I've been making aircraft models for about 20 years, but have only recently decided to upgrade to an airbrush. I've learned a lot from your videos - thank you!
I use my shop compressor with an 8 gallon tank. All I needed were 1/4 inch to 1/4 inch male adapter, a water trap and another adapter 1/4 inch to 1/8 inch so I can use my quick connector for my two airbrushes. I have a cheapo HF (Chinese) airbrush which I use for lacquer based paints and a Badger 155 Anthem which I use for acrylic based paints. With that 8 gallon tank I get no pulsating air at all. I bet all that paint behind you cost a fortune!
I love those cheap airbrushes. I always keep a few on hand for doing things like priming with Mr. Surfacer or spraying Future because I don't really like spraying those through the same brushes I do my primary painting with. A really good tip I have for those $10-20 eBay airbrushes, because the needles can sometimes be pretty badly made. Is take a cotton swab, put some Tamiya polishing compound (or any compound I suppose) on it and give the needle a polish every once and while. After doing that four or five times you can drastically improve the quality of the spray. Another good tip is replacing the cheap rubber seal with some natural bees wax which is more resistant to more aggressive solvents. The TH-camr Scale-a-ton has a video demonstrating these techniques for improving cheap airbrushes.
I've watched a lot of videos about airbrushes for beginners and this one is the best I've seen -- more information explained very clearly with no extraneous talk, answered all the questions I'd have and made a recommendation for both a cheap first time option and the next more expensive follow on option. Thanks for the great video! My only critique/suggestion would be to work on the titles and thumbnails... Neither helped me realize this part 1 is about choosing an airbrush and compressor versus whatever parts 2 and 3 are about, and I think you would be better served using a picture of all the different airbrushes (like at 13:32) as your thumbnail instead of your face mid sentence. I think that would help people find your great content easier!
Cheap Versus Expensive Years ago and after I graduated from a College Votech School, and was employed as a repair technician in the Air-Conditioning, Refrigeration, and Appliance field, I soon learned that with the exception of a few manufacturers, such as “GE”, “Speed Queen”, “Amana”, “RCA Whirlpool” etc., the majority of the appliances (whether household or commercial), were manufactured by only a couple of major manufacturers, or manufacturing firms. However, both major, (and a few small), business corporations like “Sears” (“Kenmore”, “Lady Kenmore”) , “Montgomery Ward’s”( Airline”, “Ward’s”, “Ward”, etc.), “JC Penny’s”, all paid the manufacture so much a year to have their specific brand name (along with all of the same names stamped upon the data plates) installed upon those appliances. Not all, but, most appliances nowadays are produced by “Amana” located in the “Amana Colonies” in “Amana”, Iowa. I also know of other manufactured products like that, such as the RV’s and Motorhomes known as “Champion” (also used the name “Concord” ), “Kit” (Travel Trailers, Campers, and Mobile Homes), did the same thing in using other brand names installed upon those same RV’s as well, even though they rolled off the same assembly line. So, from the looks of the different designs (which seem to be almost copy-cats of the exact same item), as well as the parts installed upon those hobby air compressors, and a lot of the airbrushes (I see listed online, or in different video’s), they are more than likely (more probably), the same compressor, and airbrushes, being manufactured upon the same assembly line by the same manufacturer but with different specific “brand” name plates and/or data plates being attached to them. The quality (either good or bad), will be determined by both the quality control inspectors upon those assembly lines at the manufacturer, Where they are manufactured (China, America, Canada, Germany, Switzerland, Mexico etc.), as well as by how much a specific customer wants to pay the manufacturer for their particular brand named item and the quality of all individual parts going into that particular item being produced upon that same assembly line by the same manufacturer, or manufacturing firm. So, due to that being the case, more than likely with the exception of a few cases (due to lack of proper consistent “Quality Control”), no matter which brand you purchase (buy), it will still perform satisfactory for many years if properly maintained and used. But, however, I’m not going to refute the old adage of “You get what you pay for”, because it is also a known fact that even the most expensive items will either not live up to their reputation, and/or will fail (sometimes right immediately after purchased). All I’m trying to say is that in most cases, even the most inexpensive (cheapest), item will generally perform satisfactorily, and could (or will), possibly last a lifetime with proper use and maintenance. But once again, (either beginner, or professional), it all boils down to; “To Each His (or her), Own Choice”, and, what they can afford, at the time of purchase. No item, no matter how cheap, or how expensive, is either “all good”, or “all bad”. So don't let others dictate to you, and try to tell you any different. Just take into count all aspects, and then make your own decision. But, no matter what, it will still depend (and be based), upon what's in your wallet, and what you can afford at the time.
