Click on Post Process > Select Mill 3 Axis (From Post Processor) > write "MPF" in File Extension>Select Unit as Metric/Inch > Click apply and Program will be generated. Delete N20; N30; N50 Lines once program is generated. Load program on Machine and verify it.
Sir after I did the rough milling operation, as you have shown in the vedio some material is still remaining for removing during finish milling. But when I did the in my computer it's not happening, no extra material is left after rough milling, all parameters are same, what can be the reason?
You got three options, 1. Rough Mill - It keep 1 mm material on adjacent sides. (Finishing allowance of 1 mm) 2. Semi finish - It keep 0.3 mm material on sides. (Finishing allowance of 0.3 mm) 3. Finish Mill - It removes all material from selected faces. (No allowance for finishing.)
@@vivek_pateI Hmmm. But when i try on NX 1926, i see no difference between rough, semifinal, and final. Or i must set the "Floor Final Stock & Wall Final Stock" manually?
Goto Simulate machine and play simulation. You will be displayed machining time. Just make sure that you have specified feeds and speeds. If you have multiple operation then select multiple operation and run simulation. Total machining time will be displayed.
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Great in depth content with clear understanding and demonstration of variety of options. 👌
Glad it helped!
Very useful
Nicely explained sir
Thanks and welcome. Keep Watching!!
Crisp & clear content..
How to make a 2d program for agnle face/profile? Can you explain? In g41, g42. Please🙏
I'll prepare a video and share it.
@@vivek_pateI thanks 👍
Really Helpfull..
Glad it helped
Thank you
You're welcome
Hii sir please make more videos on manufacturing
We will try
Sir i want to learn CAM can you guide me as a mentor
Sir Please Arrange Workshop On NX
We will arrange it.
👍👍👍
Sir how to genrate progrmme in text formate please explain
Click on Post Process > Select Mill 3 Axis (From Post Processor) > write "MPF" in File Extension>Select Unit as Metric/Inch > Click apply and Program will be generated.
Delete N20; N30; N50 Lines once program is generated.
Load program on Machine and verify it.
👌👌👏😄
Glad you liked it!
Sir after I did the rough milling operation, as you have shown in the vedio some material is still remaining for removing during finish milling. But when I did the in my computer it's not happening, no extra material is left after rough milling, all parameters are same, what can be the reason?
You must have selected Walls along with the floor. Just select the floor and verify it.
@@vivek_pateI yeap worked very well
Goto cut parameters then click on the stock and make all value zero
Sir. What is the different of "ROUGH_MILL" with "FINISH_MILL"?
You got three options,
1. Rough Mill - It keep 1 mm material on adjacent sides. (Finishing allowance of 1 mm)
2. Semi finish - It keep 0.3 mm material on sides. (Finishing allowance of 0.3 mm)
3. Finish Mill - It removes all material from selected faces. (No allowance for finishing.)
@@vivek_pateI Hmmm. But when i try on NX 1926, i see no difference between rough, semifinal, and final. Or i must set the "Floor Final Stock & Wall Final Stock" manually?
Please share photo graph of machined edges for rough cut and finish cut on vivekpatel981@gmail.com
@@vivek_pateI Okay Sir, please check your email. Thankyou
How to measure cycle time ..any option
Goto Simulate machine and play simulation. You will be displayed machining time. Just make sure that you have specified feeds and speeds.
If you have multiple operation then select multiple operation and run simulation. Total machining time will be displayed.