Much appreciated! I just ordered my first 3d printer, and I'm going to be doing my own version of the IKEA Lack enclosure. This is going to be super helpful in reusing an old pc fan and managing the inside temperature. Thank you.
Just ordered one from aliexpress after watching your video. There are versions of the module with two fan outputs and I ordered that one since I am planning on using it as a temperature controller to keep the enclosure close to 20C and ventilating the air with an additional intake fan. I might have to use different speeds for intake and out fan due to the filters on the out, so an Arduino with some simple code might be more suitable there, but for 8EUR, why not try this one. Thanks for sharing this Colin, I feel like you're the only one on TH-cam that deals with enclosure ventilation and filtering. It's an extremely important topic, but somehow no one puts any emphasis on its importance in the 3D printing community.
Thanks for the feedback. I suspect the version you are getting has temp control on only one output, the other will just be a fan on off. My next installation is on prusabox and I will be splitting the output to 2 fans, one intake one extractor. I'm glad my experience has been useful for you
@@colinhill I found more detailed setup instrunctions for the module I ordered in a listing for the same product from another seller on aliexpres and it does control both fan outputs. It is written in broken English, but it sems like it is able to setup different speeds and temperatures for the fans. This is actually what I needed in the first place. Now I'm looking forward to playing around with it.
I am using the version of this controller that allows for 2 fans, 2 temp sensors, and a buzzer. I am currently designing, testing, and creating a 3d printed cooling system for a Kicker CXA car amplifier. It's turning out great so far.. still need to do some final touches to it. The board works as advertised. Great electronic board to help with the project.
This looks absolutely amazing, i just ordered the parts, thank you Colin! One qustion, do you know if its possible to connect the fan to two separate controllers? The one from this video and another one letting me to operate it no mater what temperature is? E.g. after the temperature sets down and I just want to ventilate the enclosure properly.
Thanks for putting this together Colin. Any suggestions how to use the PWM (or combined with something else) to set a specific temperature in the enclosure? It seems to me that this method would require significant trial and error to determine where it would middle out.
I will be doing a follow up to show the revised pi controller box with the pwm display. But basically just run the temp probe from the pwm controller into the inside of the enclosure. Set the min/max temps on the pwm that suit the filament you are using. Should be good to go. Perhaps have the follow up next weekend
Hi Colin, thanks for the in depth video! Cause of you I just collected all the mentioned stuff from the PO Box. I will use your design on my TLX for the MK4 and I was just asking myself if you have a new design of the PSU shroud which fits the noctua 40mm you have in this video. Also since the TLX just hs 2 screwholes for the PSU shroud I would be happy to get the step or fusion file for your shrould to change it to the "new" tlx layout.
Hopefully my links will help you. For wires, nothing too thick. 16-22 gauge flexible wire. Or even just fan extension wires. It's only using 12v and less than 1 amp. Good luck
Hello Collin, respect. The circuit is really great explained by you. However, I still have one question for you: Does the circuit also work with a simple 2 cable control of the fan? Greetings Frank
Hi Collin. Thanks. I have 4 noctua fans, pwm. I would like to have them in a server rack, but with possibility to control the speed, due to the possible loud noise. What do you recommend?
Hello. I wanted to know if this device could be connected to a 12v 2-pin fan. And another thing, I want to use it so that the fan starts when the temperature rises below a certain value, and stops when the temperature drops below a certain value. Can that be done with this device? Thank you.
Hi Colin, Thank you for taking the time to produce your informative and pedagogical video. Much appreciated. I have been contemplating doing basically exacly what you did in this video, but with a digital controler solution. I.e. rather than setting things up manually, I would like to set the parameters and access temperature controlers using a zigbee hub (I use Hubitat Elevation). Any thoughts on if and how that could be done?
@@colinhill Thank you for your swift reply. If you ever find you have a few moments to spare it would be interesting to see your thoughts on a solution 🙂
Minute 1:54, you use an extension cable, but have you changed the connector? That white female connector is different, it is wider. What is that connector called? The connector on the Zhiyu board is wider than any 4-pin connector and I don't know which one I should put. Thank you!
There are 4 cable fan extension and splitters on Amazon, but you will need the larger special plug for the PCB mentioned in the description, unpick the fitted plug from the cable and insert the pins into the larger plug.
this is my first real pcb/electronics projects so im a compleet beginner. can somebody help me find the connector he is referring at 1:48? and how do I wire it to the to cable extension?
Can I set the close temperature above the start temperature? That way I never go too slow. I was thinking running 12v dc compressor ,and I think if it runs too slow it might damage the compressor...
Much appreciated! I just ordered my first 3d printer, and I'm going to be doing my own version of the IKEA Lack enclosure. This is going to be super helpful in reusing an old pc fan and managing the inside temperature. Thank you.
Just ordered one from aliexpress after watching your video. There are versions of the module with two fan outputs and I ordered that one since I am planning on using it as a temperature controller to keep the enclosure close to 20C and ventilating the air with an additional intake fan. I might have to use different speeds for intake and out fan due to the filters on the out, so an Arduino with some simple code might be more suitable there, but for 8EUR, why not try this one.
Thanks for sharing this Colin, I feel like you're the only one on TH-cam that deals with enclosure ventilation and filtering. It's an extremely important topic, but somehow no one puts any emphasis on its importance in the 3D printing community.
