Thank you Medic , for puting on this great video , for all of us still waiting on there Rey 2.0.. So appreciate it... and to have a race guyat the wheel ... outstanding.. 👍 Ty again for this .. Cheers 🥂 great job my friend..🖖 Tc everyone and stay an RC on !!!
That truck is so smooth especially the suspension built Losi Racing did on it! Such very satisfying to watch it runs around the track. And the jumps are just a beauty~ it looks very realistic around the track as well too~
If I got one I’d put a set of paddle tires on the rear and be at the beach all day. 8S and paddles I wouldn’t be surprised if it pulled wheelies like my old HPI Baja.
Thanks you Medic for keeping us entertained👍👍🤜🤛 Larry did excellent out there! What a well performing machine. Enjoying all if the videos on the SBR 2.0🔥🔥👊👊
Love the videos keep them coming . We need these in today's times. My wife and love the channel and we are saving up for a super baja ray. So we can get out and enjoy the hobby together.
Honest opinion on the 1/10 Baja Rey I'm stuck between either the Baja Rey black rhino or mint 400 Baja Rey edition my wife's trying to figure out which one to buy
I was so fortunate to have Larry be at the track and volunteer to drive the truck so I could film it for you guys !! I agree.. it had to be seen on track
RCSparks Studio makes for even better video when you can focus solely on the filming and you have someone else for the driving! Keep up the great content 👍
Yup I have to agree , they seem a little front end heavy ... been thinking of adding a tape on mag wheel wieght (S) in the fuel cell at the rear as it dose come apart just for that reason I'm sure ... and that far back it might only take An Oz. or two or less . This might get it to touch down more to the rear than always Nose diving... 🙄 😎 TC and RC on!!
@@sammym.belfastchild i am quite a fan of tamiya and adding counter weights is very normal as depending on the setup and terrain say rally that is mostly tarmac the you would if it is tt-02 then you would want a central weight balance if it was mostly dirt or gravel then you want a more frontal weight balance and if its a lot of straights on most terrains then you want a more rear weight balance it is more fun when going off road to have an adjustable weight balance not just for jumping but also cornering and affecting how the vehicle puts power down adjustable weight balance is also very useful for rock crawling and rock bouncing and is key in small scale formula off-road though that reminds me i will need to get some weights for both my wraith and my upcoming tt-02 project oh and for trucks like this it may be worthwhile looking into tire based weights that means you wouldn't need to adjust your suspension all that much problem is finding somewhere that sells good ones in the uk since model sport has been trying to get them for years
Love the track video with the short course trucks...It would be cool to get the fellas together for a smaller version of Big Dirty at that track with the SC RC's, like Slashes & whatnot. I still hate seeing you give away all your hard work cuz it makes me wonder about your health, but your response to mine & others questions about it last week, I understand why you're doing it. You're one hell of a man, husband & father...We need more people like you on this planet. God Bless!
If I was dying I would be hoarding money for my family. Take solace, my brother :) please read this post: th-cam.com/users/postUgz-iV31hWXUVIcYGR94AaABCQ?lc=UgwC71_NPfki6FGgakJ4AaABAg
@@TheRealRCSparks That was the post I referred to in my above comment...about others & I were asking about your health but that post helped me understand why you were doing what you were doing. TY tho. Keep on keepin' on!!
Aaron the slow motion shots were very cool brother! And Larry drives great! I know it must of been hard for him not to hammer that trigger on 8S!!!! Loved the track!
I was thinking to myself stiffing the front and soften the rear right as he said he was going to I raced short course and that seemed logical , very cool car for sure !
These trucks are notorious for landing nose heavy, they have a very low CG but the bulk of the weight is forward on the chassis. Suggest adding some tungsten weights to the rear of the cage inside the tires, or some shit like that. Your friend is a great driver, this video is amazing!
Love the blog mate! Losi new trophy truck.. wow.. looks great fun.. i have one on order still have to wait a month tho being in England we get things last boo! Lol never had a trophy before, looks abit harder to control than a X max. But its going to be carnage lol Keep up the good content 👌
It seems like it would be a bit difficult (stock) to get the rear to break loose around turns. Maybe some different shock fluid could help with that and the diving. That is definitely one bad ass truck! And as always thank you for the video. Best hobby ever!
