات القيمة
No entendí bien como se hace el amarre en uno de los extremos. Gracias. Salud y alegría.
excelente
great idea thanks
Yo utilizo unos 200 o 250 todas las semanas,pero me parece que seguiré comprándolos en Home Depot.
Très bonne idée .
Ingenious what a simple super Idea .
lo de la pistola de calor debe ser opcional porque muchos no la tenemos
@@antonioacevedodiaz5910 Con un fosforo o encendedor creo que se soluciona
Good to know that it is possible. Otherwise it's a solution looking for a problem.
Me tendrías que agradecer por ver el video, pero para hacer lo que haces, me voy a comprar abrazaderas en la ferretería y me gano en tiempo y trabajo....
Nashik, Maharashtra, India
Informative VDO 👍 excellent 🙏
Muy pero muy buen video
Bien fait
I hear you. There is so much we can make ourselves. My Doctor told me I needed a
pacemaker & ut was going to cost $140,000.00 and about the same for the surgery.
I told him, Oh, hell no & went home & built my own out of spare electronic parts I had
lying around. I had my neighbor come over and installed it in my chest in my garage.
Total cost? $5.00.
!
LOL.
That makes more sense than making your own zip ties that you can buy at the dollar store.
Just like Ironman 1 !
Brilliant 👍🤣🤣🤣🤣🤣
Spare electronic parts - 35 cents. New lease on life from DIY pacemaker - Priceless!
Awesome hack
tuyệt vời quá
Esta bien
you saved our planet, man 😎
También puede utilizar las tiras para hacer bolsas reutilizables.
Excelente idea, lo que no se entiende bien es cómo se hace la parte que sujeta la cinta.
Prefeiero comprarlas hechas a estar haciéndolas con esa cantidad de materiales que se requieren, por mera razón práctica
No me quedó claro como hizo el nudo😢
Just go buy em.
Que patente la idea y que compita con las originales pues se nota que tiene tiempo para cortar doblar hacer al nudito etc...
It is a good idea, and creative, and recycles plastic. But there is also "cost-benefits" of time. Sometimes, we get ripped off by others, so DIY. But sometimes, something cheap and bought for $2, then the mass-produced makes sense.
sí, puede ser..puede ser.. No para trabajos profesionales, donde se requiere una sujeción que cumpla ciertas normas. Para trabajos caseros puede ser útil si es que usas muchos precintos. Es una buena solución de emergencia. Soy muy partidario del reciclaje de plásticos, apruebo.
Merci
Easier to buy a zip tie!😊 5:17
Yes just buy them
This is crazy. Who has time for this? Zip ties are cheap.
NIce way to repurpose some plastic bottles.
And a nice, simple tool to do it.
But a critique:
Why the digital measurement of a random block of wood? almost any handy size will do.
Why did you cut slots in the wood using a hacksaw equiped with a metal cutting blade?
To use those somewhere remote, such as up a ladder, or on the side of the house or on the boat; now I would have to carry a heat gun?.
What if I am tying down something which is, itself sensitive to heat?
Plus carying a few random zip-ties in my kit is simple and neat, not all coiled up and tangled together.
Regardless, I think I'll make one & see what other uses I can find for old bottles.
Y como hace el orificio para que en otro extremo quede firme?No está nada claro.
Mas gostoso hacerlos requiere herramientas muy costosas
Brillante!! Desperdució 1hr de su tiempo de trabajo y familia, invirtió en 3 herramientas de 30 dólares cada una para hacer 50 abrazaderas por dia. Cada abrazadera suya cuesta aprox 5 dólares. 100 abrazaderas en Home Depot cuestan 10 dólares. Es notable la incapacidad de razonar que tenemos los humanos. 🤦♂️🤦♂️🙏🙄
"How to get on DO NOT RECOMMEND" Now thats a better title for this vid
I'll rather buy plastic clamps to spare me of preparing the needed materials to construct one. But a good try for everyone to make their own.
