Buy it here: vparts.se/se/volvo-v70/v70-08-16/reservdelar/belysning/stralkastare/stralkastarlinser-till-volvo-v70-xc70-08-16-s80-06-16-hoger-och-vanster-sa23042510.html
I'm going to install glass lenses from a 2004 XC70 on my 2007 XC70 to avoid having to adapt the harness and newer lights have market bulbs and look better. Which glue do you use? Is there a link for the glue?
You should open a headlight using electric cooker in the kitchen (of course, professionals have special workshop headlight ovens for this). ... Dremel cutting is the first time what I see to open a headlight.... ;-)
@@VPARTSGARAGE I have done one side of my car so I know it is a PITA to do it, yet have you ever tried applying those headlight glue separator after you heated up the headlight? And I believe you may try selling additional kits which retrofit the projectors as you would never ever open the light again in your lifetime... :)
Bro serious question as i dont find anywhere for a fix... I have volvo s80 v8 2007 with BLISS system, sometimes it stops working because there is something on the lens, which isnt true. The lenses became foggy from inside, especially right side. Is there a way to make it clear again or replace the glass?
P2 xenon and abl xenon headlights are much easier to open, done lots of them, even install new rechromed reflectors of the projector, light output is a new…. Sold a lot of refurbished headlight in my country… Did 1 pair of P3 abl xenon headlight, also installed new rechromed reflectors of the projector: light output as new…. Projector lens is very easy to clean, and necessary when you open the headlight….
Thanks so much! We are not a workshop in the sense that we take in customer cars. Now that you've seen the video, you can buy the headlight lenses and do it yourself :) We hope that they will be back in stock at the beginning of 2024.
Once the lens are back in stock this spring 2024 will folks in North America be able to order/ship? Really interested in new lens and the clear/white corner reflectors!
Hello, Unfortunatly we do not ship to NA. The fastest way for you to get parts is if someone you know in the countries we ship to can order and then forward them to you. Sorry for the inconvenience.
Thats fine - I will find someone to relay the parts for me I am sure. Hope to see the lens in stock soon! Could you also advise on what glue/sealant you recommend?@@VPARTSGARAGE
I did this on my 2005 v70 and man oh man this job fucking sucks. Especially much since you have to remove the whole bumper to get the headlights off the car. But using the heatgun and big pliers to force the remaining lens off was a hell of a workout, arm was properly sore afterwards.
@@VPARTSGARAGE Yes, i bought the lens from you guys actually (hälsningar från finland!) They turned out great in the end. i didnt want to do the job initially but when i saw the prices of new xenon headlights i quickly changed my mind.
I think it took about 1,5 hour to complete one side with glue and everything. I have done this job several times, so maybe it takes 2-3 hours the first side for the first time.
Sorry, I just want to better understand the beginning. Are you saying the lens has to be cut open because there are three screws that hold the lens to the outer housing internally?
Lens has to be cut open beacause the glue holding the lens cant be heated to loosen it. So you cut the lens to be able to reach and remove the old glue. :) But you have to be a bit careful around those screws and cut on the right side of them for it to not brake :)
Bought the headlights from aliexpress and worked perfectly, cost me only 52 euros total for both sides. Thank you for the tutorial/video!
Can you share link AliExpress?
GREAT VIDEO I WAS GOING TO BUY A BOTH HEADLIGHTS I WILL FOLLOW YOUR EXACT INSTRUCTIONS
While you are in there, I would also clean up the "eye". As it can only be removed while the cover is off.
Buy it here: vparts.se/se/volvo-v70/v70-08-16/reservdelar/belysning/stralkastare/stralkastarlinser-till-volvo-v70-xc70-08-16-s80-06-16-hoger-och-vanster-sa23042510.html
Unfortunately this leads to 404. Do you plan to have this in stock later on?
@@bios-loudsociety Hi, Yes, this will be back in stock hopefully beginning of 2024.
I regularily keep coming back to check this item's availability, still no luck. :( Do you have any updates on when can it be expected?@@VPARTSGARAGE
I'm going to install glass lenses from a 2004 XC70 on my 2007 XC70 to avoid having to adapt the harness and newer lights have market bulbs and look better. Which glue do you use? Is there a link for the glue?
Snyggt jobbat vet ej om jag har tålamod till detta 😅
You should open a headlight using electric cooker in the kitchen (of course, professionals have special workshop headlight ovens for this). ... Dremel cutting is the first time what I see to open a headlight.... ;-)
Hello,
Unfortunately that doesnt work on this glue.
