Percy Jackson hell yes! I bought my 94 150 about 6 months ago. Just did the lift on the rear. Not that bad. Gotta wait for the fronts to come in. These trucks are very nice. Takes special people to appreciate these beauties
I love the looks of my 2013 but this really makes me miss my '95. Exact same as yours only all red. Man I got alot of compliments with that truck and it was reliable as fuck!!!
I actually like your stock more but still amazing looking vehicle you have . I'm glad there's people like us around that don't dent up our vehicles and treat them like a queen . Had the same kind of truck with same tires after I put in my lift kit years ago . Unfortunately sold it due to gas prices was a 95 long bed XLT with scarlet red as the color . Great video
Nathen Wendinger: Not sure why but I cannot reply to your comment on my channel, but anyways cool on your 4" rough country lift. I'm running 33 x 12.50 on my truck and sometimes when your backing and turning at the same time they rub the front bumper just a little, I also had to trim rubber air deflector that's attached to bumper or my tires would have ate it up, our 4" rough country lift recommended max tire size is 33". I think most people that are running 35" are also running body lift with there suspension lift. Post a video when your finished man.
Yea. I put 33s on my bronco 1987. No lift yes stock and I have to trim litle that bumper and plus I have 15x12 wheels so definitely whit 35s Ned to be lift it
I liked it stock better but looks good with the lift. I don't think you could find a nicer truck than that. Color combo is perfect and specs are perfect. Nice!
Hey man hows it going... I previously commented about the center caps and I got the right ones. Now im wondering about the lift. I have the same 4in lift from rough country. Did you remove the stock blocks on the rear? Because mine is riding alittle high in the rear and am not sure if its because i left the rear stock blocks or because I got the wrong coils. Thanks man!
Yes I used the blocks with kit and left the factory blocks on too. I changed the camber on front end also because with the lift factory camber wasn't enough to line the front end, it also brought front wheels back straight which help front end...
i have a 1994 F150 XL thinking of a pro painting job for the red stripe mines a XL longbed white . You have probably the best look out of most ive seen . And i love the after market stuff .
thanks man, as you can see i took out the halo, HID are much better, wished i would have went with 6" now, its just a little more expensive, i guess the 4 " lift will do for now..
Have a 92 F150 427k miles. But it's 2wd and rarely driven off road, gonna keep it stock height. If I had a 4x4 would put a lift for sure. I have the same reverse glow gauges, but speedo one burned out.
I just bought a 1992 f150 5.0 I want to run 35s and a 6” lift but that would require a re gear. So I’ll settle for about a 4” on 33s the truck I bought I paid $1500 for it needs a little transmission work but it’s a good truck. I like what you did to yours I’ll probably do about the same to mine
I was wondering because I leveled mine and I'm wanting a 4 inch lift, but I didn't want to throw it out of align real bad, and I just didn't want to mess nothing up, but thanks I appreciate it
Nathen Wendinger : me and a buddy installed the lift, mainly my buddy, LOL i paid him a small sum, really not much, but around here shops get around $1500. and that includes the lift also, ready to drive when there complete, but i think front end alignment is extra when they install, sorry i couldn't reply directly directly to your comment, but it only says linked comment.
The truck looked nice before the lift ns new wheels but looks incredible afterwards. Can you share the offset on the wheels and is the rough country the only lift or is the body lifted also?
Thanks man, I will be posting a new video soon, getting ready to install a remote electric exhaust catback downpipe cutout on truck, just waiting for it to come in, then i will install and post a video.
Those are great mods too. My family has always owned ford trucks... for better or worse haha. I've been doing some work on my screw f150. I wouldn't mind having a truck like yours though, fun and easier to park.
ZJBOW yea hoping it going to be a fun mod, my family to has always own fords, i guess you can get a dud in any of them, i had a 2004 Lariet 4x4 supercrew, i still miss it... you have a nice looking truck, love the color, you need to post you a walk around of it, i checked out your video on the bed cover, and light mod, nice addition to the good looking truck.....
Good Looking Truck,I have to say I like the Lights you have on it now compared to the Halo Lights....I have a Colonial White 1995 Reg' Cab Short Bed 4x4 Off-Road with the same lift..I also have the BFG 33X12.50's but I kept them on the Stock Bullet Hole Rims.I'm thinking about putting some Dee Zee Diamond Plate Bed Rails like you have on mine,the Guy I bought it from had a Line-X Liner sprayed in it & also had them to spray it up on the top of the Bed Rails.I really don't like the Black Liner up on the Bed Rails especially on the Colonial White Paint,and I think it would look better with the Diamond Plate on it instead.
