Awesome video! I started asking a couple of questions in the comments before finishing the video, and you ended up answering both those questions. I've never spearfished and just got a Mares Viper Pro World Champion 100 in a trade. It's set up with the reel line directly to the shooting line with a swivel and was wondering if I needed a bungee, and I was also wondering whether it was ok to double wrap and have the reel line going over the line release. Thanks for clarifying both!
Many do tie direct to the spear because you can then have single or double wrap, you decide what you need. Another option, when shooting very close like in a cave, you can set up with no line going back to the line release. This enables you to pull back on the spear to get the fish away from the cave. The only disadvantage with this method is that there is no way to disconnect the spear without cutting the shooting line. It's a good option to sometimes be able to push the spear right through the fish and pull the line out then re connect.
I have the tuna reel gun and I cut the shaft line by mistake . Can I still use the same reel line and attach it to the shaft? I have the rob allen spectra line for reel would it work
I would say so as long as it's a good knot and u still wrap the shooting line like normal. But keep in mind if there no clip and u can't get the shaft out u will have to untie/cut the knot
Hi Rob do you know the diameters of the vecta2 handle please? I got a cuttlefish barrel on the way with 26mm inner and 30mm outer diameter and want to get the vecta 2 handle with the vecta reel attached on it but unsure if it will fit? Any help would be highly appreciated!
Im looking to upgrade from my ab biller 36 special to one of your rob allen carbon tunas but I'm not sure what size would be best for me. Want to hunt Cobia tuna wahoo. Will be using the band pull assit to help since I'm short armed. Pls help
Hi, wheres the best place to order either of the line guides? USA option please. Thanks for a great gun! Just got my snapper 1100 in the mail. I must say it is pretty epic!
@@lxSouthParkxl OK just to be clear, the slip knot between the end of the reel line and the join to the mono shooting line? There are 2 options here, single wrap and double wrap.
@@lxSouthParkxl We did a load test long time back and the double wrap protected the mono better. I do remember the mono broke both times before the Dyneema but the double wrap did allow the mono to only break at a much higher load. I will do both and video it this time, not sure when it will go up but it is on the list, thanks for the suggestion.
@@RobAllenSpearfishing to avoid the dyneema line to be twisted on itself = becoming a difficult line to use after it is twisted // to avoid the reel line ( nylon ) to be bent to a point where the line is difficult to be not pinch out ( damaged ) especially if pinched out before the sleeve on the mechanism side ...( difficult to reload in the trigger ) ! any way this is not a critics as i always load a Pigtail swivel on any from my brand spearguns , but a point you should consider ...
@@z1tazzz we fit clips with swivels as standard but some chose to remove. Yes it can twist up occasionally but I don't see it as a problem. If there is twisting, just let the spear hang a moment to untwist.
@@robertrodriguez391 Sorry, I don't understand the question? This was done 8 years ago, I can't seem to fine where I may has used that term, please elaborate.
@@RobAllenSpearfishing yeah fair enough! Alex The Truths comment " No sense of a bungee when having a reel with advance - it will shocked absorb better than bungee anyway." I wanted to understand What his comment meant that you agree with. That's all :)
Hi Robert, I saw a response from you but it did not show here? All good, I should have read the above response to see what you were referring to. I assume "A reel in advance." means it will act like a bungee and let out line "advancing" the line in the same direction the spear is pulling when fired. I agreed more to eliminate the bungee as well because it is just another link in a chain. The bungee is there to keep tension on the shooting line but now the reel can be adjusted to do the same.
Useless video... talked about wverything except on how to attach reel to gun... do you drill screw holes on to the gun? Wont that damage gun? How do you do it without damaging gun? Disapointed
![[HOW TO: Rig a Speargun that comes with the reel]](http://i.ytimg.com/vi/vci9-PFtvwg/mqdefault.jpg)
![[HOW TO: Rig a Speargun that comes with the reel]](/img/tr.png)
Thanks for the excellent tips Rob. Rob Allen reels are the best!
Happy to have found this as I’m just fitting a reel to my little gun
Excellent little video very informative, thanks!
Thanks. That's really helpful. Keep on with the good work.