Many thanks for an excellent tutorial for a complete beginner like myself wondering how to make a start. Some really great tips here so thanks millions
A good alternative to a comp/tank set up is a compressor with an auto shutoff. I love my Badger TC909. It only runs on demand and is super quiet. Love it!
Yeah, I use a Craftsman 1.5 hp compressor with a 3-gallon tank. It's loud, which is not an issue for me. It's reasonably priced at around a hundred bucks. And I use it both to run my airbrush, and to run air tools in my workshop. Harbor Freight also sells some decent small compressors with tanks, for less than a hundred bucks.
Good advice Bob I have an airbrush the middle of the range one but have not used it yet I will wait for your other videos for advice ( good video) thanks
Great stuff! - Some actual good advice with recommendations! Suggestion: actually buying a beginners airbrush setup and taking us through the tutorials with what we would buy!
Hello! I really like your videos with tutorials and instructions. I have a question, how do you solve the issue of electrostatics when painting with an airbrush? How do you prevent dust from sticking to the model? Do you have any video about it? Hola! me gustan mucho tus videos con tutoriales e instructivos. tengo una pregunta, como resuelves el tema de la electrostática al pintar con aerografo?, como evitas que el polvo se pegue en el modelo?, tienes algún video al respecto?
I have a compressor with the regulator attached on the compressor. Do I need to get another regulator to run the setup in the video? Or do I detach the regulator from the compressor? If so how would I go about doing that?
Someone gave me one of those Testors compressors, basically just a black box without a tank. It's loud af and doesn't stop until you flip the switch. Definitely saving up for a tanked compressor.
Good series. I get questions from people all the time, so there is a need for this type tutorials. Thanks for that. Yo0u had mentioned awhile back that you would put in one of your vieos what the tripod is that you use on your right side to hold your camera. I could still use that name. Regards, Solomon
There a hobby store chain here in America called Hobby Lobby, they have a special online coupon that can save you 40% off any one item a day. So thought was buy a compressor one day and a airbrush another. Not really sure if they are any cheaper for the models online. I haven't gotten around to looking yet.
Keep in mind the bigger compressors you buy for around the house work usely take oil you will need to filter it out. I have a Thomas twin piston used usely for airatio of water works. Rated contuniust run i'm convertin it to an airbrush compressor.
Looking at the Veda brand on another site, claim that the original nanufacturer of Vida has lost the right to the name. Therefore, likely that the brand will not be as good as orevious. Any thoughts on this?
Bobby I’ve got a switzer as186 compressor with a 2.5l tank. I e been looking at the iwata powered pro or the sparmax TC-620x or the TC 610H I know they cost a lot but saving up for. Are they ok and any good as I’m still learning and new. Many thanks Steve. Ps sorry if I’ve asked you this before but I’ve had 2 small strokes and memory is affected
Hi there I have an airbrush similar to yours. When I push down on the trigger button it sprays paint instantly instead of pushing down and activating the spray as I pull back gradually The more you pull back the more paint sprays out Is that supposed to happen? REGARDS RICHARD
This sounds weird. If paint comes out as soon as you depress trigger, then I would say you have a single action airbrush, not a double-action. Conversely, It is perfectly normal for a double-action airbrush to eject more paint when trigger is progressively pulled backwards...
Nice vid, as usual from your channel. I would have loved to hear about a second type of compressor, not driven by pistons but using another kind of technology, apparently extremely quiet, thus ideal to be used indoor. Can't remember of it, unfortunately, so if you could enlight us, that would be great 👍😉
@@ian1352 have been watching lots of videos recently, especially about do-it-yourself air-tank compressors made from old refrigerator motor heads, and have to rectify my previous comment. Those are particularly silent not because of a different technology, the compressor head is encased in a tank and submerged in oil. This possibly makes them particularly silent, despite being themselves piston-driven compressors. Pity that buying one of those for modelling (see the "Bambi" model f.i.) would horribly squeeze your wallet, costing even 3x the "noisy" ones. But for indoor use they would be a paradise. Honestly, if I had time & skills, I would do it myself like those people show in their DIY vids here on yt. That would be fun, and much much cheaper...
