Learn AutoCAD 3D right from scratch with full-length courses, instructor support and certificate all for one Subscription here sourcecad.com/courses/autocad-3d-beginners-course/
I work at a factory that makes precast concrete elements. When we have an order including 1/2- or 1/4-turn stairs, I use the guide function alot, as each side often has a different amount of edges on the bottom. If the number of edges are unequal, disregarding this will make the face twist on itself. I draw lines from side to side, making triangles where I want 2 end points to meet at a single point on the other side. As I use the 3D model to calculate the volume and weight (mass command), it is important that the model is as accurate as possible. I DID learn a few new tricks here, so I'll try to explore them next time. :)
Bro nice 👍. Can you show how to make plastic bottle thread. I made , but don’t know how to draw starting and ending if thread in 3d. I mean how a thread start Marge with bottle?
thanks for this information, how can know after drawing the rectangles in which face they are, is there any way to know, for example, if i select a rectangle and go to properties, how can i know this rectangle in which face. Thanks in advance
Hi, just curious to know what happens to those path lines after creating, it will be deleted automatically or we've to manually select and delete them?
Nice lecture about LOFT command but one thing I felt is, how to make shell in that geometry after being lofted?, Please sir guide us about how to make hole or shell. Thanks
When I select the circles in order there's nothing change happen..after using loft there is nothing happened with the circle..why is it happening ? Can you plz tell me any solution for this ?
+geo summerholder that should not happen! try deselecting every geometry and then select only smaller circle and make sure you follow Z axis as shown in video. Let me know if issue persists
+SourceCAD i select only the small circle,when i move it up on z direction all geometry shapes movie up. maybe is a problem of my autocad 2016 version i dont know.
there can be many reasons behind this like you might have grouped all objects together or you may have created them as a block, try to explode this geometry and then try it for exploding select geometries then type X on command line and press enter
I have rigorously followed your instructions for using the loft tool, but I am not able to get it, inspite of my best efforts. Could you help me out. / N.Ramaswamy
Learn AutoCAD 3D right from scratch with full-length courses, instructor support and certificate all for one Subscription here sourcecad.com/courses/autocad-3d-beginners-course/
I work at a factory that makes precast concrete elements.
When we have an order including 1/2- or 1/4-turn stairs, I use the guide function alot, as each side often has a different amount of edges on the bottom. If the number of edges are unequal, disregarding this will make the face twist on itself. I draw lines from side to side, making triangles where I want 2 end points to meet at a single point on the other side.
As I use the 3D model to calculate the volume and weight (mass command), it is important that the model is as accurate as possible.
I DID learn a few new tricks here, so I'll try to explore them next time. :)
Excellent tutorial!! Very detailed, clear and easy to follow. I found this very useful, much better than other tutorials out here. Thanks.
Welcome Tim
@johan fasth , Yes you can make MINOR changes in loft geometry like changing curvature at cross sections but no major change can be performed on it.
thank you 4 your tutorial ........ i LIKE IT .......👍👍👍🙏
Bro nice 👍. Can you show how to make plastic bottle thread. I made , but don’t know how to draw starting and ending if thread in 3d. I mean how a thread start Marge with bottle?
very helpful tutorial with all important information ... nice work brother keep it up :)
Thanks very much ,fees dekar bhi itna sikhaneko nahi mila
thanks for this information, how can know after drawing the rectangles in which face they are, is there any way to know, for example, if i select a rectangle and go to properties, how can i know this rectangle in which face. Thanks in advance
Hi, just curious to know what happens to those path lines after creating, it will be deleted automatically or we've to manually select and delete them?
Nice lecture about LOFT command but one thing I felt is, how to make shell in that geometry after being lofted?, Please sir guide us about how to make hole or shell. Thanks
When I select the circles in order there's nothing change happen..after using loft there is nothing happened with the circle..why is it happening ? Can you plz tell me any solution for this ?
How to make arc using polyline?
after doing loft command it do disappear the lifting order
Very good
Sir twice click karna h ki ni
1:45 i got a problem friend when i select the smal circle and try to move it up all the shapes move up. why that happens?
+geo summerholder that should not happen! try deselecting every geometry and then select only smaller circle and make sure you follow Z axis as shown in video. Let me know if issue persists
+SourceCAD i select only the small circle,when i move it up on z direction all geometry shapes movie up. maybe is a problem of my autocad 2016 version i dont know.
there can be many reasons behind this like you might have grouped all objects together or you may have created them as a block, try to explode this geometry and then try it for exploding select geometries then type X on command line and press enter
is there a way to use LOFT in 2d modeling?
No, loft command can only be used for 3D drawings
most of the time when i make a path it says it not valid
your great sir
Bro it's not working in autocad 2007
idiot. in 2017 . you are looking for 2007....
I have rigorously followed your instructions for using the loft tool, but I am not able to get it, inspite of my best efforts. Could you help me out. / N.Ramaswamy
Ramaswamy Narayan what exactly is the issue you are facing while using loft command?
very nice