Thanks for that 👍
I just purchased a 1100 tuna . Your reel . First time owning one . I used Abbiller for ever . I’m excited to use it. Thanks for the videos
Enjoy 👍
yeeew upgraded the Scorpia 1000, thanks for the vid made it super simple set up
Great video! Like the hint at the end
😁👍
Thanks ! This video is perfect.
You are welcome.
Aula! Parabéns! Obrigado!
It´s nice!
Salute do Brasil
excellent video. going to set up a caranx vecta combo.
\®/Salute do Brasil Master Rob!!!
Awesome video! I started asking a couple of questions in the comments before finishing the video, and you ended up answering both those questions.
I've never spearfished and just got a Mares Viper Pro World Champion 100 in a trade. It's set up with the reel line directly to the shooting line with a swivel and was wondering if I needed a bungee, and I was also wondering whether it was ok to double wrap and have the reel line going over the line release.
Thanks for clarifying both!
Many do tie direct to the spear because you can then have single or double wrap, you decide what you need. Another option, when shooting very close like in a cave, you can set up with no line going back to the line release. This enables you to pull back on the spear to get the fish away from the cave. The only disadvantage with this method is that there is no way to disconnect the spear without cutting the shooting line. It's a good option to sometimes be able to push the spear right through the fish and pull the line out then re connect.
Legend.
Many thanks.
Good vid
nice vid
Good..I like look you do it
Can you buy that line already on the reel, or?
Thx for the video I had a mako gun and there was only one video that showed how to but it wasn't any good :b
Hi! Why do you prefer the shackle as a guide instead of the screw on??
That was REEL good
Do the reels come with line already in them
hello, please best configuration of sandows for tuna 130? thanks
Where can i buy that reel from thats come with line?
I just bought a ex carbon gt roller and a vet a reel. The Ubolt that came with the reel does not fit the notch on the roller. Any idea as to why?
good video!!! Bye
I have the tuna reel gun and I cut the shaft line by mistake . Can I still use the same reel line and attach it to the shaft? I have the rob allen spectra line for reel would it work
I would say so as long as it's a good knot and u still wrap the shooting line like normal. But keep in mind if there no clip and u can't get the shaft out u will have to untie/cut the knot
Hi Rob do you know the diameters of the vecta2 handle please? I got a cuttlefish barrel on the way with 26mm inner and 30mm outer diameter and want to get the vecta 2 handle with the vecta reel attached on it but unsure if it will fit? Any help would be highly appreciated!
Our handle needs a 26.5mm Id. The barrel wall thickness that is best is 1.45mm
Is it possible to tighten the drag so the gun behaves as if it wasn't rigged up with a real
angus laut yes
You can order is from the channel where it.
Im looking to upgrade from my ab biller 36 special to one of your rob allen carbon tunas but I'm not sure what size would be best for me. Want to hunt Cobia tuna wahoo. Will be using the band pull assit to help since I'm short armed. Pls help
A 1,3m is a good size. If you are in the USA, contact Greg Fonts greg.fonts@gmail.com to confirm.
for what is that little blue sling where you attach rope? what is it purpose?
Marino Kolombo when you shoot and miss it has a bit of stretch so that the pull of the spear is not as hard
Hi, wheres the best place to order either of the line guides? USA option please. Thanks for a great gun! Just got my snapper 1100 in the mail. I must say it is pretty epic!
Try Vanessa Fonts on vanessa@tritonx.com
Domo arrigato!
Yes. 1,8mm dyneema at 60m or, 1,5mm dyneema at 90m or, 2mm polyester at 55M. The dyneema is white while the polyester is black or orange.
+Rob Allen whats the breaking strain of each diameter
Hi Rob,
I couldn't find a break-test of a slip knot, would be nice if you test it!
Which slip knot are you referring to?
@@RobAllenSpearfishing just the one you're using in this video, to tie the dyneema from a reel of a reel gun.
@@lxSouthParkxl OK just to be clear, the slip knot between the end of the reel line and the join to the mono shooting line? There are 2 options here, single wrap and double wrap.
@@RobAllenSpearfishing yes that's the one. I thought of a double wrap as that's what u recommended to use
@@lxSouthParkxl We did a load test long time back and the double wrap protected the mono better. I do remember the mono broke both times before the Dyneema but the double wrap did allow the mono to only break at a much higher load. I will do both and video it this time, not sure when it will go up but it is on the list, thanks for the suggestion.
how much for this gun with all parts ..can any body tell me please i want this gun
Fiddy bucks
Can I buy the reel with the line on it?
