Thanks for recording and posting this, also thanks for posting where you found a replacement booster! I've got a 1975 ford F600 that was a uhaul special in one of its past lives that I'm putting back into service and even tho my brakes worked I still insisted we replace everything in the brake system before I go barrelling down the road with 18,998lbs of stuff.
NO NO NO do not use heater hose instead of vacuum hose. Heater hose will not stand up to fuel. As the vacuum hose is connected to the intake manifold there will be some fuel vapors on occasion. ALSO you need a good vacuum hose that will not collapse when the vacuum is in it for prolonged periods. This system is not like brakes today. When you lose em you lose all 4 wheels at the same time. Remember heater hose is designed to take pressure from the inside. Vacuum must do just the opposite. I'm sure you know but a check valve in the vacuum line as close to the manifold as possible will help keep gas fumes out of that line. Otherwise Great Job! love to see these older rigs rolling on the road.
put one on my f600-1969, went thru whole system, still weak brakes. i hear the vaccum booster vent on startup, it stops sucking when i press brake pedal. have a strong- hard pedal with weak brakes.??????
Where did u get the replacement I tried to find where u posted or said where u got it but I can’t find it I’m needing one for my international dump truck
@@simaverick1972 the exact one i ordered for my truck is gone now, but they have other versions that could work. www.amazon.com/gp/aw/d/B000HSC9CW/ref=psdcmw_15722551_t1_B000HSC9MW
think this model never arrived in brazil. what a shame, I would love to restore one of this. I have a F350 1968 brazilian Ford, in US it´s a 50s model.
@@PappProductions yes it was an original V8, but gasoline in the past raised to much, so nearly all owners swapped to diesel. mine have a 6 cyl mercedes 5.1l pos WWII indirect injction engine. OM321. It´s great. Simple.love it. And it´s really nice. Doing metal and paint job. Will be chocolate brown. I´m thinking in painting even the box, like the vintage ones.
@@oliverroedel1111 its cool your still running the old ford you have! I want to make more videos of the N600 im trying to find a used flatbed to slap on it
Thanks for recording and posting this, also thanks for posting where you found a replacement booster!
I've got a 1975 ford F600 that was a uhaul special in one of its past lives that I'm putting back into service and even tho my brakes worked I still insisted we replace everything in the brake system before I go barrelling down the road with 18,998lbs of stuff.
No problem! I dont blame you for going through the brake system. Your truck is going to be real fun putting it to work!
NO NO NO do not use heater hose instead of vacuum hose. Heater hose will not stand up to fuel. As the vacuum hose is connected to the intake manifold there will be some fuel vapors on occasion. ALSO you need a good vacuum hose that will not collapse when the vacuum is in it for prolonged periods. This system is not like brakes today. When you lose em you lose all 4 wheels at the same time. Remember heater hose is designed to take pressure from the inside. Vacuum must do just the opposite. I'm sure you know but a check valve in the vacuum line as close to the manifold as possible will help keep gas fumes out of that line. Otherwise Great Job! love to see these older rigs rolling on the road.
5spd is a 4 spd low hole,no OD,and i would the rear ratio to be somewhere around 488 or stiffer
Fue magnífico freno pero con el tiempo se agota 💪💪💪💪👏🇨🇴🇨🇴Colombia
So good.
put one on my f600-1969, went thru whole system, still weak brakes. i hear the vaccum booster vent on startup, it stops sucking when i press brake pedal. have a strong- hard pedal with weak brakes.??????
Where did u get the replacement I tried to find where u posted or said where u got it but I can’t find it I’m needing one for my international dump truck
Can you please make some cold starts of all your carbureted trucks with that interior view? Would be so cool to see
roger that I try to get some out soon!
@@PappProductions can’t wait!
Any plans for a bed for that truck? I’m currently looking at a similar one and found your video.
*Thanks, Jon*
I looking for a used 8x12 or 8x14 flat bed to throw on it
When you have the weight of a bed on it, the brakes won't lock up so much.
Did you sell this truck
they make extensions for them
I need one of those where'd you find that at? Do you have a part #
Oddly enough I found it on amazon
I could not find one anywhere else
A1 Cardone 51-8047 Remanufactured Hydro-Vac Power Brake Booster
@@PappProductions just my luck, I looked on Amazon and it says currently unavailable. At least I have a part number now, thanks
@@nickdyess581 good luck on your search! Sorry man
@@PappProductions I called O'Reilly today and they said they can order it, so we'll see
@@nickdyess581 sweet i hope you luck out! It is a tough part to find
Need to learn how to change gears. Ain’t no shift pattern I ever seen
Where did you find the replacement?
Of all places i looked and call on the interwebs freakin amazon had it
You happen to have a link? Searching for one now for my 65 F600.
@@simaverick1972 the exact one i ordered for my truck is gone now, but they have other versions that could work. www.amazon.com/gp/aw/d/B000HSC9CW/ref=psdcmw_15722551_t1_B000HSC9MW
@@PappProductions wow!!
@@PappProductions anyone tried this part to see if it works?
Shift pattern must be different
think this model never arrived in brazil. what a shame, I would love to restore one of this. I have a F350 1968 brazilian Ford, in US it´s a 50s model.
Yalls Brazil Fords are wicked cool! Ive seen some on the world wide web. Really cool fords down there. I bet your truck is sweet!
@@PappProductions yes it was an original V8, but gasoline in the past raised to much, so nearly all owners swapped to diesel. mine have a 6 cyl mercedes 5.1l pos WWII indirect injction engine. OM321. It´s great. Simple.love it. And it´s really nice. Doing metal and paint job. Will be chocolate brown. I´m thinking in painting even the box, like the vintage ones.
@@oliverroedel1111 that sounds cool bet it just sips fuel and sounds good too
@@PappProductions he had a direct pipe hahaha but I changed it. Hope you make more vids about your truck, it´s really cool.
@@oliverroedel1111 its cool your still running the old ford you have! I want to make more videos of the N600 im trying to find a used flatbed to slap on it