Windows 10 user. The 192 | 4 interface is very noisy. Last driver was put out in 2021…thanks to this interface I have learned that I should check the support page of any device I’m interested in before purchasing, to see if they’ve abandoned it like this one. Anytime I move my mouse I get digital noises. There is always static that some noise gates can’t even eliminate. I HATE having to return stuff 😂
I was having annoying clicks when listening to music on my M-Track 2x2M with MacOS. I'm not using a DAW, just using the interface as a DAC. The solution was simply to turn down the volume in the music player and this fixed the problem. Unfortunately it's not really a proper fix as it means you need to reduce your volume on every piece of software you use (MacOS does not let you adjust the volume in the OS when using a DAC). And if playing music directly through Finder, there is no volume control. Would be nice to see some drivers from M-Audio for MacOS that would allow adjusting the OS level volume rather than just relying on Apple's audio drivers.
Have you solved the case anyhow? Got the same situation with M-Audio Air 192/6. Lowering the volume should never be the solution. My previous Focusrite didn't have this issue, so I believe we just bought the brand we shouldn't. If I won't find any reasonable solution, will change back to some other Focusrite interface definitely.
If I play a sound from my Daw and then another one from TH-cam or even clicking the windows volume bar, it makes horrible glitching no matter the driver, buffer size, rate etc.... Do you get the same issue seeing you are using a DAW? I also get pops from simply opening an audio player and closing it.
I'm using an Mtrack MkII and for some reason the default buffer rate went changed. I downloaded the driver after that and set it to my preferred buffer rate but everytime the audio console says its streaming (usually when I use it in discord) my applications start to become unable to recognize of hear my inputs
I have had an Air 192/14 and it was full of clicks, audio glitchs and no sound in many other apps or video games, I saw it was a problem with AMD Ryzen CPUs, so I sold it...
I was having an issue where my IEM was sounding noisy in my interface but not when connected directly to PC's headphone jack. Also, this issue wasn't present on my headphones. I noticed that the noise wasn't permanent. I mean, the noise starts (with a subtle pop) when there's an audio signal, stays for a few seconds, then turns off (with a subtle pop) as of the actual headphones amp on my interface is turning on and off. I noticed that my headphones volume on the interface was 100% while on the OS it was just 20%. I set both the interface and OS volume to 50% and the noise is inaudible now (though I can still hear the very slight pop sound of the amps turning on and off. ( I know the volume in OS is supposed to be 100% and should be controlled by the interface, but I like to control volume from the OS because I am lazy, and also because of the fear of wearing out the potentiometer.
any tips here? my Air 192 8 + windows 10 will not keep the bitrate or depth. Seems windows keeps reverting it AUTOMATICALLY upon playback/recording. It causes immediate and continuous dropouts. I've been able to record small bits, but upon saving+reopening, my DAW has a hernia, and the Windows sound settings reverts the bit depth and sample rate to an incorrect setting, the M-Audio control panel keeps flashing "streaming/not streaming" as Windows and M Audio fight tug of war for the sample rate/depth... Idk what to do!
@@moonfallling5964 hey i sort of fixed it on one of my PCs a few months ago ots hard to recall exactly, but i remmber my problem had to do with the specific order of installation, I mistakenly did not folow the manual and the fact i tried plugging in the device at the wrong step. I recall starting fresh and following the manual TO A TEE. Every little step, and it ran fine, ive set it and forget it since then, good luck m8
I have been using the M-Track Solo for almost half a year now and after updating to windows 11 recently somehow my sample rate only detects 44.1kHz when I have been using 48kHz from the beginning. I don't know what causes it not to detect. Please someone help
2:52 In the device dropdown I have the m-audio ASIO driver but when I select it it does not find the hardware. I have the latest drivers and re-installed it hundreds of times and it makes no difference. ASIO4ALL causes the DAW's to lag and crash.
@@inMusicBrandsSupport i have the same problem, mine is connected via usb cable, all drivers isstalled, and is detected by the pc, but on my software wich i used to play guitar ( bias Fx 2 ) and in audio options i choose Asio and cant find the M audio, it says no audio device found
M-Audio released new driver for AIR 192/14 for windows 11. Anyone has tried it already? Does it work? Please check also for other models cause maybe there is also new driver waiting for you.