Hi Bryce, sorry for the delay in answering, yes you can.
from where can i find to buy that shackle and whats the exect name of it pls and thx
It depends where you are in the world, either from us or a distributor.
@@RobAllenSpearfishing But now i checked my pseargun cause i have the beaichat 75 and i dont have that hole what can i do please
@@ayrtoncoleiro4028 I can't help, I don't have a Beuchat gun in my factory to compare.
👌🏼👌🏼👌🏼👌🏼💪💪💪🤝🤝🤝
PLEASE, how can i get your dyneema in Tunisia? please help me
We can supply you from our store in South Africa. Please email sales@divefactory.co.za for a price.
@@RobAllenSpearfishing thanks, message sent to the mentioned adress
Hi Kyle, Depends where you are in the world.
hola cuanto es el valor del arpon que muestras en el video
+luis jose alfonzo alvarez alredor $200-$300
I miss the part where the line attaching to the shaft.
Rob , i do really think a reel line mount directly to shaft line without any Swivel is not a good way ...what ever line you use . ( IMO ) b rgds
No problem Marc, but why do you feel it is necessary?
@@RobAllenSpearfishing to avoid the dyneema line to be twisted on itself = becoming a difficult line to use after it is twisted // to avoid the reel line ( nylon ) to be bent to a point where the line is difficult to be not pinch out ( damaged ) especially if pinched out before the sleeve on the mechanism side ...( difficult to reload in the trigger ) ! any way this is not a critics as i always load a Pigtail swivel on any from my brand spearguns , but a point you should consider ...
@@z1tazzz we fit clips with swivels as standard but some chose to remove. Yes it can twist up occasionally but I don't see it as a problem. If there is twisting, just let the spear hang a moment to untwist.
@@RobAllenSpearfishing yes sure Rob , me i know ...about to untwist , i was thinking for clients ...rgds
What brand is rubber
We only use Primeline. It is now all branded Rob Allen.
@@RobAllenSpearfishing Is it soft or soft in clouds?
rob hi im shannon i love how your guns work but cant get one where i live im from trinidad and tobago please help me get one to fit me and my pocket
Contact Mustaq Mohammed on mustaq@msmartstudio.com
thanks rob
rob i tried but im nut getting through
shannon chance
I assume they are maybe away the week end.
Хорошее ружьё, единственный минус это то что нет упора. Когда я заряжаю такое ружьё у меня остаются синяки. Неужели тяжело сделать упор?
Please send pictures, it should not be the case.
Can you send me a rob Allen gun? Lol
Doesn't hurt to ask
Only one 😜
@@RobAllenSpearfishing That's good enough!!!
@@Takour1 If you are asking a question, yes it is good and strong enough.
@@roballen1578 Yes, indeed it is.
Missed the part where the reel attaches to the gun...
Jose Moreno it just slides on the harder you push it on the more solid it will be
No sense of a bungee when having a reel with advance - it will shock absorb better than the bungee anyway.
Agreed.
@@RobAllenSpearfishing What does "A reel with advance" mean?
Thanks team.
@@robertrodriguez391 Sorry, I don't understand the question? This was done 8 years ago, I can't seem to fine where I may has used that term, please elaborate.
@@RobAllenSpearfishing yeah fair enough! Alex The Truths comment " No sense of a bungee when having a reel with advance - it will shocked absorb better than bungee anyway."
I wanted to understand What his comment meant that you agree with. That's all :)
Hi Robert, I saw a response from you but it did not show here? All good, I should have read the above response to see what you were referring to. I assume "A reel in advance." means it will act like a bungee and let out line "advancing" the line in the same direction the spear is pulling when fired. I agreed more to eliminate the bungee as well because it is just another link in a chain. The bungee is there to keep tension on the shooting line but now the reel can be adjusted to do the same.
Useless video... talked about wverything except on how to attach reel to gun... do you drill screw holes on to the gun? Wont that damage gun? How do you do it without damaging gun? Disapointed
I dont think it will damage the gun if u dont over do it.
Then u can use some seal to prevent the water going in