Smart Plant Care with IoT Monitoring and Automated Water Pump using Blynk 2.0 - Method 2
ฝัง
- เผยแพร่เมื่อ 24 มี.ค. 2023
- Learn How to Create an IoT Monitored Smart Plant with Automated Water Pump using Blynk 2.0 App and Web Dashboard. Follow Step-by-Step Instructions in this Video.
Key Moments:
Will update soon.
For this project, we use following components -
• ESP32 Module/ NodeMCU ESP8266
• Ultrasonic sensor HC-SR04
• IR Sensor
• SG90 Servo Motor
• Connecting wires
• Small Dustbin
Important Links:
Code for NodeMCU ESP8266: github.com/itsbhupendrasingh/...
Code for ESP32 Board: github.com/itsbhupendrasingh/...
Circuit Diagram (NoeMCU ESP8266): github.com/itsbhupendrasingh/...
Circuit Diagram (ESP32): github.com/itsbhupendrasingh/...
Factory Reset your ESP32 Board: • ESP32 Troubleshooting:...
Factory Reset Your NodeMCU ESP8266 board: • NodeMCU ESP8266 Factor...
Blynk cloud server: blynk.cloud/
How to Calibrate the Soil Moisture Sensor: • A Complete Guide on Ca...
Link to download winzip: www.winzip.com/en/download/wi...
Link to download WinRAR: www.win-rar.com/download.html...
How to install ESP32 board in Arduino IDE: www.nuttyengineer.com/how-to-...
How to install NodeMCU ESP8266 board in Arduino IDE: www.nuttyengineer.com/nuttyfi...
Home Automation with new Blynk using BlynkEdgent Method: • Home Automation using ...
Arduino IDE Software: www.arduino.cc/en/software
NuttyFi Wifi Development board: www.nuttyengineer.com/product...
Find Our Other Videos on TH-cam: / @smedehradun
How Automation with New Blynk2.0 Latest method:
• Smart Home Automation ...
How to send DHT11 Sensor Data to Thingspeak server:
• Real-time Monitoring o...
How to Decode any RFID Card:
• How to Decode RFID Car...
Humidity & Temperature DHT11 with Raspberry Pi:
• Raspberry Pi with DHT1...
DHT11 Sensor with Raspberry pi using New Blynk2.0 IoT
• Humidity and Temperatu...
Multiple Servo Motor Control using New Blynk2.0
• Control Multiple Servo...
Gmail Alert & Notification with New Blynk2.0 IoT
• Gmail Notifications an...
ESP32 Factory Reset
• ESP32 Troubleshooting:...
NodeMCU ESP8266 Factory Reset
• NodeMCU ESP8266 Factor...
PH Sensor interfacing with New Blynk2.0
• PH Sensor interfacing ...
Distance measurement using Ultrasonic Sensor with New Blynk2.0
• Distance measurement u...
IoT Monitored Smart Plant with Water Pump Automation
• IoT Monitored Smart Pl...
Servo Motor Control using New Blynk2.0
• Servo Motor Control us...
Smart Dustbin with New Blynk2.0 IoT App
• Smart Dustbin with New...
TDS sensor based Safe Water Quality Meter with Mew Blynk2.0
• TDS sensor based Safe ...
DHT11 Sensor Data to New Blynk2.0
• DHT11 Sensor Data to N...
Home Automation using New Blynk 2.0
• Home Automation using ...
IoT Home Automation with Manual Switch Control Through New Blynk2.0 (Online & Offline Mode)
• IoT Home Automation wi...
LoRa Ra01 & Ra02 Interfacing with Customized Atmega328 Board
• How to Interface LoRa ...
LoRa Module Testing with Atmega328 Customized Board- SX1278 Long Range with Arduino Uno
• LoRa Module Testing wi...
LED Control with Arduino IoT Cloud
• How to Start with Ardu...
Contact link for Nutty Engineer Company: www.nuttyengineer.com/contact...
Contact link for SME: www.smedehradun.com/contact/
Join us at Social Platform: Github: github.com/itsbhupendrasingh
Twitter: / itsbhupendra
LinkedIn: / smedehradun
Facebook: / schematicslab
Instagram: / itsbhupendrasingh
#plantcare #automatedwatering #DIYproject #homeautomation #sustainability #gardening #environment #smarttechnology #innovativetechnology #greenliving #smartgardening #smartdevices #technologytrends #connecteddevices #smedehradun - วิทยาศาสตร์และเทคโนโลยี
Very Informative Video. Keep Up SME team!
Thanks Prabin
Thank you sir this is very informative and best video i am looking for...
Thank you. 🙏
12 v 2A adaptor ke place mai koi other components use kr skte hai hea
If you are using 12V relay then it is essential.
Is it possible to do multiple plant with 1 nodemcu?
Yes. You can.
The staus is showing offline even i am connected to the wifi network
Check the blynk credentials.
Sir can I use a 5v relay module on a 12v water pump for this project and will it work?
Yes you can. And it will work.
@@SMEDehradun why when I enter the blynk code, the humidity sensor suddenly only stays at 100% but if I don't use the blynk code, the sensor works on the serial monitor
Is your board connected to the blynk?
