WR250R FMF Q4 Exhaust INSTALL + EJK, WR250R Mods
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2024
- Parts and Tools list below👇. In this step by step tutorial we are going to show you how to install the FMF Q4 exhaust with the Electronic Jetting kit and AIS Delete Kit on a Yamaha WR250R. I hope this video helps!
SUBSCRIBE and CLICK that BELL to make it RING for the LATEST EPISODES 🙌
👉 / joelwallisadventuresun...
👀 Check out the how to do the WR250r Air box Flapper Mod
👉 • Yamaha WR250R Airbox F...
👀 Check out how to adjust WR250r Suspension
👉 • How to Adjust Yamaha W...
Parts:
🔥 FMF Q4 Exhaust for WR250R
👉 www.fmfracing.com/Product/Pro...
🔥 EJK Electronic Jet Kit WR250R Fuel Controller, Part # 9310207
👉 www.electronicjetkit.com/dirt...
🔥 12oClockLabs Exup Emulator wr250r
👉 shop.12oclocklabs.com/index.ph...
🔥 AIS Delete Graves Block Off Plate Yamaha WR250R
👉 www.revzilla.com/motorcycle/g...
🔥 Wolfman Luggage Heat Shield HS402 Kiowa ll
👉 amzn.to/3eFte4g
Tools Needed:
🔥 Ratcheting Wrench
🔥 8mm Socket
🔥 10mm Socket
🔥 4mm Allen key
🔥 5mm Hex Allen Key
🔥 3mm Hex Allen Key
🔥 12mm Wrench
🔥 Large Phillips Head Screwdriver
🔥 Flat Blade Screw Driver
🔥 Magnetic Parts Tray
👉 amzn.to/3f0Fi0v
🔥 Labor Saving Devices Magnet Noodle
👉 amzn.to/3eDHTgs
🔥 Slip Joint Pliers
👉 amzn.to/3rp7sah
🔥 High Temp Silicon
👉 amzn.to/3zlCjXV
(The products above may contain affiliate links which gives me a small commission when you purchase, there is no additional cost to you. This helps support and allows me to continue making these videos. Thank you in advance for your support!)
If you found this video helpful or entertaining please SUBSCRIBE for more adventures, DIY tutorials, and product review videos 👇
👉 / joelwallisadventuresun...
Or if you REALLY 💙 my adventures and DIY tutorials and would like to SUPPORT my gear and adventure funds to grow please visit the PayPal link below to donate👇 🙏.
👉 www.paypal.com/donate?busines...
Chapters:
0:00 Introduction - Part List
1:56 Tools Needed
2:37 How to Remove WR250R Seat
3:08 How to Remove WR250R Fairings
4:08 How to Remove WR250r AIS System
6:43 How to Install Graves Block Off Plate Yamaha WR250R
7:42 How to Remove WR250R Exup System
9:17 How to Install 12oclock Exup Emulator WR250r
9:55 How to Remove WR250R Stock Exhaust
11:34 FMF Q4 Heat Shield - Wolfman Luggage Heat Shield
15:22 Weight Difference, WR250R Stock Exhaust VS FMF Q4
16:02 How to Install WR250R FMF Q4 Exhaust
20:56 Sound Test WR250R FMF Q4 vs Stock
21:46 WR250R Air Box Flapper Mod
23:56 How to Install WR250R EJK Electronic Jet Kit
27:19 Test Spin with New WR250r Aftermarket Parts
#wr250rmods #wrmods #wr250rhowto #fmfyamaha #wr250r #wr250rdualsport #wrrdualsport #wr250rmoto - แนวปฏิบัติและการใช้ชีวิต
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 6](http://i.ytimg.com/vi/CVUx09Rx0-M/mqdefault.jpg)
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
![[TH] Esports World Cup : Grand Final](http://i.ytimg.com/vi/sedbKhFYDMo/mqdefault.jpg)
This is exactly what a "how to" should be! EXCELLENT ! After 6 months of waiting finally got an Q4 pipe...Can't wait to get started on this !!! THANKS GUYS!! Definitely will make the job easier !!!!
Thank you Ron, glad to hear my how to video will help for the install :). Congrats on finding the fmf pipe! I know those are super hard to find right now!
where did u find one ron
Superb video. Thanx for the content!!
Thanks guys. I was actually trying to reinstall the whole thing back to stock (exhaust was way too loud) and this was easily the best video I'd watched on it. Between this video and the manual it was very easy. Thanks!
Great Vid! Best explanation of mods install I have seen yet. Kudos!
Awesome! Thank you for the positive feedback!
Great video my man. I've been looking for this for a while. Snatched up a 2020 wr last year. Will be doing everything you showed on here. Keep it up.