Hello! I´m changing my old compressor for a new one with 9 liters tank. Frst time with tanks! I have a doubt, ¿the tank must be empty always after use, for safety?. Regards and thanks for the awesome videos.
nope you can leave air in the tank it won't hurt anything, and if something does happen the tanks almost always have pressure relief valves so they won't blow up or anything crazy like that
Indeed, it is advisable to empty the tank after each use, and reason n. 1 is moisture that condenses in the tank as a consequence of compression. This would cause internal corrosion over time. Now, a 9 liter tank is still a reasonable small volume, so emptying at end is a doable on a daily bases. Good luck!
Heya, great video's first off, not only this one but i'm a big fan of all the build video's too.. they're very helpfull. I do have a question though; i haven't been modelling for a while and want to get back into it, so far i've been looking at airbrushes and compressors and found some from fengda, do you have any experience with the brand? Should i keep looking or are they good? Reason i ask this is because the website i usually get my stuff from seems to be selling these the most and i haven't been able to find a website wich supports another brand like they do with fengda (replacement parts etc), the airbrush i've seen comes with 0,2 and 0,3 nozzles and needles and the compressor works with 4 bars and has a 3 Liter tank. Thanks in advance
Just saying you don't need to spend 100 quid on an airbrush, you can buy a decent complete kit with airbrush and compressor for around 75 pounds, a good website to look on is everything airbrush
as long as you got the adaptors to come down to our little airbrushes it should be fine, but just check the psi is not to high for the hoses. will add this to Q&A
Hey! Thanks for the Tutorial. I learnt a lot. I just have one question considering airbrushes. Ive got my mind set on buying an Aztec a470. Instead of needles they have the interchangeable spray Nozzles wich I think could be less fiddely than changing the delicate needles of the ones you mentioned. I also didn't hear you saying the name "Aztec" either, wich make me wonder if theres maybe a flaw in them that i don't know of yet, or did you just forgot to mention them? Here's a little link on the Aztec airbrushes. www.rlm.at/cont/thema01_e.htm Thanks, kind regards, Martin
Detesto estos canales con intros super ruidosos, y que cuando ya entran A lo que importa apenas y se escucha la voz, aprendan a equilibrar el audio, lo que sea que hayas dicho, ya no me interesa...
I've been making aircraft models for about 20 years, but have only recently decided to upgrade to an airbrush. I've learned a lot from your videos - thank you!
Glad I could help!
Thank you...it was hard to hear you at first because of the loud music...lol
I use my shop compressor with an 8 gallon tank. All I needed were 1/4 inch to 1/4 inch male adapter, a water trap and another adapter 1/4 inch to 1/8 inch so I can use my quick connector for my two airbrushes. I have a cheapo HF (Chinese) airbrush which I use for lacquer based paints and a Badger 155 Anthem which I use for acrylic based paints. With that 8 gallon tank I get no pulsating air at all. I bet all that paint behind you cost a fortune!
I love those cheap airbrushes. I always keep a few on hand for doing things like priming with Mr. Surfacer or spraying Future because I don't really like spraying those through the same brushes I do my primary painting with.
A really good tip I have for those $10-20 eBay airbrushes, because the needles can sometimes be pretty badly made. Is take a cotton swab, put some Tamiya polishing compound (or any compound I suppose) on it and give the needle a polish every once and while. After doing that four or five times you can drastically improve the quality of the spray. Another good tip is replacing the cheap rubber seal with some natural bees wax which is more resistant to more aggressive solvents. The TH-camr Scale-a-ton has a video demonstrating these techniques for improving cheap airbrushes.
I've watched a lot of videos about airbrushes for beginners and this one is the best I've seen -- more information explained very clearly with no extraneous talk, answered all the questions I'd have and made a recommendation for both a cheap first time option and the next more expensive follow on option. Thanks for the great video!
My only critique/suggestion would be to work on the titles and thumbnails... Neither helped me realize this part 1 is about choosing an airbrush and compressor versus whatever parts 2 and 3 are about, and I think you would be better served using a picture of all the different airbrushes (like at 13:32) as your thumbnail instead of your face mid sentence. I think that would help people find your great content easier!
