Dynamic Compression Plate (DCP)- Correct Operative Technique
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Plates and screws are commonly used in Orthopaedics while treating a fracture. Correct use of AO technique is important in order to get a good results.Incorrect technique can lead to failure or sub-optimal results.
This video demonstrated the correct technique of using Dynamic Compression Plate. It also talks about Small and Large fragment sets.
Watching this video is a must if you are dealing with small and large fragment set.Its a must watch video of Orthopaedic surgeons especially doctors in training.
really amazing sir...thank you so much for the effort you put in sir
Thanks Karan. Please subscribe and share our channel so that it can reach wider audience.
Excellent video sir. I had to read so many books and still could understand this concept only while finishing the residency. You have made it so easy to understand quickly. Great service to the learners.
Thank you
Sure. Thank you.
An excellent demonstration, Sir! So clear and precise explanation did'nt find it in many Orthopedic books. Thank you so much.
Thank you. Kindly subscribe and share our channel.
A year of reading on one side and a 20 minutes of video on an another side !! Thank u sir :-)
Thank you Vijay.
Hi sir... great video...I m following your videos from many days...u r doing great job......how to contact you
Thank you
Gonzalez Christopher Rodriguez Jeffrey Rodriguez Betty
🙏
Thank u sir
My pleasure
dear Dr my femur was broken.approximatly 2year ago .24.05.2020. surgery by nail but now nonunion.i want to take valuable opinions and get titment from you.pls help me from Bangladesh.
Can't say much without consulting you
Very good evening sir , u r an excellent teacher sir 🙂.
I have a bit doubt sir . Kindly clarify.
(In between 7 min to 8 min )As you said its the plate which moves(in opposite direction from the fracture) while we tighten the eccentric screw .
But I feel its the screw and bone unit which moves towards fracture site for achieving compression.
Pls guide sir
Directions can be confusing
Dear Dr. Vinay,
My name is Dharmjeet Pandey and I passed out from NIMS in year 2015 from then I am in orthopedic segment, I have taken so many lectures regarding Trauma reduction but I learned something different in your video I have seen that you can bring theories in real life so crisp clear that even if a beginner is watching your video he can understand it very well.
Your way of demonstration is totally different than other surgeons, You demonstrate each and everything so well from very beginning till end.
Thanks a lot for making things so easier and bringing theories to real life with so ease.
Best of luck for future, Would like to meet you once I will be there.
Thank you Jeet for your lovely comments. Happy to know you are a NIMS passout. It would be honour to meet you some day.
Excellent lecture and presentation but I think the screw driver for 4.5mm plate is 3.5mm rather than 4.5mm please till me if I'm Rong my teacher.
It's 3.5mm
Excellent sir.pls give some tickcs about reduction of spiral fracture and fixation
Ok
I am from Bangladesh and my question after operation a patient how many times to full recovery,,, dcp operation??
Depends on site of injury and severity
Why it dynamic compression .what donse dynamic means here
Plates moves with bone and creates compression at the fracture.
Wilson Eric Lopez Steven Hernandez Margaret
🙏
Sir, Is there any way to remunerate apart from subscribing.
Ur services to orthopaedics are outstanding.
Iwant channel to reach wider audience so that it can benifit more people.
If you can share it to correct groups then that will be my remuneration 🙏
Sir, maximum how much of compression can be achieved using eccentric screws???
This is meant for fractures were we can achieve anatomical reduction.
Hello sir
I have a doubt
In oblique or spiral fractures..is centric screw should be placed in proximal fragment and ecentric screw in distal fragment?
I didn't understand the angle part sir
Centric screw should be put on the side of obtuse angle so that it forms an axilla so that fracture can get reduced without sliding.
Understood sir...thank u very much sir
Great. That's good. Kindly subscribe to our free educational channel.
Sir kindly upload radius plating by Thompson approach
As soon as possible
Thanks Sir, Sir please tell us details about centric and acentric screws.
It's there
Smith Steven Lopez Brian Hernandez Matthew
😊
Lee Michelle Allen Laura Rodriguez Steven
,😊
Williams Barbara Anderson Amy Perez Carol
😊
Which screw should be used first, the closest to the fracture site or the distal from it?
Dose it make any difference?
No
prebend the plate
Yes you can
Hall William Martinez Ruth Lewis Matthew
😊
Rodriguez Ronald Lopez Brenda Garcia Elizabeth
😊
Sir plate lagane ke kitne din bad hath normally hota h jis layak ham computer keyboard use kar sake normally
Computer key board to operation ke turant bad use kar sakte hain.
Excuse me Doctor, but as per my knowledge this is not DCP this is LC DCP, the DCP looks different
This is DCP
@@DrVinayKumarSingh ok👍🏻 it's confusing even Google is confused 😁
Sir we r taught n read for transverse fracture one should use pre bent plate n proceed as u mentioned 🤔🤔🙏
Yes that's correct. Prebending is good
Sir how excentric screw is compressing
Read basic AO principles
Very helpful video sir. Thank you
My pleasure
Please sir, Make more videos on sets for different procedures
Ok
Great 👌👌👌👌
My pleasure
Williams Susan Young Laura Lewis Paul
👍
Outstanding demonstration of correct placement of DCP. I am a Veterinary orthopedic surgeon and learning a lot from your channel. Sir, kindly tell me in 10 hole DCP, how many centeric and eccenteric screws we have to place for maximum result.
Procedure is same irrespective of number of holes.
@@DrVinayKumarSinghthank you sir
Lewis Sharon Johnson Sharon Lee Kevin
😊
excellent excellent excellen,,, plis subtitulos
Thank you
Hello Dr.this tube that you use.what is this?
