Side note, I placed Grip Tape on my levers about a year ago. Get ready to fly through gloves. I have had to buy three pairs this season when normally I get a new pair once a year. Hey wait a minute, you guys sell gloves...I see what you did there. :)
skiboot steeze boot dude its not bad at all this guys over reacting i have grip tape on all my bikes and havent once worn a hole from it maybe get better gloves
@@freerider8737 or maybe he should use less brakes 🤣 I haven't done it yet, but ride with a guy that does and this was my first question. He said he hasn't had an issue yet.
Is a hydration pack lame? Not if I’m thirsty. I understand enduro guys not wanting to wear them, it’s extra weight but should someone decide they want to, who cares? When did mountain biking become so Hollywood? Oh no! He’s not wearing the right shirt! Hydration packs are so last year! Lol! I’m just hear to ride the trail, don’t mind me...
I put the grip tape on my rotors, spray polish on my tires, 3M tape around around my chain, moto sponge in my spokes and velcro straped my brakes levers to my grips.
@0:41 Dave Nourie style '80s BMX Freestyle balance tricks. Glad to see those funky trackstand variations are making a comeback. In other news, that Helm looks so sweet. Cane Creek is killing it with the crazy color variations on these.
I'd always rather use bag instead of strap for holding spare inner tyre and tools. I like to give inner tire a bit more space so it is not totally squeezed like with the strap, as it gets damaged over time on the most bent parts.
The 3 m tape is for electrical work. It’s in the electrical section of the depot. I use it all the time on my gt sensor. Chain stay for my chain and my heels works excellent.
Simple green to clean your whole bike. Especially the drive train. This works amazing and it %100 good on brakes. And using king of lube chain oil. These two things have keep my drive train looking amazing for the last year.
My riding buddies make fun of me but I ALWAYS use 1.5oz Wade's secret sauce (tire slime sealant, ant freeze, rubber cement, water) and 1.5oz orange endurance seal with half a teaspoon each of 4 different sizes of glitter, some crushed black pepper, a heaping teaspoon of corn meal (kitty litter works too) and some rubber shavings I cut from worn out knobs on old tires . . . My friends say its overkill but I have only needed to use a bacon strip one time since I started using this concoction. I swear it seals 99.9% of punctures and more importantly it seals them FAST so virtually no air pressure is lost. Trust . . . . It works
Instead of using Velcro straps for the tube and such use Voile straps. Velcro degrades in hold strength after a lot of use and also gets harder to use when it's muddy. Voile straps are rubber and will never loosen by themselves and also handle adverse conditions very well. They were originally ski straps but the bikepacking community has found they work great for holding stuff on the bike like bottles and tents and such. Sometimes for longer rides I'll attach a spare water bottle onto my top tube as my bike has just one bottle cage. I use also one to hold my U-lock on my commuter bike.
Grip tape is a great tip, but from experience I would take a rock and gently remove some of the grit before putting it on your brakes / shifter. I went through two pairs of gloves in one downhill season from grip tape ripping through the fingers.
Slapper tape is awesome stuff. I always hit a new bike with plenty of slapper tape to prevent that chain rattle. Another good pro tip i saw is to use heat shrink instead of cable ties to hold your gear cables and brake cables together. Looks real sleek!
Props for the tips! I put the rubber tape on my Switchblade in open areas, and no more chain noise! Love it! I also used it on my shifter lever in place of the grip tape, works awesome!
Clean your bike spotless apply any 3m tape for wear areas and then do a ceramic coating a $15 bottle (like Turtle wax hybrid) will do multiple vehicles and your bike. It's hydrophobic and repeals dirt/mud very well. You can also add a coat of Maxima SC-1 a silicone bases product, I find the ceramic coat lasts much longer.
I did the tube strapped to the frame trick.. until I had to shove a nasty dirty tube into my tire. Lots of cleaning when I got home to get all the small sand and dirt out of my tire.. next time I'll take a hike in the woods to find me a creek to clean my tube before putting it in or put the tube in a sandwich bag LOL.
I don't know if it's just me but I find the grip tape is a little rough with my fingers. When I ride in the wet I use brake lever grips from Miles Wide.
I think the main reason for moto foam is to keep the weight of your bike low if you ride in deep mud. If it's really muddy and your bike has some places where mud collects this can quite add up to some additional weight. When you put moto foam at these places then there is less space for the mud to collect - thus it keeps the weight low.