This line of 192 audio interface is considered the best in quality for its price range but they have worst driver and they does nothing to fix it and their last updated driver was in 2021. I believe many user has email them to fix the driver but they just don't care. As for me, I will never again buy their audio interfaces no matter how great is their marketing ads.
still have Clicks, Pops and Drops off. Even when I watch video, I have freezes in video and audio. When switch back to the built in audio, no problems occur (video plays smooth without freezes, audio has no any sort of distortions). Also tried to do some trick. I've connected a mick to the input of Air interface, and out was set to the built in audio card. Sound was from microphone was clean. Switched output back to Air 192.6, got distortion, and all other sorts of nasty things :/
Habe das gleiche Problem. Komischerweise hat das gleiche Interface an einem Laptop, kein Problem. Ton ist eingefroren und starke Aussetzer! Onboard kein Problem Irgend eine Lösung? Habe ein neuen High Ende Pc
Muss an einem Windows Update Liegen. Aufgefallen ist mir das immer im 32 bit Startet. Audio Latenzen gibt es laut Daw Nicht. 194/14 Habe schon fast alles durch Tag ein Tag aus keine Lösung
@@dirkb9336 got the same problem sometimes, meaning Windows sets this interface to 32 bits O.o On my previos PC I've never noticed such problem, but, as I've mentioned, had different issues anyway.
@@a6adguy955 no, my only guess is a wire thing or a driver thing as it doesn't support windows 11. Idk what to do as i've been on the problem for a while. maybe the driver itself is getting outdated.
@@Snowcen i think is the driver because I uninstalled it (the m-audio air 194 driver) and it was replace by a generic DX 194 driver, wich it sounded better (but wont let me use my interface for recording). As soon as i re-installed the driver the issues came back
M-Audio DUO makes sound like putting your teeth together and blow air through them and so far on 2 DAW's running Cakewalk by BandLab on Windows 10 can't stop it...1 is a laptop and the other is Tower.. It totally sucks.
What about the m-audio 192/6 in ipad pro 12.9 ? Anyone tried it ? I tried it on pc and the input signal was around 5 but on ipad it seems different I have to go around 8 and more, I'm having hard time to set everything (especially for vocal )
Will never buy M-AUDIO again. Bought an Universal Audio Interface a few month ago .... no problems, no weird problem fixes. My old Interface by M-Audio went to my office, and here I go again watching fixing videos and stuff.... just a shitty brand!
I think we can all agree this thing is garbage. I hope Walmart will let me return. It’s literally so embarrassing I can connect my mic with a usb-c to my Mac and it sounds better than a whole ass xlr cable😂 watched two hours of troubleshooting videos and browsed Reddit/the internet for answers and nothing.
AQUI UN COMENTARIO EN ESPAÑOL. Tengo una M Audio Air 192 4 que me vino en un kit. Al conectarla a mi lapsos con Windows 10 pro original crashea y tiene cuelgues. Configurando la placa a 24 bits y 44.1000 mejora un poco pero es engorroso estar haciéndolo cada vez que inicia el sistema. Otra cosa que mejoro fue cambiar la configuración de energia a Alto rendimiento. Y poner que los USB no se apaguen. Tengo una laptop con un I3 y 8gb de RAM. Probé con otra laptop sin Windows original marca EXXO y anduvo sin problemas. Al parecer Windows 10 tiene ciertas limitaciones con la energía de los USB. Pero no estoy seguro. Si saben algo más comenten.
Tengo una laptop con un I3 y 8gb de RAM. Probé con otra laptop sin Windows original marca EXXO y anduvo sin problemas. Al parecer Windows 10 tiene ciertas limitaciones con la energía de los USB. Pero no estoy seguro. Si saben algo más comenten.
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Windows 10 user. The 192 | 4 interface is very noisy. Last driver was put out in 2021…thanks to this interface I have learned that I should check the support page of any device I’m interested in before purchasing, to see if they’ve abandoned it like this one. Anytime I move my mouse I get digital noises. There is always static that some noise gates can’t even eliminate. I HATE having to return stuff 😂
I was having annoying clicks when listening to music on my M-Track 2x2M with MacOS. I'm not using a DAW, just using the interface as a DAC. The solution was simply to turn down the volume in the music player and this fixed the problem.
Unfortunately it's not really a proper fix as it means you need to reduce your volume on every piece of software you use (MacOS does not let you adjust the volume in the OS when using a DAC). And if playing music directly through Finder, there is no volume control. Would be nice to see some drivers from M-Audio for MacOS that would allow adjusting the OS level volume rather than just relying on Apple's audio drivers.
Have you solved the case anyhow?
