When I left school in 1948 my first job was in a blacksmiths shop in England. He used to turn his scrolls without a torsionator, by hand. The torsionator certainly takes a lot of hard work and time out of the job. I'm not a blacksmith but I like your videos and find them fascinating. My grandson is outside as I write this using a set of ordinary fireplace bellows I made him for Christmas a few years ago, to get the heat up for some sort of knife he is making. He has made me promise to make him a forge. Thanks again for the videos Great stuff..
Nice great job as a retired welder of 32 yrs built ski lifts for 25 yrs I have to honestly say I miss it , its nice having good equipment, My very last welding job I Fabricated 1/3 of the steel barrier fence that surrounded ground zero after 911 , great work
What a great machine, wish had one when i was making scrolls, much better than welding studs to the bench and pulling like hell, didnt need to go to the gym though !
Silly things like this make me want to be a backwoods(-ish) canadian blacksmith. Outside of the bad back, and the inevitable joint loss, it looks like a lot of fun.
Great design and Fabrication!! If you don't mind saying - is it speed reduction gear drive or hydraulic? Based on the Sound I guessed gear drive. Very Impressive How it works - Very Smooth - And I could tell even with 3/4 bar it was not (obviously) straining!
I picked up a trick to close a pair of vise grips from my shop teacher a little while ago; if you were to have held it backwards from how you were holding it, it snaps shut with much less effort. Good betting game too, see who can close it tightest!
![[ไฮไลต์] ฟุตบอลชาย ฝรั่งเศส vs อเมริกา รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/oZ9aSS0NEEg/mqdefault.jpg)
When I left school in 1948 my first job was in a blacksmiths shop in England. He used to turn his scrolls without a torsionator, by hand. The torsionator certainly takes a lot of hard work and time out of the job. I'm not a blacksmith but I like your videos and find them fascinating. My grandson is outside as I write this using a set of ordinary fireplace bellows I made him for Christmas a few years ago, to get the heat up for some sort of knife he is making. He has made me promise to make him a forge. Thanks again for the videos Great stuff..
ron martin Mhg
ron martin Mhg on
ron martin Mhg
,
,
Excelente maestro..
MUCHAS GRACIAS POR SU COLABORA
CION EN BUSCA DE
LA EXELENCIA.🔧
Nice great job as a retired welder of 32 yrs built ski lifts for 25 yrs I have to honestly say I miss it , its nice having good equipment, My very last welding job I Fabricated 1/3 of the steel barrier fence that surrounded ground zero after 911 , great work
Ol School Welding Tips and Tricks
Arcturus Welding & Fabrication wow am a female welder and am impress with your years of welding I wouldn't mine learning a thing or two from you
Arcturus Welding & Fabrication hj
Love that Miller welding gloves(ARC ARMOR)!!!
You guys are awesome. So good to see this.
I really want to make one of those. It would go great with my everlast welder for making all sorts of products.
That guy breathes like a dragon! Great work! Congratulations!
You working hard.With love and best wishes.
You could use a long handled channel lock to close those vice grips a little easier.. cool video! Nice work 👍
Ain't nothin' like a good old pair of vice grips.
Love the lathe in the background!!
I love how the Torsionator sings a 1-5-8 chord when in use, or at least how that shows up in the video, it's a thing of beauty...
Freakin Cool Man!!!! Thanks so much for sharing:)
Very good movie. Waiting for more. Even when you're retired.
Custom, slick and cool.
Amazing! Thanks for sharing!
GOOD IDEA THANKS.
I work in a actual machine shop in texas. nice video brother. would like to do some one day.
like your work. thx for the demo.
Nice job...quick work of that bar.
judging by how popular this is he should market this machine lol.
Te felicito Amigo, Buen Trabajo
Спасибо за видео, хороший стол.
Good!
@modernblacksmith man thats a great invench i saw the other vids of you runnin it.but didnt realize you built it!1.5hp that is crazy
could you tell me about your equipment to be produce it? ex such as 2d plan
Good job!... I really liked your video...