I got a 1 up edc and a granite strap with one of those mini tubes and the granite tool with a masterlink plyer tools and 2 tirelevers and it holds a masterlink and my edc holds 1 too. The masterlink plyers also dubbles as a tire valve nut remmover in case i need the tube. And a small tire pump. I think I'm good to go.
Mastic tape is used for work on electrical splices and such. Personally I prefer linerless rubber splicing tape on my bike. Both items available at any wholesale electrical supplier. Both are a 3m product
I used a used inner tube i cut a nice piece and than use tie wraps to put it on my frame works great but then i bought the Shimano XTR M 80000 dereailluer that have a lock on system that will prevent chain slapping
I use a traction pad for surfing and cut it into pieces, or strips......better than mastic tape!! I use it on my chainstays, downtube, seatstays, and dropper post, shift levers. Da Kine would make a killing if they branched out into frame protection for MTB's!!
BEST CHAIN LUBE: Get raw high grade paraffin wax and P.T.F.E. in the 1.6 micron variety. You want a 10 to 1 ratio wax to P.T.F.E. Put into a small sauce pan and heat on stove on lowest possible setting, stirring frequently and NEVER allowing it to come to a boil. Bend a metal hanger and hook it through your chain several times, don't forget to hook your quick link as well (clean chain THOROUGHLY with degreaser before hand and make sure its completely dry). Dip your entire chain in the liquid mix once everything has melted into a liquid. Swish your chain around several times, let it sit 5 minutes swish again repeat 3 times for a total of 15 minutes. Pull chain out and hang it on something above the pain allowing the chain to drip dry until its completely dry (about 10 to 12 minutes). Find a round drawer knob to wrap chain around and pull back and forth to break up hardened wax and free rollers, then install. I GUARANTEE you will not only notice less drag when pedaling but you will DEFINITELY notice how much cleaner your entire drivetrain stays. Reapply every 90 days.👍
Alright. Good vid but you FORGOT to mention that the Maxxima spray it like “liquid kashima “. Wipe it on stanctions and rear shocks. You WILL notice a difference
A great hack I use is to fit everything I need in an altoids tin and put it in my pocket, then rubber band a co2 to the outside of that. My favorite thing is a mini ratchet with Allen and t25 bits that fits in there too! If you aren’t carrying a tube this is great.
You can use Pledge in place of SC1..cheaper and does same/same..been using pledge on my motorcycles, RC Cars, and my Road/Mountain bikes....just don't get it on your rotors as stated in video. works great everywhere else.
I know this is an old video but given Covid19 lockdown, lots of older videos are being viewed haha, but I have to say to me I will likely never get rid of my pack. I may be the only one but I prefer to have that extra room, to carry few other items others might not carry with them like a small first aid kit, snack bars, GoPro parts, wallet, keys etc. And you just can't strap that to the frame.
Does the gear strap keep things contained when you take it off or is everything held to the bike based solely on pressure? Is it easy to take on and off between rides?
Hey these are GREAT tips. I love the grip tape on the brakes. I've used hockey tape, which I use for many things on bikes, but I'm going to try the grip tape now. I need a tip--do you have one for this: What's a good solution for protecting the BB side of my SWAT inside my carbon SJ frame? I've heard that dirt, debris, pine needles, field mice, racoons, circus clowns, etc, can get down into the BB area and I DON'T want that to happen. "Dear Abby, is there a solution?" Thanks! ~JSV
Pro tips: gripper tape on my pedal faces, Velcro handle on my integrated battery, $20 bill in seat post for emergencies, toilet paper in the camelback, bucket in car with a bag liner for use with said toilet paper, first aid kit with epiPen, emergency contacts in wallet, emergency reflective blanket, trash bag poncho, Deet, sunscreen SPF 100, duct tape, zip ties, bear spray (or CCL), satellite phone📱 ....oh, and body armor
Shhhhh.....it's a Yeti Team only strap, haha. Unfortunately, I don't think they sell them as an aftermarket product. A little birdy told me they sometimes hand them out at events like Sea Otter. 🤙
Maxima doesn't look very good on my matt finish Pivot. I guess it would be ok on the dropper post, rims and fork. That's vernier abuse at 1:53! Go grab a straight edge for straight cuts instead of ruining your $5 vernier!!!
