I’m sure that you know this by now, but just in case you don’t. That hook on top of the spray gun hooks onto the rim of the 5 gallon bucket. Take a large rag or an old shirt and lay that over the bucket rim and hook your gun. This helps with keeping paint mist from going everywhere. That gray and white looks nice. Great job.
You need to turn the tip to the spray direction before spraying your project after the priming process. It appears he did notice and turn to spray position but did not mention it. Thats okay. Just a step that was missed.
Hi Just a few clarification on this machine. 1. How good is this machine in controling over spray . I mean when i use the compressor with a paint machine (not the airless spray) it make a lot of over spray and that over spray stuck above the paint finish in wet areas and later it can be sensed while touching the paint finish wall. 2. How is the result in wood stain or wood polish? Please any one from below comments section can also reply me. Since i need to order this machine and needed to know micro details before i make up my mind to buy it. Please help
For one wall it definitely would have been quicker just cutting in and rolling. Bet it took a good 20 mins to tape it off. I could have cut it in and rolled it in that time with perfectly straight lines
Doing ceilings you get a bit more mist/ spray than doing walls. Cleaning is as simple as placing the suction feed hose in a bucket of water and running it through the system and sprayer until clear water is coming out. That is for water based paints. If using oil base you will need to flush it with mineral spirits. I would also Recommend using a straining net and pour your paint through it to help avoid clogs. I used this same airless painter to do my garage and took 1/5 the time as using a roller. Goes on thicker and no roll marks. You will use more paint ( well I did) but sure looks good.
@@quintonstone7324 but why it will give more mist while doing on ceiling . Is that because the direction of up side down or the distance was less as compare to the wall paint u must have been painting it.
half gal but always need extra because the hose need to be submerge all the time at least maintain lessthan half a gallon.. i painted 2 garage door and 2 door around 1.5 gal
ugh - always have your hand moving BEFORE you pull and release the trigger and never reverse direction while holding trigger. Both can give drips and uneven coverage
![[ไฮไลต์] "บิว" ภูริพล บุญสอน วิ่ง 100m ชาย รอบคัดเลือก | โอลิมปิก 2024](http://i.ytimg.com/vi/3kUSMfgtQ5s/mqdefault.jpg)
I just bought one, I am happy to see that there isn’t much or any over spray. ✌🏼
I’m sure that you know this by now, but just in case you don’t. That hook on top of the spray gun hooks onto the rim of the 5 gallon bucket. Take a large rag or an old shirt and lay that over the bucket rim and hook your gun. This helps with keeping paint mist from going everywhere. That gray and white looks nice. Great job.
thank u
Faster to paint left to right or right to left from bottom to top or top to bottom and 50% overlap!
Excited to get mine! Just ordered one!
The music is way too loud. Half of your words were lost.
You need to turn the tip to the spray direction before spraying your project after the priming process. It appears he did notice and turn to spray position but did not mention it. Thats okay. Just a step that was missed.
Helpful video..ty
Good Job Papa!!!
Always strain your paint through paint strainer prior to using any sprayer!! Prevents clogs and messes!!
NICE!!!
Good job parė.
thanks for posting. :)
Best model small macine ?
Do you have any videos on cleanup and storage
music too loud, can't understand you
Great product but no PPE? No back rolling? Also would have been way faster to roll the wall only if you only planned on painting one wall.
Hi
Just a few clarification on this machine.
1. How good is this machine in controling over spray . I mean when i use the compressor with a paint machine (not the airless spray) it make a lot of over spray and that over spray stuck above the paint finish in wet areas and later it can be sensed while touching the paint finish wall.
2. How is the result in wood stain or wood polish?
Please any one from below comments section can also reply me. Since i need to order this machine and needed to know micro details before i make up my mind to buy it.
Please help
For one wall it definitely would have been quicker just cutting in and rolling. Bet it took a good 20 mins to tape it off. I could have cut it in and rolled it in that time with perfectly straight lines
How much spray was flying in the air if any at all? And how do you clean this thing after usage.
Doing ceilings you get a bit more mist/ spray than doing walls. Cleaning is as simple as placing the suction feed hose in a bucket of water and running it through the system and sprayer until clear water is coming out. That is for water based paints. If using oil base you will need to flush it with mineral spirits. I would also Recommend using a straining net and pour your paint through it to help avoid clogs. I used this same airless painter to do my garage and took 1/5 the time as using a roller. Goes on thicker and no roll marks. You will use more paint ( well I did) but sure looks good.
@@quintonstone7324 but why it will give more mist while doing on ceiling . Is that because the direction of up side down or the distance was less as compare to the wall paint u must have been painting it.
How much paint from the 1galllon did that use?
half gal but always need extra because the hose need to be submerge all the time at least maintain lessthan half a gallon.. i painted 2 garage door and 2 door around 1.5 gal
A spayer is applying 2 coats at once. Keep that in mind you usually only have to apply 1 sprayer coat versus 2 or more using a roller and brush
Hey bro, need some PPE!!! Need a face mask minimum.
Model machine?
How much of the gallon of paint did the machine end up using?
I have another video when i painted our main door and two garage door spend around 1 1/2gal
@@poorboytv3775 thank you for the reply. Keep up the good work!
What is the name of that grey color ?
medici grey
ugh - always have your hand moving BEFORE you pull and release the trigger and never reverse direction while holding trigger. Both can give drips and uneven coverage
What color is that
medici grey
YOU NEED TO TURN OFF THE MUSIC,
How do your lungs feel after breathing in all that spray paint
actually nothing but i realized it when im done already hehe
Do you wear any mask or eye protection?
Can't hear you talking with that goofy music playing in the background.
Pinoy ka sir?
yes po
Boss ok b yan? Dami kse model eh, pero eto mura
ayos lng maganda nmn matrabaho lng preparation kc need cover tlg pra sa overspray and ung linis after gamitin
Ah iniisip ko kse kung yan or ung di baterya na cordless? Tingin m boss?
@@sportsch2418 ah dito kna kesa ung baterya pti mura mura to sa amazon mas mura kesa sa H. depot
@@poorboytv3775 ty bro
So slow……..
If you turn off he annoying music, people could actually hear what you’re saying.
Final decision ( Bibili na ako 😊) Sana di akp mag sisi kamahal din eh😂😂😂😂😂😂😂
ok sya pero matrabaho ang before and after
so its a pressure washer that uses paint instead of water. :)
Can’t hear talk with the music.