Hey! are you running the stock J-Pipe and cats with this setup? or this with PCD's and an aftermarket J-pipe? Looking to do this exact setup with an ATLP V3R, not sure about PCD's tho. Love the content!
Awesome work! Learning to weld has been on my todo list for a few years. I need to get off mah butt and get to it. Does that one run off a standard outlet or a 220? Great stuff, man 👍
It sounds like you're doing a pull in a tunnel!! 🔥I got the the atlp exhaust res version with stock cats rv6 jpipe. I'm in California and considering getting pcds. Is it loud? It's pretty tame with stock cats right now.
Nice job bro. I had my flex pipe blow out on me on the jpipe. I ended up welding in a Bellow pipe instead of another flex pipe. Much more sturdy. Should look into it
I've been wanting to do this same exact setup for years but didn't know how it would sound. Glad you did it!. How loud is it compared to a reg straight pipe?
Curious about a side exit exhaust on your car or another 3.5L v6. My bros c63 6.2L amg with a side exhaust back fires and the exhaust is level with the curbs on the road and the sound and pressure bounce off the curb and I’m curious how a v6 would sound backfiring or just cruising
NA v6 with a side exit no cats, no resonator no muffler wouldn’t sound too good imo. You see those race cars v6 on the track with the hood exit exhaust sounds just raw exhaust no good notes 🎶
@GarrettMedia, would you recommend setting my rev limit too 7,400? I got a 4thGen and I’m modding it little bit little, and was told to rev it to 7,500 is I want better times in 1/4 but also in stock retainers and springs as well. Any issues on the 4th yet? How long been running that?
@@jarofhoneyfun8206 I’ve had it to 7600 rpm on my 4GTl for about 3 years now. No issues at all. I did just went back to almost fully stock. Revs to 6800rpm now. Just be careful
@@GarrettMedia think I’ll put it at 7’3 and leave it at that. I’ve also read that raving out that high wouldn’t make much of a difference since apparently we aren’t even in Vtec at that range but idk I’m trying to see what else I can do lol, but, thanks for the feedback back.
do you think if i run a dynomax resonator it’ll sound bad? i already had bought the dynomax resonator but seen that for this single exit setup everyone runs vibrant😭🥲🥲
Gz cleannn . Under the hood that blue is niceeee
Quick tip if you want cleaner welds with very little spatter use a product called Cooter Snot Gel works wonders with DIY Welders.
Appreciate the tip👍
My GoPro screen got destroyed due to the spatter smh
Sounds lovely! The sound of my people 😏
Yessir 🙌
Hey! are you running the stock J-Pipe and cats with this setup? or this with PCD's and an aftermarket J-pipe? Looking to do this exact setup with an ATLP V3R, not sure about PCD's tho. Love the content!
@@hellfire376 thanks! I have pcd and atlp v2 jpipe in this vid
@@GarrettMedia Nice! thanks for the reply man
Recently grabbed me the non resonated 3inch atlp catback man and im loving it. Rv6 jpipe as well
Nice! 3 inch is the way to go
Awesome work! Learning to weld has been on my todo list for a few years. I need to get off mah butt and get to it. Does that one run off a standard outlet or a 220?
Great stuff, man 👍
It was fun welding for sure and worth it. It’s plugs right in to 120v.
It sounds like you're doing a pull in a tunnel!! 🔥I got the the atlp exhaust res version with stock cats rv6 jpipe. I'm in California and considering getting pcds. Is it loud? It's pretty tame with stock cats right now.
Thanks! With your set up adding PCD won’t make it too loud. PCD definitely make it a little bit louder but not too much and also will add power.
Nice job bro. I had my flex pipe blow out on me on the jpipe. I ended up welding in a Bellow pipe instead of another flex pipe. Much more sturdy. Should look into it
Thanks for the suggestion I’ll have to replace mines it’s broken on my 4G 👍
Edits on point man
🙏👊 thanks bro
Good stuff man. Your welding look way better than mine 🤣
Haha thanks 🙏. I should’ve had you weld mines my car would of been faster lol
I've been wanting to do this same exact setup for years but didn't know how it would sound. Glad you did it!. How loud is it compared to a reg straight pipe?
It’s pretty loud but it good loud. Doesn’t sound like crap
Are you here in Houston ? Think I just seen you ripping it here in Bissonnet lol
We need some 4th gen content
Will do ❤️
🔥🔥
Single exit ftw
LOL the home alone clip
Lol 😆
What mount do you have for the exhaust clips?
It’s the GoPro mount
Curious about a side exit exhaust on your car or another 3.5L v6. My bros c63 6.2L amg with a side exhaust back fires and the exhaust is level with the curbs on the road and the sound and pressure bounce off the curb and I’m curious how a v6 would sound backfiring or just cruising
NA v6 with a side exit no cats, no resonator no muffler wouldn’t sound too good imo. You see those race cars v6 on the track with the hood exit exhaust sounds just raw exhaust no good notes 🎶
Do You Havr A CEL For The IMRC Cause Of That Top Plate?
Yup that’s exactly what it’s on for lol
Mine too lol @@GarrettMedia
Do you actually get more hp with a single exit exhaust?
How much would labor be?
🤙🏾🤙🏾
what rubber floor mats do you have?
OEM rubber floor Matt
sorry my bad, talking about for your garage lol@@GarrettMedia
They from Tracktor supply 1/2 inch version.
thanks bro. Keep up the content too. Ive enjoy it alot@@GarrettMedia
What type of single exit I can’t find any????
Trubendz
Двойной выхлоп круче
Still stock springs and retainers? I see you revving up to 7500rpm lol
Yup fully stock 😅
@GarrettMedia, would you recommend setting my rev limit too 7,400? I got a 4thGen and I’m modding it little bit little, and was told to rev it to 7,500 is I want better times in 1/4 but also in stock retainers and springs as well. Any issues on the 4th yet? How long been running that?
@@jarofhoneyfun8206 I’ve had it to 7600 rpm on my 4GTl for about 3 years now. No issues at all. I did just went back to almost fully stock. Revs to 6800rpm now. Just be careful
@@GarrettMedia think I’ll put it at 7’3 and leave it at that. I’ve also read that raving out that high wouldn’t make much of a difference since apparently we aren’t even in Vtec at that range but idk I’m trying to see what else I can do lol, but, thanks for the feedback back.
do you think if i run a dynomax resonator it’ll sound bad? i already had bought the dynomax resonator but seen that for this single exit setup everyone runs vibrant😭🥲🥲
@@alvxissj you can always try it out and if you don’t like it change it 😉
🔥🔥🔥