Check out this Matte Finish polish from Muc-Off, it may be just what you need. :) www.worldwidecyclery.com/products/muc-off-matte-finish-detailer-750ml
I've used this on my Matte paint motorcycle and bike it's awesome! www.meguiars.com/automotive/products/meguiars-ultimate-quik-detailer-g14422-22-oz-spray
Matic/rubber tape is used for wrapping and insulating wire connections inside of electric motors and pumps. With that said a d having used the stuff, I wish I had thought about using that for my chain stay. 🤦♂️
Let us know your favorite MTB Tips!
Putting a pedal washer behind the derailleur bolt so the derailleur doesn't pivot backwards and it stays quieter.
Nice! I do that on my bikes as well. :)
How does this work ?
Easiest budget carry strap is 300mm drone battery lipo strap. They come in silicone and kevlar reinforced variants, and some decent colors.
I use hockey tape on my brake levers
Works pretty well
0:41 yep, pressure is ok
Side note, I placed Grip Tape on my levers about a year ago. Get ready to fly through gloves. I have had to buy three pairs this season when normally I get a new pair once a year. Hey wait a minute, you guys sell gloves...I see what you did there. :)
I don't even get the grip tape thing. I just drill holes in it if I can not grip it or grooves.
I use velcro
skiboot steeze boot dude its not bad at all this guys over reacting i have grip tape on all my bikes and havent once worn a hole from it maybe get better gloves
@@freerider8737 or maybe he should use less brakes 🤣 I haven't done it yet, but ride with a guy that does and this was my first question. He said he hasn't had an issue yet.
@@Vanadium weigh reducting and grip increasing in one shot!
Is a hydration pack lame? Not if I’m thirsty. I understand enduro guys not wanting to wear them, it’s extra weight but should someone decide they want to, who cares? When did mountain biking become so Hollywood? Oh no! He’s not wearing the right shirt! Hydration packs are so last year! Lol! I’m just hear to ride the trail, don’t mind me...
For most rides I find hydrating lots before and after + 1 bottle in the cage is plenty 😊
1 bottle on the frame, 2 in the hippack, i just cant stand how a full pack feels, i would carry everything on the bike if i could.
totally, im in the hills to ride, not strut my stuff.
Nate Hills rides with a nice big pack every ride I have watched on #followcamfriday and he is faster than 95% of us posting on here. Be like Nate...
Try it and you'll never look back.
Anybody else notice that computer home screen
All I could see for the whole video.
Yeah. If her and Jeff had switched places I would have given this video two thumbs up.
Sean Walsh it was really distracting
I actually didn't know Jeff was in the video till the end HAHAHA!
Moral support....
"Pull it out, shake it off and put it back in."
At Home Depot the rubber tape is in the electrical department.
took me so long to find it, a good 30 minutes of looking in store.. but the stuff is a godsend for sure!
It's used to water tighten electrical connections.
I put the grip tape on my rotors, spray polish on my tires, 3M tape around around my chain, moto sponge in my spokes and velcro straped my brakes levers to my grips.
@0:41 Dave Nourie style '80s BMX Freestyle balance tricks. Glad to see those funky trackstand variations are making a comeback.
In other news, that Helm looks so sweet. Cane Creek is killing it with the crazy color variations on these.
I'd always rather use bag instead of strap for holding spare inner tyre and tools. I like to give inner tire a bit more space so it is not totally squeezed like with the strap, as it gets damaged over time on the most bent parts.
Also, put frame tape anywhere the strap or contents touch the frame. Mine wore through the paint in about five rides!
Yeah I don't like dealing with a muddy gritty inner tube if I'm installing it.
The 3 m tape is for electrical work. It’s in the electrical section of the depot. I use it all the time on my gt sensor. Chain stay for my chain and my heels works excellent.
Simple green to clean your whole bike. Especially the drive train. This works
amazing and it %100 good on brakes. And using king of lube chain oil. These two things have keep my drive train looking amazing for the last year.
Murphy's Oil Soap is also great for bike washing
What I used for strap to carry my tubes is an old broken leash that I used for surfing It's wide and the velcro is strong.
