CORROSION. How to protect your 4x4. Overland Workshop with Roothy
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2024
- Roothy, AKA John Rooth explains procedures to protect a 4x4 against corrosion. The key ingredient is lanolin.
Received from Scott Elms, owner of Rainbow Beach Under-body Car Wash: We do not use recycled water to wash vehicles. Roothy is welcome to see inside our operation at any time. (Roothy does not specify which car wash he is referring to in his statement.)
SUPPORT ON PATREON:
/ andrew_stpierre_white .
WEBSITE: 4xoverland.com/
INSTAGRAM: / 4xoverland_com
PODCASTS: bit.ly/4XOPODCASTS
ANDREW’S 4X4 BOOK: bit.ly/Four_Whe...
ANDREW’S AWARD-WINNING MEMOIR: bit.ly/Torn_Tro...
ANDREW’S FILMMAKING VIDEO COURSES: beafilmmaker.com
FACEBOOK: / 4xoverland
TWITTER: / 4xoverland
4xOverland is one of the world's largest global adventure motoring channels. It is hosted by well known explorer and filmmaker, Andrew St Pierre White.
![[UNCUT] เก็บ "สจ.โต้ง" เอี่ยวมาเฟีย รู้ตัวคนบงการ ก่อนสั่งลั่นไก I คนดังนั่งเคลียร์ I 13 ธ.ค.67](http://i.ytimg.com/vi/o-J_p62D40w/mqdefault.jpg)
100% FRESH WATER CARWASH. Rainbow Beach Under-body Car Wash DOES NOT use recycled water to wash vehicles. At the end of your video, Roothy suggests NOT to use Underbody Car Washes such as the one at Rainbow Beach. While this is true of some less reputable car washes, this is absolutely not true of our carwash. In fact, because of the circulation of this type of falsehood, we offer a Fresh Water Guarantee (10 times your money back). I have contacted Roothy and offered for him to come and see inside our operation at any time without notice to set the record straight.
Thanks for the chance to clarify this Andrew.
Scott Elms (Owner Rainbow Beach Car Wash)
It has changed then. Before it did use recycled water. It caused me a lot of problems.
Thanks itchy balls 🤣🤣🤣
I wish it actually washed off the Sand! for $30 the underbodywash is a waste of money at Rainbow.
2 out of my 3 favourite 4wheelering youtubers. All Australia! Just missing Ronny dahl
Thomas Sleigh Ronny’s a legend. Andrew... meh, he has his moments.
@@jonathanneethling They are such different people that might be way I like each of them and can't really compare too much. I'm from the UK, just surprised that they all seem to be from Australia.
@Thomas Sleigh with the exception of Andrew. He’s South African. Don’t get me wrong. He’s a pro. He’s probably forgotten more than I could ever learn about 4x4ing and over-landing. I just find his commentary a little repetitive sometimes for example the dual battery one. He’s got a very different style to others. Ronny Dahl on the other hand. He somehow brings you into the story. You feel he’s talking directly to you. And you feel you’re on the trip with him. Andrew... he’s got a reporter style. ✌🏻👍🏻
Lanolin is the best. When i worked in Darwin for the army at Robertson Barracks as a mechanical fitter, all the components that i rebuilt i had to coat with....you guessed it....Lanolin. Every single Australian army vehicle is coated with Lanolin underneath. Makes them last a lot longer in the bush. Great video Andrew! And good to see Roothy on your channel! Cheers boys!
Roothy and Andrew a couple of legends!!
wow...never expected to see you two catch up....so happy to see you two working together....2 best 4x4 experts in the world....Great show....Thanks
Humbleness that’s why they are masters!!!! Thanks for all the experience you share guys!!! 💪💪💪 greetings from Costa Rica!!! 🇨🇷
Great to see Roothy sharing his expertise / experience with you Andrew. Lanolin is awesome and chainsaw bar oil can also be brushed on, under the vehicle. Quite tacky which is good. Recently saw this posted by a guy on the East coast of the USA where salt is used on snow covered roads. Just gotta make sure that surface is dry before applying lanolin or any other coating, otherwise you'll seal - in the moisture.
Lanolin has been catching on here in the USA quite a bit the last few years. Many years for those in the “know”. I have Fluid Filmed my Toyota FJ every spring and fall (bought new in 2011) and 8 years later (8 New England winters, always outside) looked almost new. Started the routine now with my 2018 4Runner.
I love that hand pump applicator, I’m going to have to try one of those as opposed to the cans or air hose compressor sprayer. Great video 👍🏻
For all the folks in the USA. Fluid Film is the big lanolin based product in the US. You can buy it at Lowes or Home Depot. Only need 3 cans or so. Blast your rig every 6 months or so. It'll cost $30 and you'll be golden. You won't regret it.
Second this. I use Fluidfilm as well. Its proven to be the best.
For the hollow areas in the frame and doors we use this: Mike Sanders Anti-corrosion-grease has been tested by several independant German car magazines. It is the best rust prevention grease on the market. Should be applied from a pro with special tools to get it everywhere. Tests also on TH-cam.
First time i've heard of this product.
Is this suitable for the salty winter roads we get here in canada. Most products used here is a kind of heavy wax
@@mabernexpeditions9409 Should be ok. I use it in Utah without issue.
Qc cyclist They offer their product in different viscosities as well. It’s perfectly explained on their website.