Habeas J That's cool man, I would go with the 4" lift, it's more common than 3" and the cost should be the same, that's just my opinion thou, good luck with which ever you decide, either will look great...
Did you have problems with getting the truck realigned after the lift? I just bought my second F150 in this body style and this one has been lifted. The alignment seems a little out.
Jacob Gerrells After my 4 in lift, I had to change the camber cam's in order to get the front tires to have the correct camber, then the front end alignment was correct and the truck drove like factory setup, and tires wore evenly....
Thanks, also do you remember where you got your headlight housings? I've been looking at them online, but all the black housed ones have bad reviews didn't know if you have a preference of a pair. Thanks.
thanks man, i also just posted a new video of a cutout that i put on the truck, just something to play around with...check it out, just checkout my channel bugman, if you haven't already seen it...thanks again..
Thanks man, i wished i went 6 inches now, but a little more involved for 6 inch, and a little more expensive too, the 4 inch is pretty simple, I'm still thinking about lifted it to six inches next. Post a video of your truck when your done.
I'm not a ford fan but this is a goodlookin truck! Ya got good taste! My wheels are almost identical to these. How much did you spend on the lift? I bought my truck with a 3inch lift but I'd like to go up an inch or 2.
Thanks for the compliment, I think you can buy the same 4" kit from rough country now for a little over $450 and I had to buy 2 extra shocks, cause my truck had the quad shocks on front.
This is my dream truck. Have a truck a lot like it and want it to look exactly like this. Are those stock running boards and if not do u know where u got them at? Sweet truck. I kinda like the 4 inch lift over the 6 tho tbh. Makes it sit higher but not a showoff look.
Thanks man for the compliment.The running boards are factory, truck has the off road package, from factory, I have also seen the running boards on Eddie Bauer edition also. I wished I had went with the 6in lift, but that's more money and the 4 in was bad enough, lol, thanks again man.
When you installed yours did you regear your truck to 4.10 or 4.56? I have a 95 f150 and I want a 6 inch suspension lift with 35's and I'm not sure if I would have to regear the truck. I looked on F 150 forums and a lot of people are saying go with 4.56 and that's another 500$. Mine either has 3.73 or 3.55 gears now and I heard that with a lift that size and 35's it'd take away power.
where did you get your headlights and gauges? Also, I saw your exhaust video, can you tell me exactly what you purchased for exhaust, i really love the sound.
Travis Hagerty here is a link for the headlights m.ebay.com/itm/121390491546?_mwBanner=1, I got them from eBay a long time ago, the exhaust is one cat and a magna flow glass pack, y off after the glasspack with 2 stainless steel tips, the exhaust was 2" and the tips where 2 1/2, I think I posted a link for the glasspack on the exhaust video, and exhaust work was done by a local muffler shop. Hope this helps man
I honestly can not answer your question, I would not take mine off road, I would imagine with the front springs it should flex 24” easy, but I honestly don’t know.
Damn nice truck man. I bought a 96 raven black with the 5.8(351) EFI automatic 2 wheel drive for 3 grand. It's in awesome shape considering it's almost 20yrs old. I've been researching HID halo projector lights and came across your videos.. I've heard the eBay projectors are crappie but idk. They look cool except for the park lights on top. I'm assuming you can trade out the bulbs in those......do you know much about them?
Thanks man, I had a set of the halo in my truck before I installed lift, that I switched out for HID,( my opinion HID is much, much better) with that said, I was unhappy with the halo, and one reason is because you could not switched out the H7 bulbs ( I'm thinking H7 ) at least not on the brand I bought, and another reason very hard to adjust light beam, if your really leaning towards halo, read the entire add to see if bulbs can be switched out with HID bulbs...I very happy with my HID, and if you could compare them in person, side by side I think most people would prefer HID, but again that's my opinion, and I had both..
No sir, had no problem putting quad shocks back, the truck had factory quad shocks, so it was take off the old and replace with new, but I had to order 2 extra shocks from Rough Country ( make sure they are 2 fronts shocks ) with the kit when I ordered. The kit only had 4 shocks.
@@jbugjc1 Thanks for the reply. I have the same truck but the colors are reversed. I wanted to put the Quad shocks back on it and Rough country said you couldn't and I just didn't see why I couldn't. I like the steps on there also!
@@BrandonGreen-de7bk thank you, and no problem, put them both on, it will look good, it will ride a little stiffer in the front, but not too bad. Good luck buddy.