My favorite is glitter added to tire sealants
Kobe Bierotte no from world cup racing they have been using that and cut up foam since tubless was a thing
My riding buddies make fun of me but I ALWAYS use 1.5oz Wade's secret sauce (tire slime sealant, ant freeze, rubber cement, water) and 1.5oz orange endurance seal with half a teaspoon each of 4 different sizes of glitter, some crushed black pepper, a heaping teaspoon of corn meal (kitty litter works too) and some rubber shavings I cut from worn out knobs on old tires . . . My friends say its overkill but I have only needed to use a bacon strip one time since I started using this concoction. I swear it seals 99.9% of punctures and more importantly it seals them FAST so virtually no air pressure is lost. Trust . . . . It works
Bottombracket magnet axle with integrated tools in the axle is handy, ive seen many EWS racers been doing that.
The Mastic tape can be found in the Electrical section
Instead of using Velcro straps for the tube and such use Voile straps. Velcro degrades in hold strength after a lot of use and also gets harder to use when it's muddy. Voile straps are rubber and will never loosen by themselves and also handle adverse conditions very well. They were originally ski straps but the bikepacking community has found they work great for holding stuff on the bike like bottles and tents and such. Sometimes for longer rides I'll attach a spare water bottle onto my top tube as my bike has just one bottle cage. I use also one to hold my U-lock on my commuter bike.
top tip, put the grip tape on your tyres for extra grip in those muddy conditions!
CamCakes Seriously, does that really work ?
Jeff
Tip #6 Get a computer screen saver like the one Jeff uses (left side of the video)
eletrical tape a spare chain link to your shift cable at the shifter. always comes in handy.
Grip tape is a great tip, but from experience I would take a rock and gently remove some of the grit before putting it on your brakes / shifter. I went through two pairs of gloves in one downhill season from grip tape ripping through the fingers.
That would be my concern as well.
Slapper tape is awesome stuff. I always hit a new bike with plenty of slapper tape to prevent that chain rattle. Another good pro tip i saw is to use heat shrink instead of cable ties to hold your gear cables and brake cables together. Looks real sleek!
Rob Fulcher you got that from Seth’s Bike Hacks
Tip: Drill screws into your tires for extra grip. Your sealent will fill it up
yup and if you run someone over or your self uh that must hurt
Here’s a tip: most water bottle cages have a open section in the middle where the bolts go. It’s a great place to fit a tire lever
Under the cage? Under the bottle?
Props for the tips! I put the rubber tape on my Switchblade in open areas, and no more chain noise! Love it! I also used it on my shifter lever in place of the grip tape, works awesome!
Rad! Glad that the tape worked out for you and improved your ride. :)
Excellent idea
The tape can also be used to make ridges where your chain is slapping on your chainstay. The ridges slow down the harmonic oscillations of the slap.
SC1 is a gift from god himself! I use it on my quad, mtb bike, and even truck on all the black trim pieces!
Clean your bike spotless apply any 3m tape for wear areas and then do a ceramic coating a $15 bottle (like Turtle wax hybrid) will do multiple vehicles and your bike. It's hydrophobic and repeals dirt/mud very well. You can also add a coat of Maxima SC-1 a silicone bases product, I find the ceramic coat lasts much longer.
gloves with sticky rubber fingers and grips with large flanges, also tape a tube co2 levers and a godo multi tool to the frame, zip ties in the crank
For chainstay protection I use tennis grip tape, had it on for over a year and it still looks good and protects frame well.
The rubber mastic tape looks like butyl joining tape for pond liners so you could also try pond supply outlets.
2:04 And the new fox kashima scissors in preview :)
That polish might not be a good suggestion for Matte finish bikes.
you can spray lemon pledge on fenders and the down tube, prevents mud from sticking.
I did the tube strapped to the frame trick.. until I had to shove a nasty dirty tube into my tire. Lots of cleaning when I got home to get all the small sand and dirt out of my tire.. next time I'll take a hike in the woods to find me a creek to clean my tube before putting it in or put the tube in a sandwich bag LOL.
Great tips! Love the foam idea. Super smart
We electricians use the 3m mastic tape for insulating joints made with split bolts.
I don't know if it's just me but I find the grip tape is a little rough with my fingers. When I ride in the wet I use brake lever grips from Miles Wide.
I think the main reason for moto foam is to keep the weight of your bike low if you ride in deep mud. If it's really muddy and your bike has some places where mud collects this can quite add up to some additional weight. When you put moto foam at these places then there is less space for the mud to collect - thus it keeps the weight low.
