When the doors close for the second time (after holding and releasing the door open button) the lift appears to move very slightly (1cm), and after this this when the problem occurs. The car is still situated within the door zone, so the doors recycle.
mrmattandmrchay:Oh, let''s see what that does, shall we? Switch:Click.(Echoes) Lift:(Up arrow shows) (Goes up to a floor) (Up arrow shows) (Goes to 10th floor) (lift stops) (Displays floor 10) mrmattandmrchay:Door doesn't open. (Presses no.10 twice) Lift:(thinking) I"M MAD! (Opens doors a bit then closes doors) mrmattandmrchay:(Presses 4&G) Lift:(Goes down) (down arrow displays) (floor 4 Displays) Lift:I've had enough. (Breaks down) mrmattandmrchay:(Laughs because fire service failed) continiues
Did you ever get the lift running again? I wonder what would have happened if you turned off the fireman's switch? And what on earth made it act so strangely?
WestCoast Elevators Let me say that, we exited the building asap LOL. I'd like to go back there actually, but this is far away from where I live. What made this? I don't know, I think that the lift is so old that the doors require a 'bang' shut to close the contact. If don't open the doors enough, then this does not generate enough force when they shut (not enough momentum). Unless you try the fire function, then the doors will always start shutting from being fully open, so I suppose you would never get this problem! I also assume that, if the door doesn't latch shut within a certain time, then the lift locks out. It's an old lift, so it probably required resetting and doesn't have an automatic 'retry' system.
The control works a bit differently on lifts with switches such as this. The fire service is automatically operated by the fire alarm, and the switch turns on stage 2, fireman's control. This may a reason why the controller got confused as stage 1 was never activated.
... Lift:(Thinking)STOP LAUGHING! mrmattandmrchay:(Presses Express lift call button for other lift) Lift 2:I'm not gonna break down! mrmattandmrchay:(Presses Green button) Lift 2:I have all day... Lift 2:OKAY, OKAY!!!!! Lift 2:(Floors display as going down.) Lift 2:(Reaches Ground) There! But I'm not gonna move anymore! Woman waiting for Lift 1:(Thinking) Where on earth is the lift!?? mrmattandmrchay:(Runs for it :D)
it may have been the shunt trip which goes off when heat is detected in the mechanical room or shaft it may have been faulty OR if there is more than one elevator in the lobby you should check if all of them go down to the lobby if not there’s an issue AND behind the panel there’s fire controls which have a light that indicates if there’s an issue
Well good thing they did put a phone button in it because if that wasnt there and the doors refused to open you would be in alot of trouble unless you had a mobile phone
Did you go back in and set the lift to its normal running mode? If so, did it help? Still too bad you did not get stuck and needed rescue, that would have been an even better video to post! I have been stuck twice. Once when only the inner doors opened but they did not catch onto the outer doors so i had to push the outer ones open and once by abusing the emergency stop as call cancel to get an express ride. I was in a door zone so i got stuck and needed a rescue. No video phones back then...
+Lisa Skrepnek We didn't touch that one lol, else you'd have the whole building queuing for lifts (I've been in this situation once already lol, correction TWICE before)- +ratedparental +harrihealey02
SwordSweeper127 the reason is that if the firefighters want to go to a floor and they see fire they can immediately go to another floor sometimes they have an emergency stop button. The reason for the doors is so that when a firefighter gets to a floor to look for fire he doesn't want them open for like 2 minutes and so if there is fire he can immediately close it and drop down
The car should stop with the doors staying shut then return to the ground floor (if that is the designated floor) and then switch over to car preference control.
1st Off, The Fire service is just a switch not a key switch, 2 You need to operate by Inserting a key in and turn it to on, This will Recall the elevator, Turn the key to on in the car, Then Select the floor and close until the door closes Completely, If you made a mistake on a floor turn the elevator FS Off Or press the Call Cancel Button, If you are in the floor, Press the open until it complete fully, If you want to disable it you must turn the elevator to bypass and turn it off, Same for the floor level.