You could tell me what suspension you put since I see that you put four shock absorbers forward. and I would like to raise my troka anyway in advance I hope you answer thanks exelwnte channel
It is a rough country lift. My truck originally had dual shocks up front, so when you order the kit from rough country, you will half to tell them you need 2 extra front shocks.
bugman I like the 2006 body style ....good choice.... you need to hold on to that truck bro...unless you absolutely had too...I did the same thing with a 95 I lifted. ....and still miss it.....I'll see if I can find some picks of it...show them 2 ya man
Ok man, i having some work done on the 2006, after that I will be posting a video of it too, be a couple of weeks..thou, love to see the pic's of your 95 you use to have..
did you add blocks to the rear or a new leaf pack, i am planning on a 4" by swapping f250 leafs and see whats that does and maybe a shackle flip not sure yet about the front what i am going to do
I stacked the blocks " factory block and blocks that came with lift " it's a little bouncy when driven, but not really bad, pro comp sells a correct leaf spring, check it out on eBay " pages.ebay.com/link/?nav=item.view&alt=web&id=400412449066 " and you do not have to reverse shackles. I thinking about ordering them and unstacking the blocks, but I will have to say, just driving truck under normal condition the stacked blocks work fine.
beautiful truck i have the same exact truck and planning on fixing it up they are strong trucks and have a strong motor. where did u get the headlights, side steps, exhaust, speedometer and the seats pretty much everything that isnt broken lol
Jesus M thanks man, the seat, running boards, are all factory stock items, the headlights and speedometer where order off eBay, although I do believe that the halo glow over lament for the speedometer is no longer available, you can find the one without the tach thou. The exhaust is custom exhaust with magma flow glass pack...
bugman hopefully ill finish it in a couple of months and ill post a vid on my youtube and maybe u could have a look and tell me what more i need to add lol am planning on getting a 4in lift cuz i dont want more than that cuz its a 2wd and it would be useless u know
Nathen Wendinger...no problem man, the offset is -46 and the width is 10" ... Here is a link to the wheels " www.ebay.com/itm/301622150764?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT " , hope this helps man..
+demon216368 i bought them off ebay, they just lay over the factory gauges, they are pretty easy to install, here a link to order them www.ebay.com/itm/92-96-FORD-F150-EXPEDITION-Reverse-BLUE-EL-GLOW-WHITE-FACE-GAUGES-KIT-/370944464691?pt=Motors_Car_Truck_Parts_Accessories&hash=item565e035733&vxp=mtr if the link does not display because of youtube, then check out my channel and i have a video just on the gauges and it has a link to where i bought them, just scroll down in the comment section, if there still available, hope this helps man
+bugman The ones in the link you posted^ are different than the ones in your truck, as far as where the gauges are. The style is different. My 94 F150 is almost identical to yours and has the same style insturment planel. So where can i find the one that fits yours and mine? Thanks and this truck is gorgeous btw.
+Jacob Hubbs I know man, the one I bought is from the same company, I tried to use the link were I bought it and that one no longer available, but imaybe you visit that seller store you might can find the one just like you need, I know somewhere in comment section on my channel, there should be an original post of the exact link where I order it...if I find the exact one, I will post a link, somebody got to still sell it. Sorry man, I hope you find it cause you will like them...
+bugman sweet lookin ford, im running into a problem though how do i determine my lug nut measurements i have a 92 f150 and im putting beadlocks on it?
Hey man just curious. About to buy exact same wheels and tires for my truck. These are the eagle alloy 058 series right? And are these offset any? If so how much? Thanks
Yes they are the "American Eagle style 0589 wheels rims, 15 x 10, 5 x 5.5" polished USA " heres a link for them " www.ebay.com/itm/American-Eagle-style-0589-wheels-rims-15-x-10-5-x-5-5-polished-USA-/301487765602?pt=Motors_Car_Truck_Wheels&hash=item4632123862&vxp=mtr" and yes they have an offset of -44mm, which make them stick out about 1 1/2 inches or so, running tires size 33 X 12.50
@@chrischilders4164 I will look to see if I have a contact for him, but I only have seen it 2 times since I sold it, I will let you know if I can contact him.
Have you ever measured the height of the fenders/floor etc.? Curious to know the height of a 4" lift on 33s ... Want to do ot to mine. Looks great by the way !
Thanks , and I had measurements before I lifted and added the 33, I looked for it, but cannot find them now, but I do know for sure with the 4 inch lift and 33 tires you will gain 5 inches if not a little more...we took measurements before and after just don't know where there at now...