It's used by plumber for water connection
SIr what is the idea behind pre bend DCP
To have good compression on the other side
sir, excellant presentation, i think u r d best teacher i hav ever known, i wud request u to make vdo for some of new approaches like postmed approaches for tibial platue fractures
Thank you Jamin.
Thank you Sir, cleared the concept and how to use the eccentric screw guide..
Thank you Raviteja. Please subscribe and share our channel so that it can benefit more people.
Plz for video showing overbending of the plate to compress the far cortex
Ok
Ok
Sir my heartiest thanks to you !!! Simply wonderful !
Thank you Amit. Kindly subscribe and share this channel.
Thank you so much, sir. May I know plate placement areas on radius, ulna and humerus. E.g..volar or radial border on radius bone.
Sir how to prebend the plates?
Will show in some video
Thanks sir.. So helpful..
My pleasure Anoop
Sir kindly make a video for distal femur plating as well
We will do that
@@DrVinayKumarSingh sir i like your videos and keep them watching often for good revision. Thumbs up for your so much good work. Would definitely want to work in future under your guidance if possible. Thank you so much sir
Excellent video sir!
Should the central screw be completely tightened or partially tightened before applying the eccentric screw?
Fully right
Could you present a tutorial on direct and indirect reduction techniques
Thanks Ahmed. Will try to make a video.
R
R
R
R
R
R
R
R
R
R
R
R
Mind blowing concepts
Thank you Farrukh
Hats off. Thanks alot sir
Thank you
sir i have a 7 hole titanium dcp in my radius how much does it cost
I do know the price
@@DrVinayKumarSingh ?? sir ihad my surgery last month when can i ride a bike again?
Hello sir i use to watch your videos for implants surgical knowledge....you always been helpful to us and so many....i have a opinion Sir the plate you are using in this demo surgery is not FDA approved....this is Hygeia brand which has no FDA....this is good for demo only ......kindly use FDA approved implants only.
Lokesh when you operate on poor and deprived people under government health schemes then you cannot think of using FDA approved plates.
Thanks alot sir. U have cleared my concepts. ❤️
Thank you for Farhan
Sir, This is Dr. Kazi Rahman from Bangladesh. I am a fan of yours. I have learnt a lot from your channel. Hope to meet you in near future. If you dont mind could you please share your whatsapp plz.
Thank you. Email me on kneeandhipreplacement@googlemail.com. I will forward you my whatsapp number.
Sir very nice explanation.thank u
Dr.u explaíñ it
Thank you
Effort is commandable. We'll done....
Thank you.
Awesome video …pls make some videos on bridge plating principles and anti glide principles ….
Thank you Adarsh
Hello sir i am from Bangladesh.Excellent Demonestration.So much helpful for beginners like me.I wish i could work under your supervision.Is there any opportunity sir??
You can come for a short term attachment. Email me on kneeandhipreplacement@googlemail.com.
Aweeome sir u r awesome
Thank you Rohit
Really helpful sir
Thank you
Sir, in transverse or oblique fxs...while giving compression...Do we need to make some order of screw placement like ist screw near to fx site always or no sequence matter
Yes order is same.
Thank you doctor
My pleasure
Good demonstration but I want to add one thing if you don't mind if we bend plate at fracture site then fracture will not open posteriorly .and putting screw without bending plate is going to open fracture on opposite sides
I have mentioned your point in the video. Kindly see the full video. Thank you for your valuable input.
Thank you sir.
Most welcome
Excellent sir..i always watch your video before doing a procedure..u r our real teacher..thanks for sharing your knowledge..
Thank you
Nice and new tricks for me about DCP appliance, thank you sir and God bless you.
Thank you
Hi Dr. Singh,
Thank you very much for your videos they are very useful.
Can you tell me if this is correct, with regards to Limited contact DCP and conventional DCP are the differences just that the LP- DCP has of course limited contact with the bone and can still be used in compression mode but has a different type of hole to the DCP and therefore requires a different drill bit guide but still achieves the same results. Is that correct?
Many thanks
Also if so why do they have different holes to each other. When looking at the LP DCP I cant see the need for it to have a different hole to the DCP. Thanks
I would request you to refer AO manual as this is a diverse topic.
I'm out of words to describe your efforts sir, thanks a lot sir...
Thanks Raj. Kindly subscribe and share our channel.
Nice presentation
Thanks a lot
Thank u so much
Most welcome 😊
Crystal clear explanation sir. Sir Keep uploading such videos of all kind of surgeries. Thanx
Thank you for your kind words
Excellent sir. Thanks so much for your effort in teaching us
🙏🙏🙏🙏🙏🙏🙏
Thank you
Thanks a lot sir
My pleasure
great video sir , please make videos on trochanteric osteotomy for THR and acetabular fracture fixation
Thank you Amrit. Kindly kindly share and subscribe to our channel.
Excellent video
Thank you very much!
Sir it ws really a very nice video....sir plz make a video on bending of plates.
Thank you. Please don't forget to subscribe.
Thank you so much . Love your work. Great Videos. Keep going. Greets from Germany. Stay healthy!!!
Thanks Makan. Kindly subscribe and share our free educational channel.
Nice Sir
Thank you very much sir. Can you please do a lecture on basics of plate, screws and nail. Different sizes and all
Nabil i will try.
Superb demonstration Sir ..one doubt sir cant we get compression if we use both screws eccentrically?
Yes as shown in the demonstration. However you first screw has to be centric screw.
Thank you doc
My pleasure Rayan
Excellent. 👌
Thank you
Thanks Sir, for your useful and educational videos
Thank you
excellent sir
Thankyou Nilesh
thanks alot sir.......made my day......please keep continuing such educational videos....
Thank you Syed. Kindly subscribe to our channel and share it.