Thanks dude! Congrats on the WR! It’s a nice bike :) hoping to get back to riding this spring and pump out some more content
Thank you for an excellent demonstration and how to do this job. I watched several how to videos before I started, but yours was the best that I found. I chose to go with the Yoshimura slip on Exhaust and the Dyno Jet Power Commander 6 fuel controller.
Your demonstration showed me that I could do this modification. Keep up the good work.
Thanks
Very good video. Great detail. Thank you. I'm mod'ing this weekend with a yoshi, ejk, exup-elim. Great idea on the foam at the flapper.
Nice!! Going to be a different bike once your done 🤘
Quality vid
wow very detailed video great job
Thank you Jesus 🤘Happy riding!
Perfect video. Step by step was easy to follow. Doing all this plus the powerbomb header on my 2015 WR250R
Awesome glad to hear. Powerbomb header sounds awesome!
@@joelwallisadv it also looks really nice when it gets aged gets a color coating patina like firearm case Hardened receivers
Well done! Great tutorial
Thank you Raffi 🙌
Great vid, especially the close ups. I managed to score a new FMF plus the megabomb off eBay. Did all these mods in about 3hrs, and it makes a great bike even better. Only pain was uncabling the exup. Left flapper stock
Nice! I heard it’s rough out there finding the FMF pipe and happy to hear you were able to obtain one and got everything installed 🙌🤙
Yeah, I did the same stuff on my 2011 X I still love the bike bought it new
Hell yeah 🔥
I have that same exhaust and a tuner on one of my WRs. I agree completely, smoother and more responsive power delivery, and louder. Additional power? Meh...maybe, but whatever, it has enough anyway for the dirt. The brap is great, but original stock quiet is nice also. Oh hey we went to Tahuya finally a few days ago and didn't really enjoy it for all the round rock and gravel everywhere (plus cranky from all the heat). Funny enough had a bike break there also---fuse blew and would not allow the starter to turn. Fortunately we didn't have to tow it back LOL. Much prefer Capitol Forest for dirt riding over SlickRock-huya.
Nice! Sometimes the FMF can be a little loud but I dig it. On my 08' I only had the FMF Q4 pipe and recently added the AIS delete and I notice my biked was more responsive. After riding Adam's I can tell a little bit of a difference with having the EJK. Might end up doing it later down the road...
I keep hearing everyone talking about Capitol Forest. Will have to go there next and check it out as we are not a big fan of rocks as well. Have you been to Walker yet? That place is rocky as hell LOL
@@joelwallisadv yeah I have been to walker valley. It was rocky, but the rocks weren’t round and horrible like Tahuya! Some very difficult single track that was uncomfortable, and others simply beyond my abilities. I’m ready to go back to Capitol Forest, loved it so much, challenging without being a killer. I like getting out of first gear lol. Loved it almost as much as central Washington or Oregon stuff I have done. Big roads, great single track, mile after mile, nice views, beautiful forests.
@@darrellhay ok sold on for sure going to capitol forrest cause I love riding in central Washington. Thanks for the good intel mate!
I found it easier to remove the little bracket for the side pannel
Great video, as always! Is he still using the same settings on the EJK? Thanks
Thank you! Adam has been using the same setting on the ejk but he just sold his bike due to he moved and couldn’t take with.
Was there a gasket on the stock pipe?..I did not see one in the video. I am atempting to go back to stock.
I am a bit concerned without the AIS I will have introduced backfire popping to the stock muffler> Of note, there was a treaded clip on the FMF when I took it apart. I would think that would be suppied as the FMF muffler did not have a threaded connection. your aftermarket muffler sounds not as loud as the one Im replacing. I would leave the one Im trying to replace if it sounded like yours.
Hi. Again, where did you get you emulator? My Yamaha is 2020 WR250R I been looking places no one please.
I just bought a wr250x. Previous owner(s) already did all these mods to it. I was wondering what the block off plate was for by the exhaust port lol. They also did the mechanical cam chain tensioner mod and also added a speedohealer.
Do you still have the X I have one I bought in 2011 new
@@darylhill9400 Oh ya. I think its one of those bikes a wont sell for a very long time. Lightweight hooligan/wheelie bike thats reliable, easy and cheap to fix
@@lomparti yeah, they are impressive. Actually, I even take mine on the freeway.
after watching this video i decided to keep my stock exhaust.
Thank you so much for sharing! I am looking to buy the exhaust but can't find one. Where did you get yours? As well, do you have any suggestions about what to start with? EJK unit or FMF first?
I think the pandemic made them hard to find plus since the wr is no longer in production manufactures are not making them anymore is what I have heard. If you can find one I’d start with the fmf pipe, ais delete and the exxup all at the same time.
@@joelwallisadv Thank you so much!