Brandon, thanks man, i bought the truck some time back ( i think 5 years ago or so ) i found the truck ( look forever to get 5 speed and 60/40 split buckets seats and it had to be 4X4 ,and one that was bone stock from factory with all the things above, that hadn't been trashed or tinkered with ) anyway i found a older gentleman in Wadesboro, NC ( about 2 1/2 hours from me ) that had the truck for sale that had bought the truck brand new, and said it sit more than he drove it, so he wanted to sale. So i bought it for $3700. Then pretty much fixed it up a little here and there. I probably have roughly around $8000. + in it now... i want to do the motor ( which there nothing wrong with it ) just want to put a different cam in it, but can not find my way around the Speed density, without changing everything over to MAF....so, i guess that project is on hold, just don't have the money for that right now. sorry for the lengthy answer, just wanted to give it to you straight.
Brandon Dorff That was an individual, that i bought the truck from, so unfortunately he had no other trucks for sale. Craigslist is a good place to look, i have also seen a couple 92-95 F150 4X4 on eBay also. Good luck man.
I feels so happy to be a part of the older f150 community :} I just bought my first 96 4x4 f150 and I dig it very much
Percy Jackson Cool man, congratulations...
bugman by the way that truck is absolutely beautiful. well done, well done indeed.
Percy Jackson thanks man
Same, just got a 94 f150 4x4 5 speed with the 300 straight 6 about 2 weeks ago
Percy Jackson hell yes! I bought my 94 150 about 6 months ago. Just did the lift on the rear. Not that bad. Gotta wait for the fronts to come in. These trucks are very nice. Takes special people to appreciate these beauties
I love the looks of my 2013 but this really makes me miss my '95. Exact same as yours only all red. Man I got alot of compliments with that truck and it was reliable as fuck!!!
That old school Ford must've lived in doors for the body to stay that nice.
I actually like your stock more but still amazing looking vehicle you have . I'm glad there's people like us around that don't dent up our vehicles and treat them like a queen . Had the same kind of truck with same tires after I put in my lift kit years ago . Unfortunately sold it due to gas prices was a 95 long bed XLT with scarlet red as the color . Great video
Mines got scratches here and there but it still gets waxd every month. 1995 f150 xlt long bed 5.0. Pawnee tan with scarlet red stripe
owner of a brown 93 f150 4x4 also have a 2010, best trucks ever made
Great truck bro... Love it, super clean...
Nathen Wendinger: Not sure why but I cannot reply to your comment on my channel, but anyways cool on your 4" rough country lift. I'm running 33 x 12.50 on my truck and sometimes when your backing and turning at the same time they rub the front bumper just a little, I also had to trim rubber air deflector that's attached to bumper or my tires would have ate it up, our 4" rough country lift recommended max tire size is 33". I think most people that are running 35" are also running body lift with there suspension lift. Post a video when your finished man.
Yea. I put 33s on my bronco 1987. No lift yes stock and I have to trim litle that bumper and plus I have 15x12 wheels so definitely whit 35s Ned to be lift it
I have a Southwest edition just like that. I'm planning on fixing her up
Nice truck ! I just bought the same make & model going through the suspension myself.
I liked it stock better but looks good with the lift. I don't think you could find a nicer truck than that. Color combo is perfect and specs are perfect. Nice!
Thanks man
Hey man hows it going... I previously commented about the center caps and I got the right ones. Now im wondering about the lift. I have the same 4in lift from rough country. Did you remove the stock blocks on the rear? Because mine is riding alittle high in the rear and am not sure if its because i left the rear stock blocks or because I got the wrong coils. Thanks man!
Yes I used the blocks with kit and left the factory blocks on too. I changed the camber on front end also because with the lift factory camber wasn't enough to line the front end, it also brought front wheels back straight which help front end...
that's nice truck.... love the colors and the head lights... the truck sits so nice
Thanks man, wished I didn't have to sell
Nice n clean dude👍
Thanks man
Super clean man, where did you get that speedometer??
I order it from eBay, it’s an over layment “ means it’s super thin and just lays over you existing gauges. “
Cleanest obs I've ever seen
Nice truck man
Thanks dude. believe it or not, but paint is all original.
Nice truck, love the factory running boards, so much nicer looking that nerf bars.
Thanks man.
Yes !! Looking Good, like the lift & rims & tires, sweet truck!!!
Thanks
i have a 1994 F150 XL thinking of a pro painting job for the red stripe mines a XL longbed white . You have probably the best look out of most ive seen . And i love the after market stuff .
Mike Ross Thanks man, believe it or not, that is the factory paint on the truck.
That is one beautiful truck! I congratulate you sir!
Thanks man, I appreciate all the positive comments, thanks.
Super Clean Truck. Love this body Style.