Needs fixture all those elevator, what purpose cease up to the stuck operating for elevators at all times! That's not good enough elevators improvement test isn't.
@Nice_Choices No, it isn't. in the UK, the switch that is triggered outside should do all the work. Look at some of Beno's videos for examples he films Lifts in the UK
![ELEVATOR FAIL COMPILATION [300 Special]](http://i.ytimg.com/vi/zC-9gjiyEi4/mqdefault.jpg)
![ELEVATOR FAIL COMPILATION [300 Special]](/img/tr.png)
on fire mode, you have to hold the open button. the door stay close to protect fireman from flames
And the doors close as soon as you let go of the button incase the landing is in flames its known as peekaboo doors lol
Thanks
Yes. As an elevator fan, he should know that!
In the infamous words of Photonicinduction: "You popped it!" "Naughty... ".
David Irwin I have watched photonics induction
To mrmattandmrchay Would you say that the elevator you did the demo in or the Express lift across the hallway is a little faster?
When the doors close for the second time (after holding and releasing the door open button) the lift appears to move very slightly (1cm), and after this this when the problem occurs. The car is still situated within the door zone, so the doors recycle.
2:33: the one time I've seen a nontrivial video effect like this look decent. Nicely picked.
I'm actually embarrassed by that transition lol!!
Thats strange in the UK they dont have the phase one and phase 2 fire service its activated with just one switch
hiya, this is Pinnacle Studio 15 (now Avid) - quick and easy to use.
mrmattandmrchay:Oh, let''s see what that does, shall we?
Switch:Click.(Echoes)
Lift:(Up arrow shows) (Goes up to a floor) (Up arrow shows) (Goes to 10th floor) (lift stops) (Displays floor 10)
mrmattandmrchay:Door doesn't open. (Presses no.10 twice)
Lift:(thinking) I"M MAD! (Opens doors a bit then closes doors)
mrmattandmrchay:(Presses 4&G)
Lift:(Goes down) (down arrow displays) (floor 4 Displays)
Lift:I've had enough. (Breaks down)
mrmattandmrchay:(Laughs because fire service failed) continiues
3:53 The door randomly opens!!!???
Lol someone was waiting for the broken one ;)
Lol you are a legend, going through and trolling these poor elevators! I got stuck in a elevator once, and immediately thought, what would you do😂
+Haidyn Lee Answer is to get out phone and start recording haha! Press the alarm button and film the rescue.
AH- ha! now I know why modern elevators / Lifts have key switches for Fireman's Mode VS a Toggle
Did you ever get the lift running again? I wonder what would have happened if you turned off the fireman's switch? And what on earth made it act so strangely?
WestCoast Elevators Let me say that, we exited the building asap LOL. I'd like to go back there actually, but this is far away from where I live. What made this? I don't know, I think that the lift is so old that the doors require a 'bang' shut to close the contact. If don't open the doors enough, then this does not generate enough force when they shut (not enough momentum). Unless you try the fire function, then the doors will always start shutting from being fully open, so I suppose you would never get this problem! I also assume that, if the door doesn't latch shut within a certain time, then the lift locks out. It's an old lift, so it probably required resetting and doesn't have an automatic 'retry' system.
Switching it off the lift should return to normal service its in the British standard
mrmattandmrchay it may have been the shunt trip which goes off when heat is detected in the mechanical room or shaft it may have been faulty
Should have phoned it in to the council office!
@@allenbraithwaite106 "4 years ago"😂
The control works a bit differently on lifts with switches such as this. The fire service is automatically operated by the fire alarm, and the switch turns on stage 2, fireman's control. This may a reason why the controller got confused as stage 1 was never activated.
"What.Have.We.Done?" 😂
'So number 3 and then it will shut properly'
*click*
*nothing happens*
'OOOoooo'
LOL
...
Lift:(Thinking)STOP LAUGHING!
mrmattandmrchay:(Presses Express lift call button for other lift)
Lift 2:I'm not gonna break down!
mrmattandmrchay:(Presses Green button)
Lift 2:I have all day...
