@@Konomi_io Well most ppl that say that their skin is private, they paid to commission someone to make their skin. It's their skin so, they decide if they want to share it or not. Dunno how that's hard to figure out
@@dianinha5502 Even if that is the case, it literally doesn't cost them anything / they don't lose anything by sharing the skin. Why would they not do it then?
An easier and cheaper way is to just remove the buttons by simply pushing them out, you can do that on any pen too. Then you fill the hole with whatever you want: silicone, hot glue, clay. Then you wrap the pen in tennis grip and you won't feel the hole. Or if you don't want to use tennis grip, you make sure the finish on the hole is flush with the pen, which is tricky to achieve but not impossible, I've done it successfuly twice with hot glue, by sanding it down flush
I removed my pen buttons and I actually like feeling the hole because its a flat-ish surface I can rest my index finger on, which helps with stability and I can feel where the right spot is. Grip tape is over the hole btw, I can feel it through the tape.
@@OJX. if you are a sweaty boy eventually the pen stops working at least thats what happened to me. kid you not i have had to buy 3 pens now. i recommend you put one layer of tape and it will still have that groove that feels nice, or just fill it in
honestly you should sell the pens, bcs im guessing they're cheaper than a whole 3d printer, and since most of us dont have one, we'd be more than happy to buy the pen, and you guys could make a profit on it too. it's a win-win
i made the pen, very pen. 0.12mm layer height on fdm printer with petg filament (printed horizontally with brim) i used adjustable pliers to open and destroy the wacom pen (very epic)
@Spazza17 You should try soldering a 1.5V button battery to the pen pcb and glue it at the top in place of the eraser. That would increase the pen hover distance. That's because the pen gets power from the tablet, but as you go further away, it gets less and less until it's not enough to transmit a signal strong enough for the tablet to detect. If you provide it with external power, it should always transmit at full power so the hover should increase . If you're interested lmk, I did some research on it already.
I heavily doubt this is how it works, but hey, I'm not the one who's opening up their tablet pen in the process. Wacom pens work with magnetic fields instead of battery power, and I heavily doubt running a charge through a batteryless tablet pen is a good idea.
@@notTerabyte I heavily doubt you know what you're talking about, pls inform yourself first. The tablet, for a really small time, emits a changing magnetic field which by induction, charges a capacitor in the pen. Then, for a moment, the tablet goes into "listen mode", which means it doesn't emit a field anymore but instead it listens for changes in the field by the pen thus detecting the pen position. The pen uses the previously stored energy to emit the field. The tablet switches betweem these 2 modes really fast. The pen continusly charges and discharges. By connecting a battery, you make sure it's always charged and it always can emit it's field at the max power
@@notTerabyte exactly, wacom pens don't use battery power, they constantly collect power from the tablet through the field, then use that power to emit their own field. Batteryless doesn't mean passive pen, wacom pens clearly use power, you can consider the capacitor as the pen "battery". The idea is to simply improve where they get the power from
@@notTerabyte You heavily doubt running a charge through a batteryless pen is a good idea, LOL. So what do you think the PCB is for? You know the PCB has copper "wires", chips? guess what runs through those? Exactly the charge you heavily doubt. Again, batteryless doesn't the board isn't powered, it just means it doesn't get power from a battery, that doesn't mean you can't give it power from a battery, it doesn't care where the electrons come from you know?
hey, all i can say is, i didn't do the research, all i know was i posted my own comment at 2am without any thought. sounds like an interesting idea at the end of the day but just soldering in a triple a doesnt sound effective
here is the thing about pen buttons, I'm a digital artist, I never use them ever, matter of fact, I acidentally press them and sometimes its infuriating
@@roptant ohhh i didnt understand the point of the entire comment but i get it now lmfao. And yeah it's crazy to think I started when it seemed like whitecat would never be dethroned and now he's almost out of top 10
:3
:3
@@NotDerpyFox hello spazzaAA!!!
:3
:3
:3
Huge respect to spazza for sharing the 3D files while some streamers are ready to kill anyone to keep their skins private :)
Diallo
i never understood the whole "my skin is private stop asking!!!!" thing
@@Konomi_io
Well most ppl that say that their skin is private, they paid to commission someone to make their skin.
