How to Replace Neutral Safety Switch 2003-2011 Honda Element
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2024
- Buy Now!
New Neutral Safety Switch from 1AAuto.com 1aau.to/ia/1AZNS00704
This video shows you how to install a new neutral safety switch in your 2003-2011 Honda Element. The neutral safety switch is a safety device that does not let your vehicle's engine start unless the transmission is in neutral. If the switch is malfunctioning, or failed, you may not be able to start your vehicle!
This process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element
Tools you will need:
• 10mm Socket 1aau.to/oaPj/1AXAA00017
• 19mm Socket 1aau.to/o36/1AXAA00043
• 1/2 Inch Impact Gun 1aau.to/ooc/1AXAA00252
• 3/8 Inch Impact Gun
• Swivel
• Floor Jack 1aau.to/oRs/1AXAA00068
• Jack Stands 1aau.to/oL5/1AXAA00065
• Pick 1aau.to/oER/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Clear instructions and video. I just did this on my 2011 Accord. I was able to disconnect the plug, but found it easier to pull it apart (plug from the unit) after I removed the bolts. Easy to do, finished in about 20 mins.
Thank you for the video. It took a whole month for the mechanic I went to to find out what was wrong with my civic, and I paid $450 + towing which was an additional $110!!! for something I could of done myself.
How does this channel not have more subscribers?
On my 2005 E, I didn't get past the 10 mm cover bolts. The 10 mm socket just spun on them... rusted down in size?. I don't have a good impact tool and I'm afraid of stripping them with my ratchet. We are going to the pros and will appreciate their skills. TH-cam usually makes it look pretty easy compared to the real world. Thank you for the video regardless.
Look very simple, thx so much 👍
Outstanding video, clearly done and explained.
do you need to remove the battery connector before you start replacing the switch?
Is this the same spot for a 2002 civic ex
Change on an 04 accord. Followed these steps but now the neutral light is not illuminated on the dash when in neutral. Every other gear illuminates, but N. Car is on neutral because I can push it still just wondering why?
So it’s also called “gear position sensor”?