Nice lift, I can't decide if I want 4" or 6" on my bronco. I'm gonna look for that in dash though.
thanks man, as you can see i took out the halo, HID are much better, wished i would have went with 6" now, its just a little more expensive, i guess the 4 " lift will do for now..
Me to where can i find that dash
Looks sweet. Getting ready to do the same to my 88 Bronco.
Beautiful truck 👍🏽
Thanks
Have a 92 F150 427k miles. But it's 2wd and rarely driven off road, gonna keep it stock height. If I had a 4x4 would put a lift for sure.
I have the same reverse glow gauges, but speedo one burned out.
Decimate The Weak stick shift? Im looking at a 1992 f-150 custom and its manual
I have the exact same rims on my 95' ford but yours are new and look a lot better
Thanks man, yea they are new, but also hard to keep clean, they water spot very easy.
I just bought a 1992 f150 5.0 I want to run 35s and a 6” lift but that would require a re gear. So I’ll settle for about a 4” on 33s the truck I bought I paid $1500 for it needs a little transmission work but it’s a good truck. I like what you did to yours I’ll probably do about the same to mine
Thanks man, good luck with your truck.
Really nice truck well done!
Thank you!
Nice truck by the way
I was wondering because I leveled mine and I'm wanting a 4 inch lift, but I didn't want to throw it out of align real bad, and I just didn't want to mess nothing up, but thanks I appreciate it
Tyler Johnson No problem man,Trust me, if you change the cam caster, then the alignment will be good.
Nathen Wendinger : me and a buddy installed the lift, mainly my buddy, LOL i paid him a small sum, really not much, but around here shops get around $1500. and that includes the lift also, ready to drive when there complete, but i think front end alignment is extra when they install, sorry i couldn't reply directly directly to your comment, but it only says linked comment.
That's some nice looking tars and wheels
Nice looking ford f-150👍👍
Richard merryman Thanks man
Beautiful truck!!
Thank you!
This is pretty much the perfect truck.
Thanks man, motor work next on the list, sometime in the future..
The truck looked nice before the lift ns new wheels but looks incredible afterwards. Can you share the offset on the wheels and is the rough country the only lift or is the body lifted also?
Thanks man, and the wheels offset is a -44, and the truck only has a 4” rough country lift, no body lift.
Looking good man... truck looks great!
thanks man, your trucks look good too, love that engine rebuild too...
Clean truck! Looks good with the lift and tires etc.
Thanks man, I will be posting a new video soon, getting ready to install a remote electric exhaust catback downpipe cutout on truck, just waiting for it to come in, then i will install and post a video.
Those are great mods too. My family has always owned ford trucks... for better or worse haha. I've been doing some work on my screw f150. I wouldn't mind having a truck like yours though, fun and easier to park.
ZJBOW yea hoping it going to be a fun mod, my family to has always own fords, i guess you can get a dud in any of them, i had a 2004 Lariet 4x4 supercrew, i still miss it... you have a nice looking truck, love the color, you need to post you a walk around of it, i checked out your video on the bed cover, and light mod, nice addition to the good looking truck.....
Not gonna lie you got a nice set up there
Beautiful truck
Thanks, I regret I sold it.
awesome job brother beautiful truck
Tim Leophard thanks man
Good Looking Truck,I have to say I like the Lights you have on it now compared to the Halo Lights....I have a Colonial White 1995 Reg' Cab Short Bed 4x4 Off-Road with the same lift..I also have the BFG 33X12.50's but I kept them on the Stock Bullet Hole Rims.I'm thinking about putting some Dee Zee Diamond Plate Bed Rails like you have on mine,the Guy I bought it from had a Line-X Liner sprayed in it & also had them to spray it up on the top of the Bed Rails.I really don't like the Black Liner up on the Bed Rails especially on the Colonial White Paint,and I think it would look better with the Diamond Plate on it instead.
Really nice truck man!
Just bought a 93 f150 xlt. I love it but want it to be higher. I plan on putting a 3" lift with 33s once I have the money. Hope it turns out well
Habeas J That's cool man, I would go with the 4" lift, it's more common than 3" and the cost should be the same, that's just my opinion thou, good luck with which ever you decide, either will look great...
Did you have problems with getting the truck realigned after the lift? I just bought my second F150 in this body style and this one has been lifted. The alignment seems a little out.
Jacob Gerrells After my 4 in lift, I had to change the camber cam's in order to get the front tires to have the correct camber, then the front end alignment was correct and the truck drove like factory setup, and tires wore evenly....
Thanks, also do you remember where you got your headlight housings? I've been looking at them online, but all the black housed ones have bad reviews didn't know if you have a preference of a pair. Thanks.