I had my sbr 2 for about 8 months. Have yet to run 8s. Kinda made it a shelf queen I hate to say. Bunch of vitavon parts. It’s just to nice to beat on now that I have a couple grand total invested in the truck and parts. So I just watch other ppl on TH-cam have fun with it.
Hi Medic, nice to see this kind of bashing/review videos. That thing rips. Hope you can upload more vids tunning/upgrading it. JUST bought a Mojave 2 weeks ago 😅
Wow, 8s Power on Race Track. The Short Course Truck fly more then drive in the Parcours. I think for me as trialer to much fast power 😅. Greetz Andy from Modellbau-Kanal.de 🇩🇪
It looks really good on the track, the way it tracks and soaks the bumps. The track looks very small for this size of vehicle, I assume it is a 1/10 or a 1/8 course. It would be great if they start to race stuff like this, I think it would be a great show.
For that track, I would most certainly tune it for 6S or turn down the throttle rate to 75% if staying on 8S. As with all solid axle multi-link trucks, you need to maintain constant throttle during the initial part of the jump to prevent lawn darting.
I bet they are alot of fun, but they don't seem to handle anywhere close to as well as a buggy. I bet the DBXL-E drives like a dream, but you'll probably need a BMX track for it in order for it to shine.
Almost like you are taking a page out of my book putting a solid axle on the track, lol. I'm doing it with the 1/10 Baja Rey and setting it up to compete with the 4x4sct class though! I have videos on my channel of my progress, but the biggest impact I took away from the platform is that its all about rear axle link positions! I haven't seen the Super in person yet, but I can tell you that Losi setup the 1/10 version up with a LOT of pro squat, great for bashing about in rough terrain to soak up bumps and hazards at speed, but not great at all for modern rc track use. It causes the rear end to not lock in as well as it should because its taking away from the contact pressure of the tires when you hit the throttle and it takes away from your suspension travel when launching from jumps. I modified my link positioning (1/4" lower on the chassis side upper axle link) to gain a bit of anti squat and it made a world of difference for the tracks.
Wow, thats a pain button for you.. Lol.. "more realistic"? No.. Electric and Hydrogen is the future. Gas is already dying... and Nitro does not exist here. It died years ago
@@TheRealRCSparks and you say your an enthusiast... lol... and electric is not the future all you battery heads will find that out....😎😎 you always get love and likes from me just Never Say electric is king... it's far from that
@@TheRealRCSparks this monster is a bit above my pay grade, but makes me excited to get my Senton 3s BLX out to a bmx track I found out about, hidden in woods the next town over.
Firstly I like this truck and I see it having a mod following, something I really likes about this segment you did medic, showing the potential of the truck I don’t think it’s completely there, maybe mod to run dual shocks and a progressive springs it needs tuning which is good to, I do think the ubr has more travel on the front arms having more droop which would allow for more progression the weight of the truck to suspensions the trick here, bigger bore ? Twins? ( that’s what she said).
Had a blast driving the Baja Medic, let me know anytime you need a driver again, keep doing what you do
Thanks for putting on a great show Larry!! I know the viewers really enjoyed it.. and so did I!!
Hey man I recently bought a kyosho inferno mp10e kit and I was wondering if for a video you would want to do that as a series or something
Thank you Medic , for puting on this great video , for all of us still waiting on there Rey 2.0..
So appreciate it... and to have a race guyat the wheel ... outstanding.. 👍
Ty again for this ..
Cheers 🥂 great job my friend..🖖
Tc everyone and stay an RC on !!!
Yes being able to feel the truck through the remote is very nice it helps alot. Great vid.
That truck is so smooth especially the suspension built Losi Racing did on it! Such very satisfying to watch it runs around the track. And the jumps are just a beauty~ it looks very realistic around the track as well too~
The scale and realism of that Losi is amazing.
