Thanks for taking the time to make these videos. They are helpful and just make me realize how many people are giving half a## information... You have been so helpful and just know that the wool grade you have is the strongest.. 😁 all your tips are #1 but the wool steal takes the cake..
This is amazing! Thank you so much for this info/tutorial. I was avoiding doing any furniture stripping because of the chemicals, and you've shown me a safer product to use!
Thanks for the detail tutorial 🙂 last time I used the stripper, actually had to strip Infront of all my neighbourhood try to wash of chemical burn 🙃 checked out local stores there's none, where can I purchase this in Sydney AU ?
I want to strip a dark stain n finish off a dining table. I believe it is an oak veneer. It has been damaged from a foam table protector. I would like to make it a lighter stained top w a finish on top. Would i use the stripper first, then the cleaner, or just the cleaner. It is not painted, it has a dark stain w a varnish of some kind but some damage from the foam that needs to be removed
Now my problem. With advice from internet, I primed and painted cabinets. They are ugly again less than a year! I want to go to WO enamel. How do I clean up 1st mess to do it right? Help!!😢😢
I wanted to try and used it on 4 dining chairs with lots of grooves. I painted a layer and let it sit for about 4 hours and nothing scraped off. I know I must be doing something wrong because I have seen it work for others. Any tips?
Never heard it not work… be sure to get a thick enough coat on and ensure that coat stays in place for the time you leave it on. Cannot be a thinly painted on coat, especially for paints and top coats that are tougher to strip. You need a good thick coat and one that stay on fully for that time period needed.
Same. This didn’t work at all for removal of stain from some of my vintage pieces. It removed blonde MCM finish, but I left it overnight with plastic wrap and the next day it was tacky, but dried up and I needed to add the gel again and waited about 30 min and was able to remove most of it, but I wouldn’t use this not covered with plastic wrap s d don’t let it sit more than 3hrs as it will start to harden back up. Removal of stain and poly… both gel and spray do not work a d my shipment arrived with no instructions or safety and tech data that says to read first on the top of both bottles and I did t get a spray nozzle. There’s no instructions on how to clean it off the items either. This video just says wash it off, but how? I have an end table and coffee table that was coated in both products and it absorbed it and turned solid. I didn’t use it on particle a board piece, it was a higher end set that was solid wood. I’m not sure if another product can even be applied over this product. But I paid a lot to have to apply it twice to remove the finish as the company doesn’t have clear instructions on use and Amazon wasn’t aware how to use it either.
Thanks for taking the time to make these videos. They are helpful and just make me realize how many people are giving half a## information...
You have been so helpful and just know that the wool grade you have is the strongest.. 😁 all your tips are #1 but the wool steal takes the cake..
This is amazing! Thank you so much for this info/tutorial. I was avoiding doing any furniture stripping because of the chemicals, and you've shown me a safer product to use!
Thanks for the detail tutorial 🙂 last time I used the stripper, actually had to strip Infront of all my neighbourhood try to wash of chemical burn 🙃 checked out local stores there's none, where can I purchase this in Sydney AU ?
You demonstrated on horizontal surfaces, but how well would it work on vertical surfaces? Would it run down?
Could you please make a *floor stripping* video❤
I want to strip a dark stain n finish off a dining table. I believe it is an oak veneer. It has been damaged from a foam table protector. I would like to make it a lighter stained top w a finish on top. Would i use the stripper first, then the cleaner, or just the cleaner. It is not painted, it has a dark stain w a varnish of some kind but some damage from the foam that needs to be removed
What is the best resource to learn the science/chemistry of paint and removers?
How does this compare to Franmar's Soy Gel Paint & Urethane Stripper or 600GL?
What grade of steel wool is recommended for?
Now my problem. With advice from internet, I primed and painted cabinets. They are ugly again less than a year! I want to go to WO enamel. How do I clean up 1st mess to do it right? Help!!😢😢
I wanted to try and used it on 4 dining chairs with lots of grooves. I painted a layer and let it sit for about 4 hours and nothing scraped off. I know I must be doing something wrong because I have seen it work for others. Any tips?
Never heard it not work… be sure to get a thick enough coat on and ensure that coat stays in place for the time you leave it on. Cannot be a thinly painted on coat, especially for paints and top coats that are tougher to strip. You need a good thick coat and one that stay on fully for that time period needed.
Same. This didn’t work at all for removal of stain from some of my vintage pieces. It removed blonde MCM finish, but I left it overnight with plastic wrap and the next day it was tacky, but dried up and I needed to add the gel again and waited about 30 min and was able to remove most of it, but I wouldn’t use this not covered with plastic wrap s d don’t let it sit more than 3hrs as it will start to harden back up. Removal of stain and poly… both gel and spray do not work a d my shipment arrived with no instructions or safety and tech data that says to read first on the top of both bottles and I did t get a spray nozzle. There’s no instructions on how to clean it off the items either. This video just says wash it off, but how? I have an end table and coffee table that was coated in both products and it absorbed it and turned solid. I didn’t use it on particle a board piece, it was a higher end set that was solid wood. I’m not sure if another product can even be applied over this product. But I paid a lot to have to apply it twice to remove the finish as the company doesn’t have clear instructions on use and Amazon wasn’t aware how to use it either.
Is this product made by Wise Owl?
Will it remove minwax wax finish?
I haven’t personally tried it, but I’m sure it will if it’s removing varnish which is typically harder to remove
❤️❤️❤️❤️❤️❤️
This should work on a polyurethane painted guitar?
Where do i get it 38:27
Coulda been a 20 minute video!
Great topic ! But please don’t talk down to us. We got it the first time more action less talking! Great voice easy to listen. Thnx