Thanks for the feedback. I suspect the version you are getting has temp control on only one output, the other will just be a fan on off. My next installation is on prusabox and I will be splitting the output to 2 fans, one intake one extractor. I'm glad my experience has been useful for you
@@colinhill I found more detailed setup instrunctions for the module I ordered in a listing for the same product from another seller on aliexpres and it does control both fan outputs. It is written in broken English, but it sems like it is able to setup different speeds and temperatures for the fans. This is actually what I needed in the first place. Now I'm looking forward to playing around with it.
@@demirmahir that's good news. The one I saw on Amazon didn't allow that
I am using the version of this controller that allows for 2 fans, 2 temp sensors, and a buzzer. I am currently designing, testing, and creating a 3d printed cooling system for a Kicker CXA car amplifier. It's turning out great so far.. still need to do some final touches to it. The board works as advertised. Great electronic board to help with the project.
How'd it turn out sir handsome?
This looks absolutely amazing, i just ordered the parts, thank you Colin!
One qustion, do you know if its possible to connect the fan to two separate controllers? The one from this video and another one letting me to operate it no mater what temperature is? E.g. after the temperature sets down and I just want to ventilate the enclosure properly.
Thank you! This helped really much 😊
Thanks for putting this together Colin. Any suggestions how to use the PWM (or combined with something else) to set a specific temperature in the enclosure? It seems to me that this method would require significant trial and error to determine where it would middle out.
I will be doing a follow up to show the revised pi controller box with the pwm display. But basically just run the temp probe from the pwm controller into the inside of the enclosure. Set the min/max temps on the pwm that suit the filament you are using. Should be good to go. Perhaps have the follow up next weekend
Thank you very much for the explanation, I learned a lot from you. 👍
Hi Colin, thanks for the in depth video!
Cause of you I just collected all the mentioned stuff from the PO Box.
I will use your design on my TLX for the MK4 and I was just asking myself if you have a new design of the PSU shroud which fits the noctua 40mm you have in this video. Also since the TLX just hs 2 screwholes for the PSU shroud I would be happy to get the step or fusion file for your shrould to change it to the "new" tlx layout.
Hi, i have uploaded the step file to Printables, so i can allow you to make a remix. Glad you find the model useful.
Thank you! I will post the remix with your credit when I am done. Have a great "rest weekend"@@colinhill
Hi Collin, thank you for this brilliant video. I try to source the parts. What kind of wires (mm) do you suggest for the power supply? Thank you!
Hopefully my links will help you. For wires, nothing too thick. 16-22 gauge flexible wire. Or even just fan extension wires. It's only using 12v and less than 1 amp. Good luck
@@colinhill Thank you for your quick answer!
Thanks for the video. Does it keep all the settings after power off? Or must I reprogram my temperature settings at each power on?
Yes it does
Hello Collin,
respect. The circuit is really great explained by you. However, I still have one question for you: Does the circuit also work with a simple 2 cable control of the fan? Greetings Frank
A 2 wire fan won't be speed controlled. You would be better using a different type and I cover that in another older video
Hi Collin. Thanks. I have 4 noctua fans, pwm. I would like to have them in a server rack, but with possibility to control the speed, due to the possible loud noise. What do you recommend?
Hello. I wanted to know if this device could be connected to a 12v 2-pin fan. And another thing, I want to use it so that the fan starts when the temperature rises below a certain value, and stops when the temperature drops below a certain value. Can that be done with this device? Thank you.
If you only have a two cable fan then try this th-cam.com/video/iNBipWZxWxI/w-d-xo.htmlsi=YJwO_SIO4L55M0Pv. You won't need the speed control board.
What kind of pins should i buy for this "4 Way 3.96mm PCB Connector Housing" ?
If you can find the plug then I'm sure there will be a link for the relevant pins on whatever store you use.
Hi Colin, Thank you for taking the time to produce your informative and pedagogical video. Much appreciated. I have been contemplating doing basically exacly what you did in this video, but with a digital controler solution. I.e. rather than setting things up manually, I would like to set the parameters and access temperature controlers using a zigbee hub (I use Hubitat Elevation). Any thoughts on if and how that could be done?
Hi. Would like to do the same but not had time to investigate.
@@colinhill Thank you for your swift reply. If you ever find you have a few moments to spare it would be interesting to see your thoughts on a solution 🙂
Minute 1:54, you use an extension cable, but have you changed the connector? That white female connector is different, it is wider. What is that connector called? The connector on the Zhiyu board is wider than any 4-pin connector and I don't know which one I should put. Thank you!
Hi, please see the description as I mention details
@@colinhill Oops! Thank you!
Hi Collin, I cant fin a cable that goes out from the pcb to a fan splitter, can you help me out^ Thanks for the vid!
There are 4 cable fan extension and splitters on Amazon, but you will need the larger special plug for the PCB mentioned in the description, unpick the fitted plug from the cable and insert the pins into the larger plug.
thank you!@@colinhill
this is my first real pcb/electronics projects so im a compleet beginner. can somebody help me find the connector he is referring at 1:48? and how do I wire it to the to cable extension?
Assume you looked in the description which details the connector type. You will need to chop the end of the ext cable and fit new pins. Good luck
Can I set the close temperature above the start temperature? That way I never go too slow. I was thinking running 12v dc compressor ,and I think if it runs too slow it might damage the compressor...
No.
THANKS
4:30 for set up