Vlog 44 | How we FIXED cctv video loss or no video problem? | CCTV repair | CCTV FREE TUTORIAL

This video is about how we actually fixed cctv video loss or no video problem in our own real project?. Here, we showed the possible causes of video loss as well possible solutions. We also mentioned some tips and tricks that are very usefull for day to day cctv installation, repair and maintenance for cctv with loss video and no video problem. Said tips and tricks are important tools for a cctv installers that save them precious time.
Enjoy and have good time watching. If you like this video, Please Subscribe, like, share and comment for a more interacive community.
FB Page / ojimaxss
Website: ojimax.jimdofr...
Email Address [e-mail]
#howtorepaircctvvideoloss #videoloss #howtofixcctv

[@OjimaxCCTV]

Sa mga Subscribers ko na gustong mag order WHOLESALE price, text nyo lang ako sa 09772575573, Especially sa mga taga isla or tawid dagat, at kahit saan lupalop ng Pilipinas na abot ng delivery courier. Turuan ko kayo mga secrets sa installation and setup. Analog cctv, digital cctv, wireless cctv, cctv via fiber, etc. By Ojimax

[@ramojballitoc9538]

sir same ba if lost connection ang display?

[@OjimaxCCTV]

Alin ang lost connection? Pag display cable, wala talaga display sa monitor. Pag lost connection ang power at data, no video display ang camera

[@amenodinbalindong9128]

Sir, paano ayosin yong DVR DAHUA Ang naka display sa monitor ay NO SIGNAL

[@OjimaxCCTV]

Start with changing the display cable first.

[@realprojecttools9127]

If all 16 cctv cameras says NO VIDEO but the DVR is working (can still replay via app recordings) what could be the problem?

[@OjimaxCCTV]

Better check your settings on live viewing on your monitor. I think its disabled.. If it says "NO VIDEO" maybe, your camera power supply is turned off or defective and what you are playing back are your previous days records.

[@susanangolluan8701]

Good days sir ask po kung paano ibalik ang cctv record after ng power interruption.nagrestart Yung Monitor pagktapos mag re start nawaln na ng record pero may viewing name.tnx sir
God bless

[@OjimaxCCTV]

1st, try to reboot your dvr/nvr, occasionally, recording normalizes after a reboot.

[@williamllanita5323]

Sir ano po gagawin pag sobrang layo ng wire? Di po kase gumagana yung video.

[@OjimaxCCTV]

Pag analog, use amplifier, pag digital ip cam naman use poe extender.

[@rhenmarc8031]

nag rerecord padin ba yan sir?

[@OjimaxCCTV]

Yes, pero black lang sa playback

[@marymaypagaduan4955]

Good day sir, ano po possible cause and solution nag stop recording pero ang naka appear sa monitor ay yung last na kuha? Thanks. Hope manotice.

[@OjimaxCCTV]

kung may playback pa, it meanns, good ang hard disk drive mo, baka naka turn off or baka naka scheduled recording ka. Turn on if that's the case. Check the date and time as well

[@marymaypagaduan4955]

@@OjimaxCCTV how to turn on sir? Dvr.

[@OjimaxCCTV]

Look for record settings that says record on or record off, usually its a box, you need to check or put tick mark.

[@marymaypagaduan4955]

Kailangan pa po ba sir pumasok sa ip address?

[@OjimaxCCTV]

@marymaypagaduan4955 No need, just try to look for record settings

[@leahcasuyon4931]

Gumagana paba kahit no vedio

[@OjimaxCCTV]

Kung sira ang monitor, wala lang display kaya possibly gumagana pa cctv. Pero Kung dead set ang dvr or camera, hindi na gumagana cctv.

[@CHAMVERTV]

Miron kaba store sir

[@OjimaxCCTV]

Yes sir, sa Laguna