Awesome truck love it. I have a 94 f150 and I’m going to add quad shock mounts but did you need to get any extra brackets to add the extra shock?
Hey man I like the Speedo where’d you get it from?
beautiful truck. imho I'd take off the step bars and get a new polished toolbox.
Your truck looks good!
not only is that truck Beautiful but it has one of the nicest stances I've ever seen. where is this truck from?
That's a good looking whip 👍👍
Thank you.
i wish mine was a manul, but for 1200$ and inspected, it fits the budget.
bug man im going to save then buy a 95 Ford F-150 . I love your truck it's beautiful .
Thanks man, sometimes you can run across one that's a good buy, and fix it up the way you want, like I did, thanks again man
at my tech school I take automotive so that is one thing to think about good idea though.
Beautiful!! 😍😁
sweet rig wish I had one!
thanks man, it's taking me some time, to get it like i want it.......
Good looking truck man
thanks man, i also just posted a new video of a cutout that i put on the truck, just something to play around with...check it out, just checkout my channel bugman, if you haven't already seen it...thanks again..
that's a good lookin' rig... before and after...
William Pantano thanks man
How hard was it to install the lift? Thinking about buying a 6" lift and doing it myself. Thanks. Clean truck.
Great truck, i gonna lift mine 6" and its has a 4 speed so its low geared and i got those same lights front and rear :)
Thanks man, i wished i went 6 inches now, but a little more involved for 6 inch, and a little more expensive too, the 4 inch is pretty simple, I'm still thinking about lifted it to six inches next. Post a video of your truck when your done.
That's one sweet ass ford man super nice. Love it!
Thanks dude, i really appreciate the coments...
I'm not a ford fan but this is a goodlookin truck! Ya got good taste! My wheels are almost identical to these. How much did you spend on the lift? I bought my truck with a 3inch lift but I'd like to go up an inch or 2.
Thanks for the compliment, I think you can buy the same 4" kit from rough country now for a little over $450 and I had to buy 2 extra shocks, cause my truck had the quad shocks on front.
This is my dream truck. Have a truck a lot like it and want it to look exactly like this. Are those stock running boards and if not do u know where u got them at? Sweet truck. I kinda like the 4 inch lift over the 6 tho tbh. Makes it sit higher but not a showoff look.
Thanks man for the compliment.The running boards are factory, truck has the off road package, from factory, I have also seen the running boards on Eddie Bauer edition also. I wished I had went with the 6in lift, but that's more money and the 4 in was bad enough, lol, thanks again man.
bugman lol np. Enjoy man. I'll post a pic when mine is finally done.
Cool man, let me know when you post a video or even pictures man.
Sounds good
Clean ass truck man! She's pretty
thanks man....
Ok, helps me alot, thanks man I really appreciate it
Tyler Johnson your welcome, anytime...
Hey one last question... What is the off set on the new rims and how wide is the new rim
Love your truck bud
Thanks man
very nice truck man congrats ;)
Thanks man
When you installed yours did you regear your truck to 4.10 or 4.56? I have a 95 f150 and I want a 6 inch suspension lift with 35's and I'm not sure if I would have to regear the truck. I looked on F 150 forums and a lot of people are saying go with 4.56 and that's another 500$. Mine either has 3.73 or 3.55 gears now and I heard that with a lift that size and 35's it'd take away power.
where did you get your headlights and gauges? Also, I saw your exhaust video, can you tell me exactly what you purchased for exhaust, i really love the sound.
Travis Hagerty here is a link for the headlights m.ebay.com/itm/121390491546?_mwBanner=1, I got them from eBay a long time ago, the exhaust is one cat and a magna flow glass pack, y off after the glasspack with 2 stainless steel tips, the exhaust was 2" and the tips where 2 1/2, I think I posted a link for the glasspack on the exhaust video, and exhaust work was done by a local muffler shop. Hope this helps man
Thanks alot
It looks great!
Thanks man
Looks good man
STR8CHUCK101 thanks man, its been a good truck....
Love this truck!
Scarlett Gossan thanks you
beautiful truck. i have the same year but the xlt 5.0 im looking to put a 4 inch lift on it as soon as i find out why its thumping when i brake
Thanks man, hope you can lift it soon..
One sweet truck
Awesome man!
u should have some mudding videos man nice looking I have a a 1995 Ford but mine is brown and rusty i don't have my license yet
Thanks man, but that truck never got taken off the road, didn't want to mess it up, basically just a show truck...
How’s the flex with that lift? I got a 89 bronco I Was planning to do this with. I want it off-road capable tho, not just for looks.