I just wanted to say that I love your videos. I have been learning a lot from your channel since I’m new to the hobby. Stay safe keep it up
If I got one I’d put a set of paddle tires on the rear and be at the beach all day.
8S and paddles I wouldn’t be surprised if it pulled wheelies like my old HPI Baja.
Hi
Even my 1/10 Baja rey just floats the beach, its really amazing
You should pull this thing back out and do a edit for realism and do it like you did the jet boat.
All right Larry, Go Dolphins!
That one jump you put in slo-mo..... AWESOME!!
Too much damn power! Take it to that skate park you all had that jump off years ago. Between high jumps and speed for the culverts. What a machine!!
I own a UDR....but your video has made me decide to get one of these badboys....great video brother....👍👍👍😁✌
It jumps, lands AND rolls like a real short-course truck.....awesome!
I agree that 6S might be better for that track. The 8S is heavier and it didn’t look like you could really use all the 8S power on that track.
Love Larry's hat
The slo mo crashes and jumps were wicked. Many Many horsepowers😁👍
Wow what a beautiful Rig!! It floats so nicely!! Excellent video.
That track limits the full potential of that truck.
I like you being able to critique while someone else drives.
Thanks you Medic for keeping us entertained👍👍🤜🤛 Larry did excellent out there! What a well performing machine. Enjoying all if the videos on the SBR 2.0🔥🔥👊👊
MINI MONSTER ,
MONSTER JUMP
this truck is nuts, looks freaking great in the air.
✌🏻😎🏴ELECTRIC IS THE FUTURE ⚡️⚡️⚡️
It is so Powerful that you really have to learn the Throttle. Wow‼️
Just an awesome truck. Moved to the top of my rc wish list.
Love the videos keep them coming . We need these in today's times. My wife and love the channel and we are saving up for a super baja ray. So we can get out and enjoy the hobby together.
Dude! That thing is CRAZY fast. I mean, it's no Felony or Infraction, lol bit that thing killed it on that track! 💯🤘
By far the best RC VIDEO IVE EVER SEEN THIS ROCKS
Honest opinion on the 1/10 Baja Rey I'm stuck between either the Baja Rey black rhino or mint 400 Baja Rey edition my wife's trying to figure out which one to buy
Ooooh the desert trucks are the sexiest cars on the planet
Awesome to see this rc on a track!! 👍
I was so fortunate to have Larry be at the track and volunteer to drive the truck so I could film it for you guys !! I agree.. it had to be seen on track
RCSparks Studio makes for even better video when you can focus solely on the filming and you have someone else for the driving! Keep up the great content 👍
Man I wish we had a track like this in Wisconsin! Looks like fun!!
Dude... where you from? I'm from Appleton. I have an 8s Mojave EXB and looking to get this.
I'd kill for a place even half this size to run!
Friggin send er bud!
Awesome, love it. I have the yellow Brenthell, it's a BEAST!
SO very happy to see the rc park doing well today, thanks for vid!
Pretty cool man that slight shock adjustment made all the difference
That's the fun and happiness of Rcing ,great video as always but it keeps on getting better and better! #TeamRcSparks rocks 😎😉👍🏻💯
wonderful video brother. awesome air time too. That Losi baja rey is definitely a keeper...💯💯👍👍
It looks so smooth flying in the air
Thanks for the video Aaron and Larry! 👍😁
That truck is the perfect size for that track.
Man I love this beast
Absolutely EPIC Ride!!!! 👌👏👏👏👏👏
Insane air time
This thing is beautiful.
What a awesome truck.
Just watched the video. That truck is super wicked. It seems to have good launch and distance. Gotta go watch some load kings now too.
I can’t wait to have mine
I think the only thing i would do aside from having different tires and rims is add a counter balance either way great work
Yup I have to agree , they seem a little front end heavy ... been thinking of adding a tape on mag wheel wieght (S) in the fuel cell at the rear as it dose come apart just for that reason I'm sure ... and that far back it might only take An Oz. or two or less .
This might get it to touch down more to the rear than always Nose diving... 🙄
😎 TC and RC on!!