Lift 2:OKAY, OKAY!!!!!
Lift 2:(Floors display as going down.)
Lift 2:(Reaches Ground) There! But I'm not gonna move anymore!
Woman waiting for Lift 1:(Thinking) Where on earth is the lift!??
mrmattandmrchay:(Runs for it :D)
Was the lady at the end with you? Or was it some poor stranger trying to use the lift you’ve just broken?
The one you did the demo on seemed to have been added after the express one across the hall because it was less beat up
Yes I agree. The one at the back was left as it's not used as much as the front one maybe.
Well it only makes sense because fire service came out in 1973 and it is possible that it was upgraded at a later time
it may have been the shunt trip which goes off when heat is detected in the mechanical room or shaft it may have been faulty OR if there is more than one elevator in the lobby you should check if all of them go down to the lobby if not there’s an issue AND behind the panel there’s fire controls which have a light that indicates if there’s an issue
2:40 omg the doors litteraly stick out like a sore thumb they dont go all the way into the wall like theyre meant to do
Remember to hold to door open button when your in fireman mode. If you push the button once you might break the lift
Lol, very funny and interesting! Nice vid Matt! :)
Is that an express lift?
Well good thing they did put a phone button in it because if that wasnt there and the doors refused to open you would be in alot of trouble unless you had a mobile phone
yes ;) oops!
Did you go back in and set the lift to its normal running mode? If so, did it help?
Still too bad you did not get stuck and needed rescue, that would have been an even better video to post!
I have been stuck twice. Once when only the inner doors opened but they did not catch onto the outer doors so i had to push the outer ones open and once by abusing the emergency stop as call cancel to get an express ride. I was in a door zone so i got stuck and needed a rescue. No video phones back then...
Nice video
Did you break it?
i think he don't know
u have to hold the button until the door opens/closes completely or it will not move
the other one works
+Lisa Skrepnek We didn't touch that one lol, else you'd have the whole building queuing for lifts (I've been in this situation once already lol, correction TWICE before)- +ratedparental +harrihealey02
Was this planned/Legal?
Fireman mode is supposed to be like that.IDK why though
It's not supposed to eventually go out of service though ;)
mrmattandmrchay well you should know more about that I guess...lol I am clueless
SwordSweeper127 the reason is that if the firefighters want to go to a floor and they see fire they can immediately go to another floor sometimes they have an emergency stop button. The reason for the doors is so that when a firefighter gets to a floor to look for fire he doesn't want them open for like 2 minutes and so if there is fire he can immediately close it and drop down
Shouldn't be playing with some thing you don't know about...
The car should stop with the doors staying shut then return to the ground floor (if that is the designated floor) and then switch over to car preference control.
Key switch not a button
1st Off, The Fire service is just a switch not a key switch, 2 You need to operate by Inserting a key in and turn it to on, This will Recall the elevator, Turn the key to on in the car, Then Select the floor and close until the door closes Completely, If you made a mistake on a floor turn the elevator FS Off Or press the Call Cancel Button, If you are in the floor, Press the open until it complete fully, If you want to disable it you must turn the elevator to bypass and turn it off, Same for the floor level.
ehhheheheee😁 the 4 lovez you matt 😆 and u got stuck multiple timez 😁 wtf i think now tge elevators test you or at least take a look what u can stand 😆
Faulty controller much?
Good video though
Stupid GAL doors they never work as intended
9:30 ELEVATOR STOPS!
Boi
Needs fixture all those elevator, what purpose cease up to the stuck operating for elevators at all times! That's not good enough elevators improvement test isn't.
amateur hour !!!!!!!!!!!!!!
C
polish language
It's called fireman service phase 2. You Cleary don't know how to operate it
Um, in the UK there is no Phase 2. You clearly don't know that.
@Nice_Choices
No, it isn't. in the UK, the switch that is triggered outside should do all the work.
Look at some of Beno's videos for examples he films Lifts in the UK
Ll