I honestly can not answer your question, I would not take mine off road, I would imagine with the front springs it should flex 24” easy, but I honestly don’t know.
Nice truck!
Thanks
That's a bad ass truck,
Thanks man, probably will be selling truck in about 2 weeks. I am buying a bigger truck.
Damn nice truck man. I bought a 96 raven black with the 5.8(351) EFI automatic 2 wheel drive for 3 grand. It's in awesome shape considering it's almost 20yrs old. I've been researching HID halo projector lights and came across your videos.. I've heard the eBay projectors are crappie but idk. They look cool except for the park lights on top. I'm assuming you can trade out the bulbs in those......do you know much about them?
Thanks man, I had a set of the halo in my truck before I installed lift, that I switched out for HID,( my opinion HID is much, much better) with that said, I was unhappy with the halo, and one reason is because you could not switched out the H7 bulbs ( I'm thinking H7 ) at least not on the brand I bought, and another reason very hard to adjust light beam, if your really leaning towards halo, read the entire add to see if bulbs can be switched out with HID bulbs...I very happy with my HID, and if you could compare them in person, side by side I think most people would prefer HID, but again that's my opinion, and I had both..
Love your truck, where are you buying your parts from?
Did you have any trouble with putting the Quad shocks back on? Rough Country is telling me that I can't use the extra two shocks with the kit.
No sir, had no problem putting quad shocks back, the truck had factory quad shocks, so it was take off the old and replace with new, but I had to order 2 extra shocks from Rough Country ( make sure they are 2 fronts shocks ) with the kit when I ordered. The kit only had 4 shocks.
@@jbugjc1 Thanks for the reply. I have the same truck but the colors are reversed. I wanted to put the Quad shocks back on it and Rough country said you couldn't and I just didn't see why I couldn't. I like the steps on there also!
@@BrandonGreen-de7bk thank you, and no problem, put them both on, it will look good, it will ride a little stiffer in the front, but not too bad. Good luck buddy.
Should put a headache rack on there buddy... Would look nice... I have a 1996 f150 xl.
I have been looking at them, might just get one, if I do, I will post a new video.
nice truck man
Thanks man
You could tell me what suspension you put since I see that you put four shock absorbers forward. and I would like to raise my troka anyway in advance I hope you answer thanks exelwnte channel
It is a rough country lift. My truck originally had dual shocks up front, so when you order the kit from rough country, you will half to tell them you need 2 extra front shocks.
Sweet truck!
Chris VanOsdol thanks man
good looking truck man..
+Shannon Bunch Thanks Bro, fixing to sell it, just bought a 2006 super crew ford f250..
bugman I like the 2006 body style ....good choice.... you need to hold on to that truck bro...unless you absolutely had too...I did the same thing with a 95 I lifted. ....and still miss it.....I'll see if I can find some picks of it...show them 2 ya man
Ok man, i having some work done on the 2006, after that I will be posting a video of it too, be a couple of weeks..thou, love to see the pic's of your 95 you use to have..
Sounds good bro...hollar at u soon
did you add blocks to the rear or a new leaf pack, i am planning on a 4" by swapping f250 leafs and see whats that does and maybe a shackle flip not sure yet about the front what i am going to do
I stacked the blocks " factory block and blocks that came with lift " it's a little bouncy when driven, but not really bad, pro comp sells a correct leaf spring, check it out on eBay " pages.ebay.com/link/?nav=item.view&alt=web&id=400412449066 " and you do not have to reverse shackles. I thinking about ordering them and unstacking the blocks, but I will have to say, just driving truck under normal condition the stacked blocks work fine.
bugman one more question when you installed the front did you have to do any type of drilling on the frame?
thanks for the fast reply
No problem man, had to remove the rivet's and make holes bigger, the bolts that came with kit where bigger than the rivet holes, wasn't to bad thou.
beautiful truck i have the same exact truck and planning on fixing it up they are strong trucks and have a strong motor. where did u get the headlights, side steps, exhaust, speedometer and the seats pretty much everything that isnt broken lol
Jesus M thanks man, the seat, running boards, are all factory stock items, the headlights and speedometer where order off eBay, although I do believe that the halo glow over lament for the speedometer is no longer available, you can find the one without the tach thou. The exhaust is custom exhaust with magma flow glass pack...
bugman hopefully ill finish it in a couple of months and ill post a vid on my youtube and maybe u could have a look and tell me what more i need to add lol am planning on getting a 4in lift cuz i dont want more than that cuz its a 2wd and it would be useless u know
Jesus M 10-4 man, I wait to see your video, when your done
Muito top, linda demais, parabéns amigo.