@@VPARTSGARAGE I have done one side of my car so I know it is a PITA to do it, yet have you ever tried applying those headlight glue separator after you heated up the headlight?
And I believe you may try selling additional kits which retrofit the projectors as you would never ever open the light again in your lifetime... :)
Bro serious question as i dont find anywhere for a fix... I have volvo s80 v8 2007 with BLISS system, sometimes it stops working because there is something on the lens, which isnt true. The lenses became foggy from inside, especially right side. Is there a way to make it clear again or replace the glass?
@Vparts Is the reflector available seperately?
P2 xenon and abl xenon headlights are much easier to open, done lots of them, even install new rechromed reflectors of the projector, light output is a new…. Sold a lot of refurbished headlight in my country…
Did 1 pair of P3 abl xenon headlight, also installed new rechromed reflectors of the projector: light output as new….
Projector lens is very easy to clean, and necessary when you open the headlight….
Nice one! I'll have to get a pair. So no cleaning of the projector lens at all while it is open?
Thank you!
I would be really careful with the projector lens if you want to try and clean it.
Waiting these to in stock! There is Aliexpress alternatives too😢
Kan ni göra en video på hur man installerar extra backljus på XC70 12-16?!
Det ska vi kika på!
First, congratulations! amazing job and video! Do you offer this service if i send my headlights? thanks
Thanks so much!
We are not a workshop in the sense that we take in customer cars. Now that you've seen the video, you can buy the headlight lenses and do it yourself :)
We hope that they will be back in stock at the beginning of 2024.
We need these for C70 (mk2)
Coming hopefully before the end of the year. :)
cannot find this white/crystal covers to side markers in headlights...on vparts site...
Once the lens are back in stock this spring 2024 will folks in North America be able to order/ship? Really interested in new lens and the clear/white corner reflectors!
Hello,
Unfortunatly we do not ship to NA. The fastest way for you to get parts is if someone you know in the countries we ship to can order and then forward them to you. Sorry for the inconvenience.
Thats fine - I will find someone to relay the parts for me I am sure. Hope to see the lens in stock soon! Could you also advise on what glue/sealant you recommend?@@VPARTSGARAGE
I did this on my 2005 v70 and man oh man this job fucking sucks.
Especially much since you have to remove the whole bumper to get the headlights off the car.
But using the heatgun and big pliers to force the remaining lens off was a hell of a workout, arm was properly sore afterwards.
Yes it sure is some work to do it, but how about the results? Are you happy with them? :)
@@VPARTSGARAGE Yes, i bought the lens from you guys actually (hälsningar från finland!)
They turned out great in the end. i didnt want to do the job initially but when i saw the prices of new xenon headlights i quickly changed my mind.
Где вы взяли стекла для фар ? Или это китай?
It's one of our own products, currently out of stock but should be back beginning of 2024.
How did you get hat whole assembly off the car? Is there a video of that?
It's really easy, you have two pins at the top that you just remove to get it out. Should be in your instruction book how to do it. :)
Its in the car manual? I don't have to take off the bumper?
@@wizard-tv2478What model and year is your Volvo?
Where can i buy the new plastic headlight cover?
They will be back in stock this spring. :)
How long did it actually take you to remove one of the lamp covers?
I think it took about 1,5 hour to complete one side with glue and everything.
I have done this job several times, so maybe it takes 2-3 hours the first side for the first time.
what type of silicon did you use?
I would use CLEAR silicone like the type they use in bathroom applications as its water proof and clear like your headlight lenses.
jag kan inte hitta dena prudukten på er hemsida
Försäljningen blev högre än förväntat så dom tog slut snabbt. Dom tillverkas efter beställning så tyvärr har vi lång leveranstid på dessa just nu.
Could you tell me the part's number or code 6:49?
Hello,
Yes it's these:
vparts.se/se/vita-positionsljusglas-for-stralkastare-till-volvo-s80-v70-xc70-21111623.html
@@VPARTSGARAGEThanks a lot
Oh.... ill just buy new aftermarkets.
Sorry, I just want to better understand the beginning. Are you saying the lens has to be cut open because there are three screws that hold the lens to the outer housing internally?
Lens has to be cut open beacause the glue holding the lens cant be heated to loosen it.
So you cut the lens to be able to reach and remove the old glue. :)
But you have to be a bit careful around those screws and cut on the right side of them for it to not brake :)