Got the same situation with M-Audio Air 192/6. Lowering the volume should never be the solution. My previous Focusrite didn't have this issue, so I believe we just bought the brand we shouldn't. If I won't find any reasonable solution, will change back to some other Focusrite interface definitely.
i'm using M Track solo, noise in garageband, Mac M1 how do i fix it?
If I play a sound from my Daw and then another one from TH-cam or even clicking the windows volume bar, it makes horrible glitching no matter the driver, buffer size, rate etc.... Do you get the same issue seeing you are using a DAW? I also get pops from simply opening an audio player and closing it.
Yes I'm getting some disturbance from the audio after recording it when we play that we can hear disturbance from it
I'm using an Mtrack MkII and for some reason the default buffer rate went changed. I downloaded the driver after that and set it to my preferred buffer rate but everytime the audio console says its streaming (usually when I use it in discord) my applications start to become unable to recognize of hear my inputs
What I want to know is why the gain stages on my AIR 196/2 are far too low even with phantom engaged, whether with a Lav or an AT2040.
I have had an Air 192/14 and it was full of clicks, audio glitchs and no sound in many other apps or video games, I saw it was a problem with AMD Ryzen CPUs, so I sold it...
New track duo and my guitar makes no sound, then hard loud static. What gives?
simple case of just changing the driver type to ASIO and all was fixed!
cheers my man!
I'm having clinks and pops using a m audio duo with windows 10 and vmix. Anyone having the same issue to help me how to make it work? Thanks
I was having an issue where my IEM was sounding noisy in my interface but not when connected directly to PC's headphone jack. Also, this issue wasn't present on my headphones. I noticed that the noise wasn't permanent. I mean, the noise starts (with a subtle pop) when there's an audio signal, stays for a few seconds, then turns off (with a subtle pop) as of the actual headphones amp on my interface is turning on and off. I noticed that my headphones volume on the interface was 100% while on the OS it was just 20%. I set both the interface and OS volume to 50% and the noise is inaudible now (though I can still hear the very slight pop sound of the amps turning on and off. ( I know the volume in OS is supposed to be 100% and should be controlled by the interface, but I like to control volume from the OS because I am lazy, and also because of the fear of wearing out the potentiometer.
any tips here?
my Air 192 8 + windows 10 will not keep the bitrate or depth. Seems windows keeps reverting it AUTOMATICALLY upon playback/recording. It causes immediate and continuous dropouts. I've been able to record small bits, but upon saving+reopening, my DAW has a hernia, and the Windows sound settings reverts the bit depth and sample rate to an incorrect setting, the M-Audio control panel keeps flashing "streaming/not streaming" as Windows and M Audio fight tug of war for the sample rate/depth... Idk what to do!
same issue
@@moonfallling5964 hey i sort of fixed it on one of my PCs a few months ago ots hard to recall exactly, but i remmber my problem had to do with the specific order of installation, I mistakenly did not folow the manual and the fact i tried plugging in the device at the wrong step.
I recall starting fresh and following the manual TO A TEE. Every little step, and it ran fine, ive set it and forget it since then, good luck m8
same! M-audio Air have only 24 bits and it returns to 32 for some reason
I have Air 192 4. I have a very bad static sound problem in windows 11 (During recording also). Please someone give a solution...
hey man im facing the same issue too ... did you got any solutions?...... if you git any solutions please do help....thanks in advance
I have been using the M-Track Solo for almost half a year now and after updating to windows 11 recently somehow my sample rate only detects 44.1kHz when I have been using 48kHz from the beginning. I don't know what causes it not to detect. Please someone help
Great and useful video, thank you 👍🏻
2:52 In the device dropdown I have the m-audio ASIO driver but when I select it it does not find the hardware. I have the latest drivers and re-installed it hundreds of times and it makes no difference. ASIO4ALL causes the DAW's to lag and
crash.
Hi! Which M-Audio interface are you using and how is it connected to your computer? Are you using any USB hubs or adapters?
@@inMusicBrandsSupport i have the same problem, mine is connected via usb cable, all drivers isstalled, and is detected by the pc, but on my software wich i used to play guitar ( bias Fx 2 ) and in audio options i choose Asio and cant find the M audio, it says no audio device found
M-Audio released new driver for AIR 192/14 for windows 11. Anyone has tried it already? Does it work? Please check also for other models cause maybe there is also new driver waiting for you.