Fork Cork to take a tubelees repair kit... zip ties inside hollow crank hole... quick link taped down the saddle :)
Mastic tape is used in the Electrical Field often when they do splices in wires. Its used as an insulator
I love how this channel takes your pro racer and only show him eating shit.
haha we only show it because we all know that he is faster than any of us! :)
By far the best trick to go faster is to apply wd 40 on your brakes i can't tell you the difference:))
I got a 1 up edc and a granite strap with one of those mini tubes and the granite tool with a masterlink plyer tools and 2 tirelevers and it holds a masterlink and my edc holds 1 too. The masterlink plyers also dubbles as a tire valve nut remmover in case i need the tube. And a small tire pump. I think I'm good to go.
These guys should not have 38 k subs but 3.8million subs
Thank you for the kind words! We appreciate the support :)
Mastic tape is used for work on electrical splices and such. Personally I prefer linerless rubber splicing tape on my bike. Both items available at any wholesale electrical supplier. Both are a 3m product
I used a used inner tube i cut a nice piece and than use tie wraps to put it on my frame works great but then i bought the Shimano XTR M 80000 dereailluer that have a lock on system that will prevent chain slapping
I just noticed the computer screensaver in the background😂
I use a traction pad for surfing and cut it into pieces, or strips......better than mastic tape!! I use it on my chainstays, downtube, seatstays, and dropper post, shift levers. Da Kine would make a killing if they branched out into frame protection for MTB's!!
BEST CHAIN LUBE: Get raw high grade paraffin wax and P.T.F.E. in the 1.6 micron variety. You want a 10 to 1 ratio wax to P.T.F.E. Put into a small sauce pan and heat on stove on lowest possible setting, stirring frequently and NEVER allowing it to come to a boil. Bend a metal hanger and hook it through your chain several times, don't forget to hook your quick link as well (clean chain THOROUGHLY with degreaser before hand and make sure its completely dry). Dip your entire chain in the liquid mix once everything has melted into a liquid. Swish your chain around several times, let it sit 5 minutes swish again repeat 3 times for a total of 15 minutes. Pull chain out and hang it on something above the pain allowing the chain to drip dry until its completely dry (about 10 to 12 minutes). Find a round drawer knob to wrap chain around and pull back and forth to break up hardened wax and free rollers, then install. I GUARANTEE you will not only notice less drag when pedaling but you will DEFINITELY notice how much cleaner your entire drivetrain stays. Reapply every 90 days.👍
Do I need to take out the moto foam before I wash my bike? Thinking a soaked sponge/piece of moto foam in any of those parts sounds scary
The proper foam is pretty porous so not necessarily, but a good idea to take it out so things dry more quickly
Alright. Good vid but you FORGOT to mention that the Maxxima spray it like “liquid kashima “. Wipe it on stanctions and rear shocks. You WILL notice a difference
Wd40 silicon spray works just as good too. A couple of drops and the stanchions are just butterrrrr
0:40 waiting for the song to kick in I love the minutemen!!!!
I have a yt capra base 29. It has no bottle cage mounts. Is there a quality product I can buy to put a bottle on my bike?
I love how he just plays with the foam
you can search products on Home Depot's website for the store location you are at, and it'll tell you what aisle/bay the product is in.
For some reason grip tape sticks to shiftlevers and sram brakelevers but not to shimano brakes and I don't know why
use a little sandpaper
Curvature. Bunch of Flat Earthers, them over there at Sram.
A great hack I use is to fit everything I need in an altoids tin and put it in my pocket, then rubber band a co2 to the outside of that. My favorite thing is a mini ratchet with Allen and t25 bits that fits in there too! If you aren’t carrying a tube this is great.
Loving the video inserts.
You can use Pledge in place of SC1..cheaper and does same/same..been using pledge on my motorcycles, RC Cars, and my Road/Mountain bikes....just don't get it on your rotors as stated in video. works great everywhere else.
But have you smelled SC1?!
Ok for Carbon Fiber?
what about taping up the back of the fork arch so it doesn't pack with mud?
The rubber mastic tape is $40 CAD on Amazon. Where do I find this for $10?
I like how that's what mat Morgan is known of
Isn't there a sensor that plays the "Jackass twaaaaanggg" whenever the bike goes inverted?