Good scroll machine!
Going to checkout your other blacksmithing vids.
John
Excelente job. Congratulations. From Santiago Chile
What a great machine, wish had one when i was making scrolls, much better than welding studs to the bench and pulling like hell, didnt need to go to the gym though !
Great job !!! but I heat whether cold.
The winther is the hell .
Awesome machine!!!
What kind of motor is it using?
Silly things like this make me want to be a backwoods(-ish) canadian blacksmith. Outside of the bad back, and the inevitable joint loss, it looks like a lot of fun.
@ornametalsmith I've thought about that, and I usually forget to deploy that idea when the time comes!
this design would make some amazing fences
jesus that thing has some power to bend that stuff cold
NIce brother...would love to see you make a gate with those..would look nice around a swimming pool !
Wow. That was very cool.
blacksmithing......and a Concours in the background. Bit to snowy to ride the Connie, so we twist some steel.
Looks good man!
What kind of motor you use , I would like to make one of them for my shop
when i took metal shop we made the small things,wine rack,napkin holder things like that.....where would you find or buy a top like that...ty
nice job
this is sick. what a great trade.
Good job Man !!!
good job and my respect for you
I wish I had this machine.
Great design and Fabrication!! If you don't mind saying - is it speed reduction gear drive or hydraulic?
Based on the Sound I guessed gear drive.
Very Impressive How it works - Very Smooth - And I could tell even with 3/4 bar it was not (obviously) straining!
Damn well done !
Nice work
very good to work there..hot work and cold weather! very nice..! greeting from Philippines!
what ya using for a motor/gearing for that there machine??? make a video of that will ya!!
Safety glasses! You asked to be reminded, sir!
Dude that thing is a B E A S T !!!
ótimo trabalho,parabéns,abraços...Alexandre-------BRASIL
gracias amigo por compartir tus conosimientos
I have absolutely no need for one but I want a torsionator!
Очень хорошие руки у вас ,а это самое главное для умельца. Супер.
mainly fence work, and things like window bars, yard ornaments...
and in some cases even to make a cage!
thats all i can think of...
I picked up a trick to close a pair of vise grips from my shop teacher a little while ago; if you were to have held it backwards from how you were holding it, it snaps shut with much less effort. Good betting game too, see who can close it tightest!
Belíssimo trabalho, parabéns!
Good jod ....greetings from Italy
The torque!!!!!
Many many... Thanks you
what are these scrolls used for?
by the way where can i get blacksmithing lessons?
Hell you got this damn thing and I have to bend 1/2 in round to make plant hangers by hand! (the metal is cold btw)
I appreciate Vise Gris so much!
can I ask what your using for a drive motor, on the jig, is it just a hydrolic moter
Love your channel 👍
buzz lightyear h
That is awesome, i want one. :)
@leonrenaud developing the machine over the next few years, not likely to sell plans yet
super work
wow. what are these scrolls used for ?
what kind of motor you have under neath it
Do you use these for fences? Like, you use this technique to get that shape?
Nice machine any videos on you torsionator?
.hey, my father is a blacksmith too and i want to build for him this machine
im trying to to figure out which kind of motor to use
What is the big scroll used for
Keep it up man!
what you used scroll for
Very nice! Great design and process you've made!...but I'll be honest, that's quite the risk to the eyes!
What motor is used ? Any pictures
150:1 - what do u mean by that/ is it a gear system ? thanks..old school really great
Very neat.........
now that'll save some serious time!
good idea....
wow, that's cool!
hey where can i get one of those torsionators at
I can, just find me a daedric heart. lolz
@modernblacksmith whats the biggest stock you can bend cold
That's one cool.Machine...
how much torque does that have?!?
That's awesome
What power is the engine
So what came first? The scroll or the die?
Now you just need to get a Ringinator, and you'll have a set.
what u got turning that can we see how you rigged it up please
Good Bless Mexico ....
good work
Nice Connie in the background
Me gustria saber como fabricar una o mejor dicho tener los detalles para la fabricacion
Ja its good work