How to Remove Intake Cover 11-19 Ford Explorer

In the video, 1A Auto shows how to replace a cracked or broken intake cover. The video is applicable to the 11, 12, 13, 14, 15, 16, 17, 18, 19 Ford Explorer
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oT5/1AX...
• 10mm Socket 1aau.to/oFt/1AX...
• 8mm Socket 1aau.to/oFt/1AX...
• Trim Tool Set 1aau.to/ojc/1AX...
• Vacuum
• Torque Wrench 1aau.to/ooF/1AX...
• Brake Parts Cleaner
• Paper Towels 1aau.to/oeV/1AX...
• Pick 1aau.to/oe7/1AX...
For More Info visit us at 1aau.to/h/aBp/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*

[@jamestverde]

Really great video. Very thorough including torque spec and order. Thank you.

[@1AAuto]

+J Green Thanks for the feedback!

[@j.a.s7571]

Thanks for the video. I’ll be replacing mine very soon. Gives me a look at what I’ll need and what I’ll be running into.

[@1AAuto]

+Jorge Soto Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@troyfostonjr8890]

Thanks, just removed my intake with your assistance. I couldn't find the bolt at the bottom.

[@antonioalvares7486]

I wish you had a video on the lower gasket too 😂😂 but over all awesome video very thorough 💯💯

[@samlu2943]

Hi, Thanks for the video. do you have video of how to remove the lower intake manifold? as we know the 5th generation has L4 and v6 engines, are they using the same lower intake manifold?

[@coastlinecruiser8429]

I loosened my bolts because I was going to take it off last night but put it back together and never torqued the bolts to the intake, did I screw anything up?

[@c.control9951]

89"/lbs. broke 4 of my intake manifold bolts. Thanks!

[@keep1treal61]

Where’s the AC pressure switch located? Been trying to find it on this vehicle. Thanks

[@8888UDIT]

when i took mine off to replace the spark plugs, noticed there was little trace of oil found on the gasket and the inside plenum, should i be worried ?

[@cpalma2012]

Can you provide the gasket part number you replaced?

[@BelongToTheWrld]

i want to take the cover off my intake on my 2017 honda accord sport would that damage the car in anyway if i just leave it off

[@1AAuto]

+i quit Thanks for watching! That engine cover is mainly there for cosmetic purposes, so it should not damage the vehicle if you remove it.

[@tristenwalters3506]

What do you do when you break one of the studs to hold down the coil pack?

[@daviddipasquale586]

You cry

[@russell9735]

Whats rhe bolt size for the bolts that hold the cover down in place?

[@1AAuto]

+Russell Hatake We do not have the size of the bolts available but this repair requires an 8mm and 10mm socket wrench.

[@wesleypeckham3388]

Can I please get the link for those hose clamp pliers?

[@1AAuto]

+Wesley Peckham Thanks for watching! We currently do not carry those hose clamp pliers.

[@Kolonol1]

The 2014 I'm looking at looks nothing like this one...it has an aluminum intake manifold

[@drockballa]

where is the map sensor