@@sammym.belfastchild i am quite a fan of tamiya and adding counter weights is very normal as depending on the setup and terrain say rally that is mostly tarmac the you would if it is tt-02 then you would want a central weight balance if it was mostly dirt or gravel then you want a more frontal weight balance and if its a lot of straights on most terrains then you want a more rear weight balance it is more fun when going off road to have an adjustable weight balance not just for jumping but also cornering and affecting how the vehicle puts power down adjustable weight balance is also very useful for rock crawling and rock bouncing and is key in small scale formula off-road though that reminds me i will need to get some weights for both my wraith and my upcoming tt-02 project oh and for trucks like this it may be worthwhile looking into tire based weights that means you wouldn't need to adjust your suspension all that much problem is finding somewhere that sells good ones in the uk since model sport has been trying to get them for years
Love the track video with the short course trucks...It would be cool to get the fellas together for a smaller version of Big Dirty at that track with the SC RC's, like Slashes & whatnot. I still hate seeing you give away all your hard work cuz it makes me wonder about your health, but your response to mine & others questions about it last week, I understand why you're doing it. You're one hell of a man, husband & father...We need more people like you on this planet. God Bless!
If I was dying I would be hoarding money for my family. Take solace, my brother :) please read this post: th-cam.com/users/postUgz-iV31hWXUVIcYGR94AaABCQ?lc=UgwC71_NPfki6FGgakJ4AaABAg
@@TheRealRCSparks That was the post I referred to in my above comment...about others & I were asking about your health but that post helped me understand why you were doing what you were doing. TY tho. Keep on keepin' on!!
@@ghpjerry Thank you good Sir! I am a fortunate TH-camr to have such great viewers like you .. Kind regards!
That thing is beast.
Hi Dude. Nice video. Awesome jumps.. what a solid model ..
very cool video my friend
😍😍😁👍👍💯💯💯🤜🤛
Aaron the slow motion shots were very cool brother! And Larry drives great! I know it must of been hard for him not to hammer that trigger on 8S!!!! Loved the track!
Great looking rig, little shock tuning and it would be awesome!
Fantastic video im saving for one of these it will be my next truck cant wait 😀 👍
Medic makes a perfect commentator
I was thinking to myself stiffing the front and soften the rear right as he said he was going to I raced short course and that seemed logical , very cool car for sure !
These trucks are notorious for landing nose heavy, they have a very low CG but the bulk of the weight is forward on the chassis. Suggest adding some tungsten weights to the rear of the cage inside the tires, or some shit like that.
Your friend is a great driver, this video is amazing!
I think the two spares pull the arse end round on corners might be worth a try with them off the truck 👍👍👍🐴
Love the blog mate! Losi new trophy truck.. wow.. looks great fun.. i have one on order still have to wait a month tho being in England we get things last boo! Lol never had a trophy before, looks abit harder to control than a X max. But its going to be carnage lol
Keep up the good content 👌
It seems like it would be a bit difficult (stock) to get the rear to break loose around turns. Maybe some different shock fluid could help with that and the diving. That is definitely one bad ass truck! And as always thank you for the video. Best hobby ever!
Damn. I wish I could afford this thing. My daughter would love watching this with a barbie taped to it. Hahaha
The crocodile killer is an awesome truck but I haven’t been to Blackfoot in years! Track looks great, may have to drop 10 bucks and check it out!
I had my sbr 2 for about 8 months. Have yet to run 8s. Kinda made it a shelf queen I hate to say. Bunch of vitavon parts. It’s just to nice to beat on now that I have a couple grand total invested in the truck and parts. So I just watch other ppl on TH-cam have fun with it.
THE FALL GUY, anyone remember that tv series with lee majors,🤣.
Such a cool truck
Ends on a roost!! Nice!
Mind blowing amazing vid as always thanks so much luv u guys stay safe
Awesome video mate , great to see the Losi in a track environment
Glad you enjoyed it
So sweet!!!
what a nice truck
this is a nice Car. 👍
That handles amazing
Nice looking truck.
Awesome truck
I kinda want one of these. Nice share thanks.