Sounds like you should get that patent and sell it to Shock Wiz ;)
the minutemen "corona"
What handle bar grips are on the bike behind you? I must have
Those are the ODI Elite Pro Lock Ons www.worldwidecyclery.com/products/odi-elite-pro-lock-on-grips-black-bonus-pack :)
I know this is an old video but given Covid19 lockdown, lots of older videos are being viewed haha, but I have to say to me I will likely never get rid of my pack. I may be the only one but I prefer to have that extra room, to carry few other items others might not carry with them like a small first aid kit, snack bars, GoPro parts, wallet, keys etc. And you just can't strap that to the frame.
Pic of Max is a baller way to check tire psi on the trail.
That yeti looks sick!!
Does the gear strap keep things contained when you take it off or is everything held to the bike based solely on pressure? Is it easy to take on and off between rides?
Good question! Everything is still held to the strap even when taken off of the bike!
Oh damn I saw that clip on insta!
Clear 3M protective tape for frame protection is my favourite
Hey these are GREAT tips. I love the grip tape on the brakes. I've used hockey tape, which I use for many things on bikes, but I'm going to try the grip tape now.
I need a tip--do you have one for this: What's a good solution for protecting the BB side of my SWAT inside my carbon SJ frame? I've heard that dirt, debris, pine needles, field mice, racoons, circus clowns, etc, can get down into the BB area and I DON'T want that to happen. "Dear Abby, is there a solution?" Thanks!
~JSV
What is the brand name of the bike rack adapter
Do you just screw the c02 head into a canister and it doesnt leak till you actuate it?
It will depend on the style of air check. There are a lot of different mechanisms for activating the CO2.
Excellent tips!!
Excellent
The day that my friend decided to go tubless he have 3 kids running around i think i explainded not to well that day...........
You can buy rubber brake lever covers ! E bay $2 !
Pro tips: gripper tape on my pedal faces, Velcro handle on my integrated battery, $20 bill in seat post for emergencies, toilet paper in the camelback, bucket in car with a bag liner for use with said toilet paper, first aid kit with epiPen, emergency contacts in wallet, emergency reflective blanket, trash bag poncho, Deet, sunscreen SPF 100, duct tape, zip ties, bear spray (or CCL), satellite phone📱 ....oh, and body armor
Sophia Chen this for real?
Kan you fix tubeless tire with the rubber tape?
Ronni Petersson no
Get well soon bro💪🏻
I use a strap and 2nd water bottle for essentials.
super cool thanks
Great tips! Thxs
Where did you get the Yeti mother-load from?
Shhhhh.....it's a Yeti Team only strap, haha. Unfortunately, I don't think they sell them as an aftermarket product. A little birdy told me they sometimes hand them out at events like Sea Otter. 🤙
Great tips!
Does anyone know the background of the computer
Best tip ever? Hockey Tape. Works for everything....better than duct tape.
put patch kits, allen keys, extra valve stems, etc in an old sunglasses bag in your seat tube
You should have linked the products in the description.
the 3m Tape is usually in the Electrical dept in Home Depot and can also be used as rim tape.
High gloss coating on matt finish *fucking mint*
Damn! I hope he can give us some tips on how to not fall like that! Holy crap!!!
What is the porpoise of the co2 ?
You can use it to inflate your tire on the trail without having to carry a pump.
Maxima doesn't look very good on my matt finish Pivot. I guess it would be ok on the dropper post, rims and fork.
That's vernier abuse at 1:53! Go grab a straight edge for straight cuts instead of ruining your $5 vernier!!!
Check out this Matte Finish polish from Muc-Off, it may be just what you need. :) www.worldwidecyclery.com/products/muc-off-matte-finish-detailer-750ml
I've used this on my Matte paint motorcycle and bike it's awesome! www.meguiars.com/automotive/products/meguiars-ultimate-quik-detailer-g14422-22-oz-spray
Matic/rubber tape is used for wrapping and insulating wire connections inside of electric motors and pumps. With that said a d having used the stuff, I wish I had thought about using that for my chain stay. 🤦♂️
You are such an Internet troll. I love it !!
nice wallpaper
SC1 aka new bike in a can. Leave it on thick before a muddy ride
Velcro - Duct Tape - Coat hanger : )