@@SMEDehradun yes connected only the pump works on blynk, the sensor does not move when connected to blynk but if you don't use the blynk coding the sensor works
I can't able to access github links please help me out!
hi it may be issue of github. link is working fine here. you can also find it in my github repository. link is available in the video description.
Sir board connection nhi ho rha please provide the video to board connection esp32
Process is same as shown in the video. You just need to provide your wifi name & password to connect to the internet.
Just ignore the special character in the wifi name and password.
Sir please provide th circuit diagram esp32 node mcu video
Circuit diagram link is available in the video description for both ESP32 & Esp8266.
@@SMEDehradun but I have no 12v and 2A adaptor so I can,t connecting the relay module to. esp32 node mcu 🙏
Can you make a vid using a simple switch in place of sensor? I'm trying to use esp8266-12E.
Can you tell me exactly your project so that I can help you?
@@SMEDehradun OK...I have a simple Float Switch, If water gets to high this switch closes. I have this programmed into a ESP8266 so that when the switch closes, it energizes a relay to make a Buzzing sound. But, I would like to have a virtual visual led to display Red when this switch closes. Very simple Circuit. I just don't know how to program IDE or Blynk to do this. I DO NOT want to control a LED, I want to see the LED turn RED on Blynk.
K. It’s very simple. I will send the program soon here.
@@SMEDehradun Thank you very much! I found alot of vids on controlling a led but no led indicator.
Sir please provide the esp32 node mcu video
Link is available in the video description for esp32 code and circuit diagram. Kindly check.
@@SMEDehradun thanku sir ❤️
Welcome 🙏
Nice video sir,, ❤
Sir Is it possible when we click button Or switch on it sends an alert message to the respective user using GSM module... Can u give me code for that.. Plzzz
Yes this is possible.
You need to add the at commands to send message through gsm. Take the help from below video link.
th-cam.com/video/6CG17D-TmQ8/w-d-xo.html
@@SMEDehradun yes sir at commands ok, but using switch or button on and off operation send alert msg
I think you can do it try it by yourself.
@@SMEDehradun yes I will try, but Is there any reference tutorial..
th-cam.com/video/SX0lyiJezgc/w-d-xo.html
This tutorial will help for “how to send sms through Arduino”
&
Below link will show you how to create button in new blynk
th-cam.com/video/SrkK5ANsDDM/w-d-xo.html
Sir program mai error aa rha
#include
It’s library issue. Include updated blynk library & select the proper ESP32 board.
Sir my water pump is not switching off even though it shows water pump is off in the blynk iot app.. Please suggest some answer
It's keeps turning on even though the moisture level is high
Use 1000mf electrolyte capacitor between vcc and gnd pin of the relays
Check your relay module is active high or low? Also Use 1000mf electrolyte capacitor between vcc and gnd pin of the relay.
@@SMEDehradun okay sir thank you
@@SMEDehradun sir it is uf or mf and can you tell about the voltage of the electrolyte
Hello,i have a trouvle here, i can't connect it to the blynk,but i can connect it to the wifi.... How can i fix this?
Do you have any contact? Ig or smthng?
Change the blynk credentials and wifi name and password & follow as the instruction as shown in the video.
@@SMEDehradun yes i do,but still can't connect to blynk
Check the wifi name & password . It must be simple without any special character
@@SMEDehradun it is simple,but still can't😅
blynk app is not working.......blynk app offline bta rha 🙏
Same
Then check the blynk credentials and your wifi name and password. Don’t use any special character in wifi name and password because some time not supported.
@@SMEDehradun I am confused with SSID and password ( should I put my wifi name and password) or something else like my wifi name is "Amit 4G"
SSID means your wifi name & password is password of your wifi.
@@SMEDehradun Wifi name and password mai special character use kiye and correct Wifi name and password Dale he but connection is offline show
Sir I need your help I sent you message on Instagram plz response thankyou
If possible, comment here
@@SMEDehradun ok I am making my project iot based in which I have pir, soil Moisture,DhT sensor relay and motor but in this the relay in operated by control manually by pressing button which is place on breadboard or you can on -off using blynk app , but I want without changing the relay operation I want to add your method too in which if it goes to below 20 then relay automatically operated .
So conclusion
I want to merge both programs and make them as one without changing the operation just wanna add your relay operation in my code plz help if you want the code I can provide.. I want to complete the project and submit in college this my major project .
Thank you
Looking for response
Amit,
Your project idea is good.
So what you want from us?
I have already made individual video for all of them. You just combine all of the code & it will work.
@@SMEDehradun yes I have seen your videos yes I want to all of the to work but I tried but relay is toggling on-off and it's not working properly.
I have program If you want . In that just one code should be added as I mentioned above i want fast because the deadline to submit the project is near plz help🙏
And you can also 📢 Join our Community on Telegram! 🚀
💡 Seeking inspiration for new cool projects? Stuck somewhere? Want to collaborate with like-minded individuals? Join our vibrant community on Telegram! 🌟
🔗 Join Now: t.me/+vJcqQmRQLKYwZWQ1
🙌 Let's connect, collaborate, and grow together! 🌈✨