That's where i pre-ordered my Talaria from Ebikezilla 👍 The light switch will definitely be a must i have the mud guard for it and kaniwaba 3.0 power pedal kit. Purple bars and pedals gonna look badass man lol Good video 👍
Just an FYI… I would invest in a good set of hex key bit’s if you’re going to be tinkering with this bike. I use the Wiha mini ratchet set, but anything Wiha is amazing especially if you’re working with cheaper Chinese materials and are worried about possibly stripping thing’s you shouldn’t. Plus it makes it easy to get into tight spaces with some decent torque with the 4” ratchet
Thanks for this! Will certainly remove the brake sensor on mine, it seems very strange that you can’t brake and accelerate at the same time, this is how you’re taught to ride in the UK at least!
I put passenger pegs on my talaria the other night and had a hard time breaking those peg mount bolts loose too. I used a long cheater bar and they broke right loose. I would avoid adding heat near the electrical components. When I’m doubt, add LEVERAGE
Nice! I’m glad it worked out for you. I definitely need to invest in some better hex wrenches. Mine always feel sketchy so heat was definitely better in my case by yea. If I could have used more leverage I would’ve preferred that
Surprisingly well. Everything is tight, and nothing has broken, even through my abuse. I ride it to work daily and jump it every single day and it’s been awesome even for a bigger dude like me.
Hello! Can the original factory controller of the Sting RMX 4 be programmed? I know replacing the controller would be the best solution, but that's too expensive. I live in Hungary. I would need the secret codes of the factory controller so that we can modify them. Thanks to everyone who can help with this.
Honestly, I really great video overall. I was really hoping you would get into kickstand sensor deletion, or even sensor removal, but so far nobody has.
Thank you 🙏 The only reason I didn’t is because my kickstand sensor never worked to begin with. If you do want to delete it then all you have to do is unbolt the sensor, it’s under the bike, and zip tie it out of the way. It operates off a magnet that turns the bike off when the kickstand goes down and connects. So as long as it’s far enough away from any steel then it won’t shut the bike off.
I bought the bike from Ebikezilla which is based in Canada. So they couldn't do it themselves without massive shipping costs. So the next best thing was to send me a working display free of charge. I'm very thankful for that because they shipped it very quickly and I was back out riding in no time. Plus the new display starts limp mode at 10% instead of 20% so I got a secret bonus!
@@haveagoodoneyt Okay. But since this seems to have been a warranty issue Ebikezilla (and ultimately Talaria) should have covered all the cost including shipping. The question is why they were not obliged to do so. Are there no laws for that in Canada and where you live?
@@intensegamer7559 honestly I wasn’t concerned with that. I wanted ride and I was just happy to get a free replacement as I’ve heard other dealers refuse to help. It all worked out in the end and I was happy.
Got my Talaria 3-2023 and it came with a peg brace and instructions 👍
So awesome that Talaria is listening to their customers
That's where i pre-ordered my Talaria from Ebikezilla 👍 The light switch will definitely be a must i have the mud guard for it and kaniwaba 3.0 power pedal kit. Purple bars and pedals gonna look badass man lol
Good video 👍
That's gonna be SO awesome!!!
Just an FYI… I would invest in a good set of hex key bit’s if you’re going to be tinkering with this bike. I use the Wiha mini ratchet set, but anything Wiha is amazing especially if you’re working with cheaper Chinese materials and are worried about possibly stripping thing’s you shouldn’t. Plus it makes it easy to get into tight spaces with some decent torque with the 4” ratchet
Couldn’t agree more. I used Home Depot generic hex keys and they were twisted afterwards. So I’m gonna get an upgrade soon for sure
@@haveagoodoneytmade the mistake of using husky socket bits from Home Depot.. I bearly put any pressure and it snapped like a tooth pick… uhgggg
What size is the peg brace bolts for the hex??
@@shane_ohara51 M8x1.25 and its 25mm long
I use wera tools and bits
Thank you so much bro!! Your awesome 😎🚀🤙
Thanks for this! Will certainly remove the brake sensor on mine, it seems very strange that you can’t brake and accelerate at the same time, this is how you’re taught to ride in the UK at least!