Cheap Versus Expensive
Years ago and after I graduated from a College Votech School, and was employed as a repair technician in the Air-Conditioning, Refrigeration, and Appliance field, I soon learned that with the exception of a few manufacturers, such as “GE”, “Speed Queen”, “Amana”, “RCA Whirlpool” etc., the majority of the appliances (whether household or commercial), were manufactured by only a couple of major manufacturers, or manufacturing firms. However, both major, (and a few small), business corporations like “Sears” (“Kenmore”, “Lady Kenmore”) , “Montgomery Ward’s”( Airline”, “Ward’s”, “Ward”, etc.), “JC Penny’s”, all paid the manufacture so much a year to have their specific brand name (along with all of the same names stamped upon the data plates) installed upon those appliances. Not all, but, most appliances nowadays are produced by “Amana” located in the “Amana Colonies” in “Amana”, Iowa. I also know of other manufactured products like that, such as the RV’s and Motorhomes known as “Champion” (also used the name “Concord” ), “Kit” (Travel Trailers, Campers, and Mobile Homes), did the same thing in using other brand names installed upon those same RV’s as well, even though they rolled off the same assembly line. So, from the looks of the different designs (which seem to be almost copy-cats of the exact same item), as well as the parts installed upon those hobby air compressors, and a lot of the airbrushes (I see listed online, or in different video’s), they are more than likely (more probably), the same compressor, and airbrushes, being manufactured upon the same assembly line by the same manufacturer but with different specific “brand” name plates and/or data plates being attached to them. The quality (either good or bad), will be determined by both the quality control inspectors upon those assembly lines at the manufacturer, Where they are manufactured (China, America, Canada, Germany, Switzerland, Mexico etc.), as well as by how much a specific customer wants to pay the manufacturer for their particular brand named item and the quality of all individual parts going into that particular item being produced upon that same assembly line by the same manufacturer, or manufacturing firm. So, due to that being the case, more than likely with the exception of a few cases (due to lack of proper consistent “Quality Control”), no matter which brand you purchase (buy), it will still perform satisfactory for many years if properly maintained and used. But, however, I’m not going to refute the old adage of “You get what you pay for”, because it is also a known fact that even the most expensive items will either not live up to their reputation, and/or will fail (sometimes right immediately after purchased). All I’m trying to say is that in most cases, even the most inexpensive (cheapest), item will generally perform satisfactorily, and could (or will), possibly last a lifetime with proper use and maintenance. But once again, (either beginner, or professional), it all boils down to; “To Each His (or her), Own Choice”, and, what they can afford, at the time of purchase. No item, no matter how cheap, or how expensive, is either “all good”, or “all bad”. So don't let others dictate to you, and try to tell you any different. Just take into count all aspects, and then make your own decision. But, no matter what, it will still depend (and be based), upon what's in your wallet, and what you can afford at the time.
Many thanks for an excellent tutorial for a complete beginner like myself wondering how to make a start. Some really great tips here so thanks millions
Brilliant video series. Thank you for taking the time to make these for others to learn. Much appreciated !
A good alternative to a comp/tank set up is a compressor with an auto shutoff. I love my Badger TC909. It only runs on demand and is super quiet. Love it!
Yeah, I use a Craftsman 1.5 hp compressor with a 3-gallon tank. It's loud, which is not an issue for me. It's reasonably priced at around a hundred bucks. And I use it both to run my airbrush, and to run air tools in my workshop. Harbor Freight also sells some decent small compressors with tanks, for less than a hundred bucks.
How did you fix the normal airbrush with that
@@JASHVEER22 also get a small water trap, and enough male/female quick disconnect fittings to hook everything up.
@@sabotup7442 thanks man. I'm still ongoing with this project.
@@JASHVEER22 no worries my friend-I like to take my time and hopefully produce a better model. 😎👍🏻
Good advice Bob I have an airbrush the middle of the range one but have not used it yet I will wait for your other videos for advice ( good video) thanks
Great stuff! - Some actual good advice with recommendations!
Suggestion: actually buying a beginners airbrush setup and taking us through the tutorials with what we would buy!
awesome video thank you for taking the time to make it. I know nothing about airbrushing so for being a beginner you explained it plain and simple.