Nathen Wendinger...no problem man, the offset is -46 and the width is 10" ... Here is a link to the wheels " www.ebay.com/itm/301622150764?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT " , hope this helps man..
how did you do all the gauges and could you link me to them thx
+demon216368 i bought them off ebay, they just lay over the factory gauges, they are pretty easy to install, here a link to order them www.ebay.com/itm/92-96-FORD-F150-EXPEDITION-Reverse-BLUE-EL-GLOW-WHITE-FACE-GAUGES-KIT-/370944464691?pt=Motors_Car_Truck_Parts_Accessories&hash=item565e035733&vxp=mtr if the link does not display because of youtube, then check out my channel and i have a video just on the gauges and it has a link to where i bought them, just scroll down in the comment section, if there still available, hope this helps man
+bugman The ones in the link you posted^ are different than the ones in your truck, as far as where the gauges are. The style is different. My 94 F150 is almost identical to yours and has the same style insturment planel. So where can i find the one that fits yours and mine? Thanks and this truck is gorgeous btw.
+Jacob Hubbs I know man, the one I bought is from the same company, I tried to use the link were I bought it and that one no longer available, but imaybe you visit that seller store you might can find the one just like you need, I know somewhere in comment section on my channel, there should be an original post of the exact link where I order it...if I find the exact one, I will post a link, somebody got to still sell it. Sorry man, I hope you find it cause you will like them...
+bugman sweet lookin ford, im running into a problem though how do i determine my lug nut measurements i have a 92 f150 and im putting beadlocks on it?
Hey man just curious. About to buy exact same wheels and tires for my truck. These are the eagle alloy 058 series right? And are these offset any? If so how much? Thanks
Yes they are the "American Eagle style 0589 wheels rims, 15 x 10, 5 x 5.5" polished USA " heres a link for them " www.ebay.com/itm/American-Eagle-style-0589-wheels-rims-15-x-10-5-x-5-5-polished-USA-/301487765602?pt=Motors_Car_Truck_Wheels&hash=item4632123862&vxp=mtr" and yes they have an offset of -44mm, which make them stick out about 1 1/2 inches or so, running tires size 33 X 12.50
Truck looks great! Whatever happened to it? I'd love to track it back down one day.
Thanks, that was a dang good truck. Sold it to a gentleman that lived up the road from me, regret ever selling it. He lives in Phafftown now.
@@jbugjc1 good to know. That was my first real truck. Would love to buy it back if possible
@@chrischilders4164 I will look to see if I have a contact for him, but I only have seen it 2 times since I sold it, I will let you know if I can contact him.
how much did you sell the truck for? just curious
$7000.00
Donde puedo conseguir ese tablero?
Have you ever measured the height of the fenders/floor etc.? Curious to know the height of a 4" lift on 33s ... Want to do ot to mine. Looks great by the way !
Thanks , and I had measurements before I lifted and added the 33, I looked for it, but cannot find them now, but I do know for sure with the 4 inch lift and 33 tires you will gain 5 inches if not a little more...we took measurements before and after just don't know where there at now...
sweet truck
Chuey thanks man
Beautiful
bcbp14 thanks
Eddie Bauer s side steps. I need those clean truck
Hey bro first awesome truck, second where did you buy it and how much did it cost? I live in Missouri and I'm looking for a truck exactly like this.
Brandon, thanks man, i bought the truck some time back ( i think 5 years ago or so ) i found the truck ( look forever to get 5 speed and 60/40 split buckets seats and it had to be 4X4 ,and one that was bone stock from factory with all the things above, that hadn't been trashed or tinkered with ) anyway i found a older gentleman in Wadesboro, NC ( about 2 1/2 hours from me ) that had the truck for sale that had bought the truck brand new, and said it sit more than he drove it, so he wanted to sale. So i bought it for $3700. Then pretty much fixed it up a little here and there. I probably have roughly around $8000. + in it now... i want to do the motor ( which there nothing wrong with it ) just want to put a different cam in it, but can not find my way around the Speed density, without changing everything over to MAF....so, i guess that project is on hold, just don't have the money for that right now. sorry for the lengthy answer, just wanted to give it to you straight.
Ya thats fine the info is really helpful. Hope to see more videos in the future. And by any chance did that gentleman have anymore in stock?
Brandon Dorff That was an individual, that i bought the truck from, so unfortunately he had no other trucks for sale. Craigslist is a good place to look, i have also seen a couple 92-95 F150 4X4 on eBay also. Good luck man.
Ok no problem thanks again for the information. I just started looking at a 2002 ford f150 with a 3 inch body lift and 35's for tires.
Brandon Dorff cool man, good luck...your welcome