Gate motor installer Birch Achers Kemptonpark Pottie 083 778 2288

When it comes to steel sliding and steel swing gate automation, then there is only one gate motor that stands out high above the crowd.
These are the Centurion evo range of gate motors.
The well known sliding gate motors in the South African market are:
Centurion d5, Centurion D5 Evo, Centurion D10
The newer Centurion Smart gate motors has also seen the light in the last couple of years.
The Gemini 12 volt slider and 24 volt slider gate motors
The older Hansa Speedo 24 volt sliding gate motors
The Newer ET drive 500/600 sliding gate motors
The DTS 512, Expert sliding gate motors to mention some.
Centurion gate motors are like Toyota engines, they seem to last forever, but at the same time, they are also stolen on a daily basis.
Therefor installers needs to take action to prevent their gate motors from being stolen and as such, losing a client to the insurance.
Through 18 years of installing gate motors, Exquisite Security has seen how the gate motors have been stolen.
It is a known fact, that installers are stealing their own gate motors to fit them with new clients.
Due to this, we have devised aspects, which we bring in, to prevent our clients gate motors from being stolen.
In the beginning we just welded angle brackets, but this did not prevent thefts of gate motor parts.
Since then we have installed most of our gate motor with anti theft brackets.
Two types of anti theft brackets do exist.
Centurion anti theft brackets were found, not to be the best on the market.
The generic type anti theft bracket was found to be much stronger compared to the Centurion anti theft bracket.
Centurion systems has since launched the version 6 anti theft bracket, but the costs of fitting these are very high.
Exquisite Security has also found, that the generic type anti thefts brackets can be modified to suit/ prevent thefts.
A true gate motor specialist/ expert installer should be able to repair a centurion gate motor on site.
There should be no need to remove a gate motor for a service.
Exquisite Security have stripped down centurion gate motor to the core more often then not. We know the gate motors inside out and as such, if we cannot repair your centurion gate motor on site, then you know its time for a new centurion gate motor.
Currently we have found that:
1. Burning the gate motor serial number out on almost every part, does assist in prevention of thefts of our fitted gate motors.
2. Welding the steel nuts that hold the gate motor down, means one cannot unbolt a centurion gate motor fitted by Exquisite Security.
3. Welding steel angle brackets onto the anti theft bracket ears, means that more metal is present, which will delay you in the theft attempt of our fitted gate motor.
4. Gate motor installers cannot remove our gate motors and hold clients hostage.
5. In order to remove our installed gate motors, it needs to be cut off via a angle grinder, which should make some noise.
6. Should our gate motor be stolen, and one is caught, the owner can be identified.
It is not only Centurion gate motors which we weld down like this.
Gemini slider gate motors are also commonly stolen, and as such we have made some strides to prevent thefts of Gemini gate motors as well.
So, if you are looking for a gate motor installer, expert, specialist, then look no further.
Exquisite Security is your gate motor specialists.
Upgrading, repairs, troubleshooting of all types of gate motors.
Exquisite Security services the whole of Gauteng.
We strive to be better, and we are proud of our installations and the work we perform.
Contact us today for fast, friendly reliable and guaranteed repairs and workmanship to your automated gate motor system.
Contact Pottie 083 778 2288 or Amanda 083 719 2250
Check us out on www.exquisites...
Our gate motor section/ page is
www.exquisites...