Good info and useful tips. Good explanation of the differences and advantages of single and double stage airbrushes.
Were did u buy your compressor from do sparmax do one like yours but abit cheaper
Really good video, clear and easy to understand and didn't feel like an advertising vid like s log of vids I have watched.
Hello! I really like your videos with tutorials and instructions. I have a question, how do you solve the issue of electrostatics when painting with an airbrush? How do you prevent dust from sticking to the model? Do you have any video about it?
Hola! me gustan mucho tus videos con tutoriales e instructivos. tengo una pregunta, como resuelves el tema de la electrostática al pintar con aerografo?, como evitas que el polvo se pegue en el modelo?, tienes algún video al respecto?
I have a compressor with the regulator attached on the compressor. Do I need to get another regulator to run the setup in the video? Or do I detach the regulator from the compressor? If so how would I go about doing that?
Someone gave me one of those Testors compressors, basically just a black box without a tank. It's loud af and doesn't stop until you flip the switch. Definitely saving up for a tanked compressor.
My tankless compressor works fine, but the tank ones are superior I agree.
So which airbrush do you recommend for beginners? I can't find the Airbeush shown in the Video..
Good series. I get questions from people all the time, so there is a need for this type tutorials. Thanks for that. Yo0u had mentioned awhile back that you would put in one of your vieos what the tripod is that you use on your right side to hold your camera. I could still use that name. Regards, Solomon
There a hobby store chain here in America called Hobby Lobby, they have a special online coupon that can save you 40% off any one item a day. So thought was buy a compressor one day and a airbrush another. Not really sure if they are any cheaper for the models online. I haven't gotten around to looking yet.
Thanks Bobby. Just what I needed to know.
Keep in mind the bigger compressors you buy for around the house work usely take oil you will need to filter it out. I have a Thomas twin piston used usely for airatio of water works. Rated contuniust run i'm convertin it to an airbrush compressor.
Looking at the Veda brand on another site, claim that the original nanufacturer of Vida has lost the right to the name. Therefore, likely that the brand will not be as good as orevious. Any thoughts on this?
Really helpful. Thanks!
Glad it was helpful!
Bobby I’ve got a switzer as186 compressor with a 2.5l tank. I e been looking at the iwata powered pro or the sparmax TC-620x or the TC 610H I know they cost a lot but saving up for. Are they ok and any good as I’m still learning and new. Many thanks Steve.
Ps sorry if I’ve asked you this before but I’ve had 2 small strokes and memory is affected
I have a sparmax and has been a good brand to by and tend to be cheaper than iwata, golden rule always get one with a tank
Hi
Is it necessary to have a tank with the compressor or just a a single/dual piston compressor is fine to work with ??
always best to have a tank with the compressor mate
Great video. looking forward for part 2 & 3
Hi there
I have an airbrush similar to yours. When I push down on the trigger button it sprays paint instantly instead of pushing down and activating the spray as I pull back gradually The more you pull back the more paint sprays out Is that supposed to happen?
REGARDS RICHARD
This sounds weird. If paint comes out as soon as you depress trigger, then I would say you have a single action airbrush, not a double-action. Conversely, It is perfectly normal for a double-action airbrush to eject more paint when trigger is progressively pulled backwards...
Hi . How much pressure do you use ? Is it always the same or does it vary ? Thanks
Nice vid, as usual from your channel. I would have loved to hear about a second type of compressor, not driven by pistons but using another kind of technology, apparently extremely quiet, thus ideal to be used indoor. Can't remember of it, unfortunately, so if you could enlight us, that would be great 👍😉
There are belt driven ones, but they're usually big as far as I know.
@@ian1352 have been watching lots of videos recently, especially about do-it-yourself air-tank compressors made from old refrigerator motor heads, and have to rectify my previous comment. Those are particularly silent not because of a different technology, the compressor head is encased in a tank and submerged in oil. This possibly makes them particularly silent, despite being themselves piston-driven compressors. Pity that buying one of those for modelling (see the "Bambi" model f.i.) would horribly squeeze your wallet, costing even 3x the "noisy" ones. But for indoor use they would be a paradise. Honestly, if I had time & skills, I would do it myself like those people show in their DIY vids here on yt. That would be fun, and much much cheaper...
Great videos loved all three and have learned a lot. Thank you.