This line of 192 audio interface is considered the best in quality for its price range but they have worst driver and they does nothing to fix it and their last updated driver was in 2021. I believe many user has email them to fix the driver but they just don't care. As for me, I will never again buy their audio interfaces no matter how great is their marketing ads.
still have Clicks, Pops and Drops off. Even when I watch video, I have freezes in video and audio. When switch back to the built in audio, no problems occur (video plays smooth without freezes, audio has no any sort of distortions). Also tried to do some trick. I've connected a mick to the input of Air interface, and out was set to the built in audio card. Sound was from microphone was clean. Switched output back to Air 192.6, got distortion, and all other sorts of nasty things :/
Habe das gleiche Problem.
Komischerweise hat das gleiche Interface an einem Laptop, kein Problem.
Ton ist eingefroren und starke Aussetzer! Onboard kein Problem
Irgend eine Lösung?
Habe ein neuen High Ende Pc
Muss an einem Windows Update Liegen.
Aufgefallen ist mir das immer im 32 bit Startet.
Audio Latenzen gibt es laut Daw Nicht.
194/14
Habe schon fast alles durch Tag ein Tag aus keine Lösung
@@dirkb9336 got the same problem sometimes, meaning Windows sets this interface to 32 bits O.o On my previos PC I've never noticed such problem, but, as I've mentioned, had different issues anyway.
@@dirkb9336 in next few days I will check if it works ok with laptop.
Mein Laptop hat noch Windows 10 ohne Probleme.
Vielecht deswegen!
My worst product I have ever bought, AIR 192
I have a bad static problem with the Air 192|4
me too
@@Snowcen same, did u guys figure out how to fix it by any chance??
@@a6adguy955 no, my only guess is a wire thing or a driver thing as it doesn't support windows 11. Idk what to do as i've been on the problem for a while. maybe the driver itself is getting outdated.
@@Snowcen i think is the driver because I uninstalled it (the m-audio air 194 driver) and it was replace by a generic DX 194 driver, wich it sounded better (but wont let me use my interface for recording). As soon as i re-installed the driver the issues came back
@@Lihuezapallo Uninstalling it worked
M-Audio DUO makes sound like putting your teeth together and blow air through them and so far on 2 DAW's running Cakewalk by BandLab on Windows 10 can't stop it...1 is a laptop and the other is Tower.. It totally sucks.
What about the m-audio 192/6 in ipad pro 12.9 ? Anyone tried it ? I tried it on pc and the input signal was around 5 but on ipad it seems different I have to go around 8 and more, I'm having hard time to set everything (especially for vocal )
THIS M AUDIO IS NOT GOOD
Definitely my pcs bult in jack sounds better, and its kind of useless for recording guitars, hella buzz, and not the highest of quality.
Will never buy M-AUDIO again. Bought an Universal Audio Interface a few month ago .... no problems, no weird problem fixes. My old Interface by M-Audio went to my office, and here I go again watching fixing videos and stuff.... just a shitty brand!
well now nothing is working 😂
I think we can all agree this thing is garbage. I hope Walmart will let me return. It’s literally so embarrassing I can connect my mic with a usb-c to my Mac and it sounds better than a whole ass xlr cable😂 watched two hours of troubleshooting videos and browsed Reddit/the internet for answers and nothing.
AQUI UN COMENTARIO EN ESPAÑOL. Tengo una M Audio Air 192 4 que me vino en un kit. Al conectarla a mi lapsos con Windows 10 pro original crashea y tiene cuelgues. Configurando la placa a 24 bits y 44.1000 mejora un poco pero es engorroso estar haciéndolo cada vez que inicia el sistema. Otra cosa que mejoro fue cambiar la configuración de energia a Alto rendimiento. Y poner que los USB no se apaguen. Tengo una laptop con un I3 y 8gb de RAM. Probé con otra laptop sin Windows original marca EXXO y anduvo sin problemas. Al parecer Windows 10 tiene ciertas limitaciones con la energía de los USB. Pero no estoy seguro. Si saben algo más comenten.
Tengo una laptop con un I3 y 8gb de RAM. Probé con otra laptop sin Windows original marca EXXO y anduvo sin problemas. Al parecer Windows 10 tiene ciertas limitaciones con la energía de los USB. Pero no estoy seguro. Si saben algo más comenten.
Tienen que mejorar los controladores. Somos muchos los ususarios con estos tipos de errores
lograste solucionarlo?
@@KyozeH si. Me compre una mac y cero problemas jaja. Levanto sin instalar ningún driver. Aparentemente en algunas laptop con Windows pasa esto.
@@israelizkolvídate, es Windows.
This mf casuing bosd on my pc