I had the same problem. Found this recently. shop.gprexhaustsystems.com
Great video! A question: What size was the replacement bolt you had to purchase from the hardware store? My fmf pipe arrives in 2 weeks so I'm getting prepared. Cheers!
Don’t remember the size. Hopefully fmf caught that right away and you get the right length. Enjoy the new exhaust!
I used an M8x20mm with a washer. Was just about touching the pipe. Ideal length would be a bit shorter, but maybe that's why FMF still provides a too short bolt (15mm?)
Awesome! got it all squared away! Thanks y'all!@@MotoMeeple
The flapper mod isn't done properly. He blocked off the airflow created by removing the valve and taping down the door. It doesn't sound like he plugged it with the foam just for the video since he said he keeps the foam in there to keep out dirt...he'll succeed in keeping out air and choking it off, also.
I’ve heard mixed reviews about the ejk.
Is it still working good?
I was thinking about going with altitude industries but they are really bad with customer service. The altitude industries programmer is the same as the fmf programer.
Thanks for the upload.
Still working good and zero issues so far
@@joelwallisadv Cool thanks
I just installed exactly the same mods on my 2009. I'm finding when riding if u let go of the throttle and quickly get back on it the bike has a bad hesitation. Can I remedy this with my ejk controller? Any tips.? Thanks
You may need to adjust the mapping on your EJK depending on your elevation is one thought that comes to mind
Hi! Thank you for the video and information. I did just replace my exhaust for a FMF I finished but now my engine light is on. What could be please need help. Thanks. I don’t have the emulation I need to buy it.
I think you need the emulator to solve the check engine light. Can’t remember where we got it from as it was awhile back.Maybe revzilla.com
@@joelwallisadv yes I do need the emulator I can’t find it anywhere. I been calling places no one have it. Thank you. Let me check Rezvilla I think my husband did last night let me doble check. Thank you for the information
@@joelwallisadv sorry for asking again, what year is good wr 2020? Thank you
@@Jm_Cosmetics all the years are pretty good. I know the early years had the fuel pump issue but have even seen that in the later years
@@joelwallisadv thank you! I do appreciate it you time and information.
Do you have any difference between EJK and POWER COMMANDER PC?
I don’t. Just the ejk
thats probably not the way this torque wrench was intended to use :D
Do you think it’s is necessary to get the ECU/EJK? I just installed my q4 and my bike is idiling higher than normal so I’m concerned
Sorry to hear yours is idling high and not sure why. No I don’t think the ejk is necessary. I have the Q4 on my 08 without the ejk and runs fine.
Did you do the Exup emulator?
I wish I could get a FMF for my bike, they are sold out all over the place.
Totally! Bummer that fmf stopped making them. Hopefully one surfaces to the market and you can snag one up 🙌
How have these mods changed the mpg?
Gets about a couple miles per gallon less then stock.
Where did you buy the Exhaust.
About little over a year ago
Who know the manufacturer of the head of fork ?
Where did you buy the emulator? Please can’t find me anywhere. Thank you. Anyone here on the chat can help me out. I will appreciate it. Thank you.
Grace performance has them
My 2020 wr250r has a little can next to the flapper...what is that for
I believe the part you are referring to opens the air box flap when you accelerate. This link below for removing it for the airbox flapper if you want to remove it th-cam.com/video/ZZ3P6lTYiDo/w-d-xo.html
@@joelwallisadv no its a little black cannister with a vacuum hose and I'm just curious as what it is for
@@gabrielkopp2036 I’m not to sure without seeing a pic of it
@@joelwallisadv its on your wr as well
@@gabrielkopp2036 lol I’d have to take my seat off
Why go through all that trouble just get a yz250f the cross country version and just add street kit
Good vid. I have same bike and did the same mods but I read the flapper helps with low end torque so I left it in and she runs pretty strong. What are your thoughts? th-cam.com/video/qruM24Ifrw4/w-d-xo.html
Thanks man! Glad you liked my vid :) I personally didn’t do the flapper mod but my friend did. I can’t tell much of difference between our two bikes. Nice drag race btw :)
Too bad the FMF exhaust for the WR250R are non existent these days
Absolutely. Serious bummer :(
I talked to my mxstore online and they said they stopped manufacturing due to covid but they will be out by march
@@MultiMates7 🤞hopefully they start manufacturing again. I heard rumors they stopped due to the wr is discontinued. Let’s hope it’s cause of covid and they make them again 🙌
Go with big gun
Take that foam and put it to your mouth and try to breathe through it. It isn’t going to flow any air.
What a nightmare, I should've spent the money and not got a bike that's basically unrideable unless you throw thousands at it!😢
What?! The WR is still an awesome bike even without these mods. They last for ever like a Toyota or Honda car.
this is way too much lol not worth it
great video though thanks for making this
With mods like that, you'll be going 30 instead of 25. Slow down speed racer!