Hello! I´m changing my old compressor for a new one with 9 liters tank. Frst time with tanks! I have a doubt, ¿the tank must be empty always after use, for safety?. Regards and thanks for the awesome videos.
nope you can leave air in the tank it won't hurt anything, and if something does happen the tanks almost always have pressure relief valves so they won't blow up or anything crazy like that
Indeed, it is advisable to empty the tank after each use, and reason n. 1 is moisture that condenses in the tank as a consequence of compression. This would cause internal corrosion over time. Now, a 9 liter tank is still a reasonable small volume, so emptying at end is a doable on a daily bases. Good luck!
Been watching your vids and a lot of help and advice
Heya, great video's first off, not only this one but i'm a big fan of all the build video's too.. they're very helpfull. I do have a question though; i haven't been modelling for a while and want to get back into it, so far i've been looking at airbrushes and compressors and found some from fengda, do you have any experience with the brand? Should i keep looking or are they good? Reason i ask this is because the website i usually get my stuff from seems to be selling these the most and i haven't been able to find a website wich supports another brand like they do with fengda (replacement parts etc), the airbrush i've seen comes with 0,2 and 0,3 nozzles and needles and the compressor works with 4 bars and has a 3 Liter tank.
Thanks in advance
...all I heard was "it costs a lot of money", how much do you think 40k costs!!!!
Would the iwata sprint jet compressor be worth getting? As I can get hold of one off of a mate at work for £90. Any advice would be great. Thanks.
I have an industrial compressor that can do 120psi, would that be too much for an airbrush?
Around 15 PSI for most airbrushes-120 will blow paint out like dust and blow the Seals out of your brush.
Ordered a Temptu SP-35 and a generic eBay compressor. Think it will do?
i use mainly those cheap airbrushe's, if you put some time and a little bit of money in them you can make them prety good! fopr not alot of money
Great video very interesting and informative for a beginner like me
Is it necessary to have more than one airbrush?
Just saying you don't need to spend 100 quid on an airbrush, you can buy a decent complete kit with airbrush and compressor for around 75 pounds, a good website to look on is everything airbrush
I saw some sparmax compressor on Amazon for €185!
good video Body, looking forward to the others
Awesome video man, thanks for sharing...
tnxs very helfull video!i am new in the hobby and some of your videos are great tnxs again keep up the good work!!!!!greetings from greece!
Great video sir ! What would you consider the best all round needle and nozzle size ?
SMS kustoms i get on well with the 0.4 for almost all tasks
well done very informative and helpful. thank you.
super.. good info for me...GL.
Hi, where can I buy the quick release couplings??
Simon Allen I bought my hose and quit disconnect on Amazon. Also got my duel action airbrush there.
Porsche make airbrushes?
my airbrush always spits out paint and isn't consistent with the paint flow and most of the time barely anything comes out... any ideas to fix this?
Brian 4 8 times out of 10 it normally means ur airbrush needs cleaning.. u will see that in part 3
Brian 4 either you are not cleaning your airbrush thoroughly, or you paint is not thin enough. Maybe both
What about my 80 gallon industrial shop compressor
as long as you got the adaptors to come down to our little airbrushes it should be fine, but just check the psi is not to high for the hoses. will add this to Q&A
@@genessismodels thanks for the reply! And I will look into thanks
Hey! Thanks for the Tutorial. I learnt a lot.
I just have one question considering airbrushes. Ive got my mind set on buying an Aztec a470. Instead of needles they have the interchangeable spray Nozzles wich I think could be less fiddely than changing the delicate needles of the ones you mentioned.
I also didn't hear you saying the name "Aztec" either, wich make me wonder if theres maybe a flaw in them that i don't know of yet, or did you just forgot to mention them? Here's a little link on the Aztec airbrushes.
www.rlm.at/cont/thema01_e.htm
Thanks,
kind regards,
Martin
Thanks.
I got Spray Air Brush Set Tattoo Nail Art New 3 Airbrush & Compressor Kit Dual-Action
What is the name of that cheap airbrush?
Veda. They can be found on EBay for $52.00 USD for a dual action gravity feed
Please loose the music
Detesto estos canales con intros super ruidosos, y que cuando ya entran A lo que importa apenas y se escucha la voz, aprendan a equilibrar el audio, lo que sea que hayas dicho, ya no me interesa...