La haré sin dudarlo aunque no entendí como se hace el enganche puesto que no usaste pegamento ni nada solo doblar gracias
Muy bueno me mato el uso del calibre
i wish when he made the “Secure” section he would slow down the procedure. Apart from that what a great clip
Hace falta si o si calentarlo para que quede bien ajustado o queda apretado sin darle calor?
Tengo un amigo policía que usa abrazaderas plásticas para detener y arrestar y quizá le sirve ese método.
This is such a fantastic idea! You would think a whole industry would spring out of this that could recycle so much. Great job! I just made a test one out of some plastic and it is a very secure strap. I cheated and used scissors, but your idea seems great for mass production!
I'm all in favor of resourceful recycling. I re-use empty cat litter jugs for mini-trashcans and for portable urinals. For these straps, however, this is too much work for the cost benefit. Straps are super cheap at Harbor Freight.
I like!!!!😮😊 4:04
👍❤️
That's great if you can not purchase a pack of plastic clamps. But they are fairly cheap and available. Give us something that is expensive to buy but cheap to make.
Like air conditioner or refrigerator? lol
I wish!
Appreciate the video for its creativity and innovation.
Days of inexpensive zip-ties are behind us.
No en todos lados suelen ser baratos, o no se encuentran disponibles....Es una idea que puede ayudar en algún momento 👍
♥
Te felicito por tu idea .....!!
Son cosas muy baratas de comprar, pero en un apuro, no siempre tienes a mano, donde conseguir esas cosas tan baratas, con el dinerito.......
Mejor el ingenio sin dinero
Que es dinero sin un " Wall Mart "
How well does it work with out a heat gun??
👍👍👍
Sale mucho más barato y rápido comprar un paquete de bridas
At 4:00 it's hard to see how you make the fastener of the clamp tie thing. I like the blade stripper device.
Mas es el tramite mejor las compro
Considering the low cost of manufactured cable ties making them this way seems ludicrous
Sadly we live in an affluent age and prefer littering rathwr than recycling..so this fellow gets my vote for inovation..i recycle a lot of high tech waste material in Alternative Construction Techniques ..!!
Bernard B Arch. M Phil. PhD ( B'ld Sci.)
Your missing the point.would much sooner be stuck on a desert island with him and his initiative than you
@@TheTimutube Yeah. All you would need is an electric drill and heat gun not to mention a source of plastic bottles, which, honestly would be better used for collecting drinking water.
Seriously. I could waste half a day making them myself or just go to Harbor Freight and get a package of them that I'll likely never us up for $0.99
@@RockDog101 you're welcome my friend...!!
If you're stuck out in the Bush or the way " out-back etc., you bloody soon learn to use whatever you have as either a reciprocal , a improvised tie or a void former as opposed to littering the Environment around you..i.e., if you go fishing in a.o., in Mozambique the locals will beg you for your Old Plastic water containers, & would offer you a weeks tending to your Camp in exchange. They even re-crush the Conc., from Buildings destroyed during the Bushwar for building material..desperate times call for desperate measures..no E- Bay or Harbour Freight around my friend and keeping the natural enviroment pristine is their first priority...!!!
Mejor reciclar en lugares especializados
Ahorra tiempo y compra las abrazaderas en las tiendas de dólar plus
❤️🔥
Però devi fare vedere bene come fai il nodo ciao grazie
EN LO QUE COMPRO LA HERRAMIENTA ME GSTO MAS DE UNA CAJA EN ABRAZADERAS DE TODOS TAMAÑOS
NO PIERDO TIEMPO Y ES MUCHO MAS PRACTICO IRLAS A COMPRAR
🤩🤩
En cuánto me salen todas las herramientas que necesito para poder reciclar una botella de plástico porque no las tengo? Buena idea pero sólo para los que disponen de todos los implementos que se necesitan.
Sale más económico comprar bridas. Al menos ahorramos tiempo.
Buen invento, pero los amarres plásticos son muy baratos, no cuestan mucho, prefiero comprar un paquete de 50 o 100 y ya, gracias por su información.
Buen vídeo amigo lo felicitó.
Que lástima que le de miedo hablar así se entendería mejor su proyecto.