Glad it helped
When removing the brake sensor did it throw any codes error to the display ?
@@HummerH-mo4csno
I put passenger pegs on my talaria the other night and had a hard time breaking those peg mount bolts loose too. I used a long cheater bar and they broke right loose. I would avoid adding heat near the electrical components. When I’m doubt, add LEVERAGE
Nice! I’m glad it worked out for you. I definitely need to invest in some better hex wrenches. Mine always feel sketchy so heat was definitely better in my case by yea. If I could have used more leverage I would’ve preferred that
Great video but a water balloon and zip tie work's much better for covering up plugs.
That’s a great tip! Thanks for sharing! 🤙🏻
when you were drilling towards your hand was 😬. but nice informative vid. those peg bolts do strip very easily.
Hehehe sketchy for sure 😂. Yea my top one was super close to being completely stripped. Thanks for watching man! 🤙🏻
hi! I had exactly the same issue with the pegs screw dismounting ! huge problem at talaria factory with screwing torque and screws steel quality !
No kidding, hope they fix it
They don't have these problems. This was done on purpose.
just out of curiosity how is it holding up with you're weight? im 6'1 and 110kgs
Surprisingly well. Everything is tight, and nothing has broken, even through my abuse. I ride it to work daily and jump it every single day and it’s been awesome even for a bigger dude like me.
@@haveagoodoneyt Is the seat soft enough for the weight? Is anything on your body going numb?
Hello! Can the original factory controller of the Sting RMX 4 be programmed? I know replacing the controller would be the best solution, but that's too expensive. I live in Hungary. I would need the secret codes of the factory controller so that we can modify them. Thanks to everyone who can help with this.
Great vid! Just sub'd!👍
Aye thank you!
Those peg bracket bolts should have blue Loctite and be torqued to specification. 👍
Great point!
@@haveagoodoneyt ... Torque spec is 13 ft lbs.
@@2WheelTT In Australia... doing up a bolt tight to torque setting is called " She'll be right mate" ;)
Apparently the new version of the Peg brace does not require drilling on the Talaria.
Yea, absolutely! I just bought mine before they made a V2. The link I shared in the card is for the version two you’re talking about.
Honestly, I really great video overall. I was really hoping you would get into kickstand sensor deletion, or even sensor removal, but so far nobody has.
Thank you 🙏
The only reason I didn’t is because my kickstand sensor never worked to begin with.
If you do want to delete it then all you have to do is unbolt the sensor, it’s under the bike, and zip tie it out of the way. It operates off a magnet that turns the bike off when the kickstand goes down and connects. So as long as it’s far enough away from any steel then it won’t shut the bike off.
OK cool! I just did exactly that while installing the NTC designs peg drop and brace kit. Will be testing the bike here in about an hour.
@@nightdrv awesome man! Let me know how those peg mounts feel
One question: why did the dealer not do the display swap free of charge?
I bought the bike from Ebikezilla which is based in Canada. So they couldn't do it themselves without massive shipping costs. So the next best thing was to send me a working display free of charge. I'm very thankful for that because they shipped it very quickly and I was back out riding in no time. Plus the new display starts limp mode at 10% instead of 20% so I got a secret bonus!
@@haveagoodoneyt Okay. But since this seems to have been a warranty issue Ebikezilla (and ultimately Talaria) should have covered all the cost including shipping. The question is why they were not obliged to do so. Are there no laws for that in Canada and where you live?
@@intensegamer7559 honestly I wasn’t concerned with that. I wanted ride and I was just happy to get a free replacement as I’ve heard other dealers refuse to help. It all worked out in the end and I was happy.
@@haveagoodoneyt Well then, good for you, Ebikezilla and Talaria :-)
Enjoy your ride and keep making videos. Cheers
@@intensegamer7559 Thanks man!
thank you
You're welcome!
I’ve had 49 mph out of mine,how about you?
I hit right about 48 maxiumum
I was going downhill lol
45 so far but i weight 230
There will always be some one bothered
Very true
Is your Talaria an MX3 model?
Why wouldn't you want to use liquid thread locker? The manufacturer Talaria uses it for a reason!