Radiator working, How Radiator Works ? इंजन कूलिंग सिस्टम कैसे काम करता है ? Engine cooling system

In this video I will cover following information:
WHAT IS RADIATOR?
FUNCTION OF RADIATOR
PRINCIPLE OF RADIATOR
PARTS OF RADIATOR
WORKING OF RADIATOR
A engine produces lot of heat when it is running, and must be cooled continuously to avoid engine damage and seizer. Generally this is done by circulating coolant and water mixed with an antifreeze solution through special cooling passages. Some engines are cooled by air flowing over finned cylinder casings. A water-cooled engine block and cylinder head have interconnected coolant channels running through them. At the top of the cylinder head all the channels converge to a single outlet. A water pump, driven by a pulley and belt from the crankshaft, drives hot coolant out of the engine to the radiator, which is a form of heat exchanger. Unwanted heat is passed from the radiator into the air stream, and the cooled liquid then returns to an inlet at the bottom of the block and flows back into the channels again. Usually the pump sends coolant up through the engine and down through the radiator, taking advantage of the fact that hot water expands, becomes lighter and rises above cool water when heated. Its natural tendency is to flow upwards, and the pump assists circulation. The radiator is linked to the engine by rubber hoses, and has a top and bottom tank connected by a core a bank of many fine tubes. The tubes pass through holes in a stack of thin sheet-metal fins, so that the core has a very large surface area and can lose heat rapidly to the cooler air passing through it. On older cars the tubes run vertically, but modern, low-fronted cars have crossflow radiators with tubes that run from side to side. In an engine at its ordinary working temperature, the coolant is only just below normal boiling point. The risk of boiling is avoided by increasing the pressure in the system, which raises the boiling point. The extra pressure is limited by the radiator cap, which has a pressure valve in it. Excessive pressure opens the valve, and coolant flows out through an overflow pipe. In a cooling system of this type there is a continual slight loss of coolant if the engine runs very hot. The system needs topping up from time to time. Later cars have a sealed system in which any overflow goes into an expansion tank, from which it is sucked back into the engine when the remaining liquid cools.
car overheat
थर्मोस्टेट वाल्व
Please watch my previous video.
Constantmesh Gearbox & Synchromesh Gearbox.
• Gearbox Working, Const...
Clutch कैसे काम करता है ? Clutch के पार्ट्स
• Clutch working? clutch...

[@rajamathews1551]

very well explained

[@mdarbaz4847]

Nice

[@arun_y_t_13_y53]

Nice👍

[@SandeepKumarsk009]

Radiator kaise kam karta hai ye to bataya hi nahi