It's their skin so, they decide if they want to share it or not. Dunno how that's hard to figure out
@@dianinha5502 It is never a paid commision. Its just a edit they did.
@@dianinha5502 Even if that is the case, it literally doesn't cost them anything / they don't lose anything by sharing the skin. Why would they not do it then?
An easier and cheaper way is to just remove the buttons by simply pushing them out, you can do that on any pen too. Then you fill the hole with whatever you want: silicone, hot glue, clay. Then you wrap the pen in tennis grip and you won't feel the hole. Or if you don't want to use tennis grip, you make sure the finish on the hole is flush with the pen, which is tricky to achieve but not impossible, I've done it successfuly twice with hot glue, by sanding it down flush
to "sand" hot glue flush use IPA, it will dissolve the glue and rub it with something soft
just remove the buttons and put tape over the hole its not that deep bro
I removed my pen buttons and I actually like feeling the hole because its a flat-ish surface I can rest my index finger on, which helps with stability and I can feel where the right spot is. Grip tape is over the hole btw, I can feel it through the tape.
@@OJX. x2
@@OJX. if you are a sweaty boy eventually the pen stops working at least thats what happened to me. kid you not i have had to buy 3 pens now. i recommend you put one layer of tape and it will still have that groove that feels nice, or just fill it in
The Collab i Always hoped to happen
Massive respect for making this. I think WhiteCat set the Angreifer 1k choke right after he got the pen yall made so it definitely works. W
I use the same grip as whitecat but im glad that the buttons actually are there it reminds me where my pointy finger/all fingers needs to be exactly
Derek and BlackDog5 aren't people i expected to see a collab from, but i sure needed it.
Gotta enjoy the sensational collab of community and content creation. Lets go!
wow, i didn’t know that it took this much planning and effort to make that pen for whitecat, respect❤
you and the gang deserve all the love
Just threw my pen across my room, now I got a buttonless pen!
Holy shit the roundtable plug at the end absolute giga chad
honestly you should sell the pens, bcs im guessing they're cheaper than a whole 3d printer, and since most of us dont have one, we'd be more than happy to buy the pen, and you guys could make a profit on it too. it's a win-win
i made the pen, very pen. 0.12mm layer height on fdm printer with petg filament (printed horizontally with brim)
i used adjustable pliers to open and destroy the wacom pen (very epic)
i just simply removed my buttons from my pen
@Spazza17 You should try soldering a 1.5V button battery to the pen pcb and glue it at the top in place of the eraser. That would increase the pen hover distance. That's because the pen gets power from the tablet, but as you go further away, it gets less and less until it's not enough to transmit a signal strong enough for the tablet to detect. If you provide it with external power, it should always transmit at full power so the hover should increase . If you're interested lmk, I did some research on it already.
I heavily doubt this is how it works, but hey, I'm not the one who's opening up their tablet pen in the process. Wacom pens work with magnetic fields instead of battery power, and I heavily doubt running a charge through a batteryless tablet pen is a good idea.
@@notTerabyte I heavily doubt you know what you're talking about, pls inform yourself first. The tablet, for a really small time, emits a changing magnetic field which by induction, charges a capacitor in the pen. Then, for a moment, the tablet goes into "listen mode", which means it doesn't emit a field anymore but instead it listens for changes in the field by the pen thus detecting the pen position. The pen uses the previously stored energy to emit the field. The tablet switches betweem these 2 modes really fast. The pen continusly charges and discharges. By connecting a battery, you make sure it's always charged and it always can emit it's field at the max power
@@notTerabyte exactly, wacom pens don't use battery power, they constantly collect power from the tablet through the field, then use that power to emit their own field. Batteryless doesn't mean passive pen, wacom pens clearly use power, you can consider the capacitor as the pen "battery". The idea is to simply improve where they get the power from
@@notTerabyte You heavily doubt running a charge through a batteryless pen is a good idea, LOL. So what do you think the PCB is for? You know the PCB has copper "wires", chips? guess what runs through those? Exactly the charge you heavily doubt. Again, batteryless doesn't the board isn't powered, it just means it doesn't get power from a battery, that doesn't mean you can't give it power from a battery, it doesn't care where the electrons come from you know?
hey, all i can say is, i didn't do the research, all i know was i posted my own comment at 2am without any thought. sounds like an interesting idea at the end of the day but just soldering in a triple a doesnt sound effective
the surface should have dense spiral grooves that make the pen self-adjust itself in your hand constantly :D
You could sell the pen and donate the revenue to the roundtable.
