How To Program DMX Lights | Beginner DMX Lighting Tutorial
ฝัง
- เผยแพร่เมื่อ 21 มี.ค. 2020
- In this video we walk you through the basics of how to program a DMX 512 controller with two LED par lights using a single controller and DMX. The tutorial includes information on how DMX works and how to set the address on the lights you are using. This is a beginner's tutorial on DMX and is intended for people that are looking to learn how DMX works with little or no previous knowledge.
If you're looking to learn how to control led lights with a controller - This video is for you!
These are affiliate links and I may earn a commission from Amazon (and others) on qualifying purchases.
Equipment in this video:
- Elation Stagesetter 8: geni.us/MBVAyz
- Chauvet FreedomPAR Quad 4 LED Light: geni.us/JnzoQbH
- DMX Cable (3-Pin): geni.us/n9wUK
We also briefly cover what a lighting universe is and how to address dmx lights.
For more information we have a blog post with more details: kettnercreative.com/news/how-...
These are affiliate links and I may earn a commission from Amazon (and others) on qualifying purchases.
BECOME A MEMBER OF OUR CHANNEL FOR PERKS & EXCLUSIVES:
/ @kettnercreative
STUDIO EQUIPMENT:
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
Microphone: currentprice.io/sony_lav
Studio Monitors: currentprice.io/hs5_monitor
Video Recorder: currentprice.io/ninja_v
Video Switcher For Live Stream: currentprice.io/atem_minipro
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
Editing Computer: currentprice.io/mac_mini
Editing Monitor: currentprice.io/lg_32in_4k
We Optimize Our TH-cam Channel With:
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Threads: www.threads.net/@kettnercreative
Disclosure: If you purchase an item or service using one of our links, it provides us with a referral fee. - ภาพยนตร์และแอนิเมชัน
Yes! Finally an explanation of setting addresses! Most other tutorials assume you know something this basic, but, some of us didn't. We do now. Thanks!
This is exactly the kind of introduction I was looking for. Thank you!
Also, I'm glad you referenced this video in another one you made about a specific DMX controller or else I wouldn't have known this tutorial existed.
This was much helpful, thanks. You said exactly what I needed to know (that I should have known for many years) and nothing more; so I not confused.
Very clear, simple and effective. A lot of others have attempted this and they have not been as complete. I am very new to lighting and appreciated this video.
Thank you. Glad it was helpful!
Hi. You did a very good job at introducing dmx controllers. very helpful!
Solid and informative video, nice work!
Thanks Rick!
that was helpful! Thanks!
Thanks for this video. Have a nice day.
Thanks, you too!
Niiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiooooooooooooooooooooooceeeeeee Time to put this into practice
Thank you! I was getting hung up not knowing I had to make the second fixer Ch #5 to work separately!
Glad it helped!
Address 05
Thank u so much for this. I really like your tutorial. One question, I have 4 lights fixture, do I have to set up my 1st light to Master then 2nd, 3rd and 4th light to Slave?
Thanks man
You're welcome.
thanks again for the video. a question - how do you save the channel/mode that you set the fixture to? or do you need manually set the channel each time you power up?
Awesome video, so simple to understand. Thank you. A few questions for which you might have videos that explain but i haven't found them yet. I have 4 lights that connect to a dmx dimmer. I used to have a simple Leviton Controller with 8 faders, each fader controlled a separate light (depends on how the dimmer was setup) I had it setup as a 4 channel dimmer.
So in my setup for Christmas Plays i want to use those 4 lights connected to a dimmer so i can control the brightness. I also want to be able to connect some RGB DMX lights to create some ambient lightning to simulate different colors, but I want to be able to have each of those RGB lights set to a specific color and control the brightness of that color. is that possible? I bought a CHAUVET Obey 70 (it is so confusing).
I'm not even sure what questions to ask because I'm not even sure what the right questions to asks are. hopefully I can get some instructions. Thank you.
thank you we've had that board for years and just got led light bars by the same company and the directions they have don't help. thank you
what is the best wire for not flickering
Thanks bye información may You add the manual that can help me mucho gracias
What's the difference between A001 and D001 or channel 4 mode or channel 8 mode.
Does it have different function or advantages?
What if I add strobe to LED 1? What is the setting?
ADJ Products CH DMX DIMMING Controller, 48 Channel (Scene-Setter can I use automatically?
Please help 🙏 me, I have a scene setter 48 and I cant get the dmx light to connect
Its not showing anything
Thanks love from 🇳🇬 Nigeria
I’m kinda confused on setting channels. On other video, to control light separately first light is set to 001, and second light is set to 017?
Address. First address is 001. Second address depends on how many channels your light has. If your light has 9 channels, then your next fixture is set to address 010
🤔
I hope you found this helpful.
Yes sa
New light vedio sir