Love short course trucks!
That thing rips
No views!! I speak for us all that thing rips!!! Love the losi!!!!
ITS AN AMAZING RIG! Im surpised at how tough it is...!
@@TheRealRCSparks absolutely. Seems like going fast is easy these days...but holding together isn't as important as it used to be.
Hi Medic, nice to see this kind of bashing/review videos. That thing rips. Hope you can upload more vids tunning/upgrading it. JUST bought a Mojave 2 weeks ago 😅
awesome gunna have to come down there and test that track out! only couple hours from me
Love the truck love the vids keep them coming
Love the suspension and wheels
Me too! I think if I change out the oil to something a little thicker, this truck would handle a bit better on this track!
Wow, 8s Power on Race Track. The Short Course Truck fly more then drive in the Parcours. I think for me as trialer to much fast power 😅. Greetz Andy from Modellbau-Kanal.de 🇩🇪
Nice GCM Shirt.. Awesome video too..
Thanks for watching
Yeah king offroad nice
Awesome driver awesome track and truck medic
Great Video
It looks really good on the track, the way it tracks and soaks the bumps. The track looks very small for this size of vehicle, I assume it is a 1/10 or a 1/8 course. It would be great if they start to race stuff like this, I think it would be a great show.
For that track, I would most certainly tune it for 6S or turn down the throttle rate to 75% if staying on 8S. As with all solid axle multi-link trucks, you need to maintain constant throttle during the initial part of the jump to prevent lawn darting.
I bet they are alot of fun, but they don't seem to handle anywhere close to as well as a buggy. I bet the DBXL-E drives like a dream, but you'll probably need a BMX track for it in order for it to shine.
Not much for racing trucks but I like that one
Almost like you are taking a page out of my book putting a solid axle on the track, lol. I'm doing it with the 1/10 Baja Rey and setting it up to compete with the 4x4sct class though! I have videos on my channel of my progress, but the biggest impact I took away from the platform is that its all about rear axle link positions! I haven't seen the Super in person yet, but I can tell you that Losi setup the 1/10 version up with a LOT of pro squat, great for bashing about in rough terrain to soak up bumps and hazards at speed, but not great at all for modern rc track use. It causes the rear end to not lock in as well as it should because its taking away from the contact pressure of the tires when you hit the throttle and it takes away from your suspension travel when launching from jumps. I modified my link positioning (1/4" lower on the chassis side upper axle link) to gain a bit of anti squat and it made a world of difference for the tracks.
NO ELECTRIC HAS NOT AND NEVER WILL TAKE OVER... GAS AND NITRO ARE WAY MORE EXCITING AND REALISTIC.... WOW
Wow, thats a pain button for you.. Lol.. "more realistic"? No.. Electric and Hydrogen is the future. Gas is already dying... and Nitro does not exist here. It died years ago
@@TheRealRCSparks and you say your an enthusiast... lol... and electric is not the future all you battery heads will find that out....😎😎 you always get love and likes from me just Never Say electric is king... it's far from that
@@kenwalters845 Well, you are very passionate about this subject! Enjoy your day :)
2:15 aaaand there is the 1/6th scale moment of : Oops that has more weight than a 1/10th scale XD
Bad ass truck though
These trucks need cameras and vr goggles like drone racing
Thicker shock oil or more restrictive piston. Good call with the lower rear.
Good work ;)
Love these Baja Rey videos. Thing absolutely tears.
Man, I have beat on this truck for days, and everything is still working.. im shocked.. !
@@TheRealRCSparks this monster is a bit above my pay grade, but makes me excited to get my Senton 3s BLX out to a bmx track I found out about, hidden in woods the next town over.
Firstly I like this truck and I see it having a mod following, something I really likes about this segment you did medic, showing the potential of the truck I don’t think it’s completely there, maybe mod to run dual shocks and a progressive springs it needs tuning which is good to, I do think the ubr has more travel on the front arms having more droop which would allow for more progression the weight of the truck to suspensions the trick here, bigger bore ? Twins? ( that’s what she said).