Ngl it looks like a SMART Whiteboard Pen Pack (Black, Blue, Red, Green) without the colors.
You shouldve taken the Wacom Pen without eraser and shorten it so its just the bottom part. I cut mine in half and it feels like two worlds.
Waited so long for this vid
amazing video!
The Rush for Resine
grandpa is back 🗣🗣💯💯
The Wooting of tablet pens.
tbh, I kinda like the buttons, for almost anything but osu, these buttons are extremely useful!
but still, great job!
I just disabled the buttons inputs in my Wacom tablets settings, and wrapped a tennis grip all around the pen, 👍
i literally just ripped off the buttons and covered it with tape lol, it also helped me with grip
spazza new videos makes my day
The bamboo pen would have worked with cth-480. I used one when when my old pen broke, and I don't think whitecat uses the eraser.
My dog Bit my pen thinking It was food and now The pen buttons don't work and it is swinging
rip sakura no uta
I just hold pen in a way that I don't feel those buttons... Problem solved, didn't have to spend a penny.
unpredictable collab
Pensavo avesse fatto una rissa.
6:13 where can i find the whole video of the tutorial on opening the pen
So fun to see spazza go from shitting on a 12 year old white cat for "cheating" to collabing with him. Beautiful
you deserve a lot of love man!!!
He was indeed Zmiling
I had a working prototype a few months back, only problem was that I accidentally broke the coil on the pen so it was completely fucked
what a wholesome video
PLEASE SHARE THE TUTORIAL FOR OPENING THE WACOM PEN, I BEG YOU
What a great video
6:51 look ma, i made it in a spazza video!!11!!!!!1!
do you (or anyone else) know if the ctl472/672 pen PCB would be compatible?
IM BACK BBY THE MAIN CHARACTER ARC CONTINUES
A bug that is an accident.
Yoooo spazza vid
here is the thing about pen buttons, I'm a digital artist, I never use them ever, matter of fact, I acidentally press them and sometimes its infuriating
make penless pen next
I have six sense for disapeared youtubers.
we are one step closer to 3d printing your own tablet case for custom colors
I mean that would be a lot easier than printing a pen. The ctl472 is just a PCB sandwiched between 2 sheets of plastic
lets goooo
Anyone knows if this would work on a CTL 672 pen??
former number 1 player, currently top 10 😭😭😭😭😭😭😭😭
What is so funny
@@aizuuya im not even making a joke its just crazy to think that whitecat is almost of top 10 rn
@@roptant ohhh i didnt understand the point of the entire comment but i get it now lmfao. And yeah it's crazy to think I started when it seemed like whitecat would never be dethroned and now he's almost out of top 10
Spazza il buon guaglione
A fellow mania player! 😎
i see its only for the cth -- 480. does it work on the ctl -- 472? and if yes, where can i buy it?
i wonder if you want to make the same thing but for ctl 472 pen
just remove the buttons and wrap the pen in grip tape.
9:27 well that was funny lmao
WW
nice job!
I just took the buttons off the tablet pen.
Lmao he's a quantum enigma enjoyer 5:18
I like the buttons .-.
Omg tobey maguire
Now make a better pen nib that doesn't wear out OwO (impossible)
wow spazza looks like me apparently
I just taped over the buttons
that could still be a problem because it could lift up and down a bit.
if anyone with ctl-4100wl prints it lmk if this works for that pen
W
wow thus vid is new
WAS?!
Does anyone know the map name at 1:25 ? Thanks !
flower dance
I need one for the 472
7:23 f2p on genshin be like
pog
nice
wait is it not good to play osu without pen nibs
I just removed the buttons
yo can i buy this i dont have a printer 💲
There's companies you can pay to 3d print stuff for you, could just use one of those
Ok ok, I don’t know who this guy is or even what osu is. But can I just say the thumbnail of him looks like bully maguire
If anyone is selling this pen I'd buy it happily as I do not have a resin printer xd
kbd67 lite???
Ayo
Hewwo
balls
Well i just remove them LMAO
Hello handsome homeless man
Permanent Solution: Play Mouse
1,700th like