That was quite a joy to watch, I think I could sit my butt by a campfire with a couple of beers and listen to you two chat all night.
Jason
This guy is great! A wealth of knowledge and I could listen to him all night. Never knew about using lanolin for this. Great video!
Really enjoyed this casual and relaxed format. I didn't know about lanolin, either!
Mark Rose same here, I’m going to buy some in the morning and give it ago
@@JFWGarage Hey after a year, how did you do with the lanolin?
This is by far the most important and best video you have ever done. Being in the Alps now, salted roads in winter are a nightmare - and you just solved a big quest I had been on for years. Waxoil didn't really cut it but this sheepish stuff seems to cut it. Thanks!
Love the video. I would love to see more of these collaboration videos with Roothy. The corrosion on alloy wheels, (nicknamed "white worm" in Aus), is a huge problem.
Easy done when you got hoist in your garage))) Thank you, Captain Rooth! Rooth and Andrew should try to make one episode together.
A fellow I used to know worked in an underground mine as a truck driver. He used to spray the outside of his truck with diesel & wipe it down with a rag after. His was the only one of 6 trucks which had no rust on the outside of the body so, his trucks were not replaced as frequently as those of the other drivers.
He told me the truck always looked dusty but never rusted.
So good to see you two in this old 3yr old vid - Lanolin though is still current rust free maintainable
Andrew if you read this May 22 maybe time to catch up with Roothy again!!
My two favourite you tubers! I’m so happy to see this!
I kept wishing the twit whistling in the background would be quiet - until it dawned on me it was a butcherbird ! Love it !
Thanks Andrew, very informative interview with Roothy.
Thanks for sharing your knowledge, I am just building my first rig for full time overlanding in Canada & USA, I have contacted Lanotec to ask them where i can purchase their products, thanks and now I have a new you tube channel to watch with Roothy. Thanks again.
Wishing I had a lift about now, thanks for sharing the great tips guys
Thats funny I was getting ready to watch your video next! Cheers!
@@twistingterrain7748 Same here. :-D
As a driveline corrosion preventative on mine sites vehicles, the utilization of chemically fortified lanoline, blended within penetrating oils with dense suspension properties, has been standard implementation for over 20 years, and constantly monitored to conforming standards. Very few corrosion issues when reapplied every 12 months. Applied using pressure system to ensure deep penetration within internal crevices, and Australian produced product. 👍👍🇦🇺
Can normal people buy it?
@@2Calam Available but...... Product is made by Lanotec but is a mine site specific product which has gone thru extensive testing programmes before final approval. Downside is cost, restricted availability and bulk purchase only (1000 litre IBCs). 👍👍🇭🇲
Thanks for this very good video. I strongly agree re lanolin which I apply with a pump up weed sprayer, and also Saltex (or equivalent) , with the same type of pressure pump, ALL OVER including radiator, a/c condenser, etc. before and after beach work, and inox through engine bay and mechanicals before and after. This combination has served me well for many years
Nice to see you 2 together!
Top stuff, just went and bought 5L to throw on the old disco 1. Nothing like the floor pan rusting through at the seams!
Also using it on the interior plastics of my dmax and better than anything else I have used. Magic stuff
Please more of this style. I can't say I learned anything new in this video but it has shown me I wasn't an idiot for listening to my old boss and doing this.
More people in this country should know the name John Rooth. Cheers Andrew, always love your videos.
Thanks for that. Very helpful, but I was also interested in the HQ ute in the background!
Thank you for putting together this video! It is the most informational one I have seen in a while!
Good to see you catching up with john! Would be good to see you and john do a few trips!
Been an advocate of using Lanotec for some years thanks to an early video from Roofy
What a legend, Roothy has a new fan
Great video, would be great to have a 2 part video one on each channel both you guys sitting back talking the talk about all things in general bouncing off each other around a fire. What a wealth of knowledge and experiences to share. Andrew can enjoy his coke and roothy can enjoy the beers.
Such good information. Common sense if you really think about it but what if you never think about it. Videos like these are so valuable in today's world. Wonderful hard learned knowledge digested and presented in a concise manner. Thank you so much for "writing it down".
Well you learn something every day. I guess I should have known that there is a potential problem where alloy wheels meet the hub because I am well aware of the problem with different metals when boating. Guess I just never thought about it before...
Good video. Roothy is such a great fella.
I've been using Lanotec for a few months now and it's fantastic stuff. It's been especially good for interior detailing. My 30yo Landcruiser's interior was badly faded and the cleaning products I was using weren't working, but a wipe over with lanolin brought out the original colours and it's stayed that way. The only downside to lanolin is the residue attracts dirt, so you have to be mindful of that.
I clicked on this video from my subscription list thinking it was one of Roothy's. I was pretty confused when it started, but it was a pleasant surprise.
Really, Really great & enjoyable Andrew, Thank You.
Safe Travels Mate, Steve.
which truck is in your profile / avatar picture? also +1 to you.
Nice to see you again guys! :)
This is awesome information, thank you for sharing it. Greetings from Canada.
There's a new product called xcp xpro rust inhibitor. I sprayed the underside of my rx with it and it kept it rust free through the last winter where here in the uk our loads are plastered in salt. Its a highly corrosive environment that eats older cars. This stuff works. There's also acf50 which I liberally spray over my bmw adventure bike. Its still pristine 4 years later as I treat it every two months. This will inhibit rust and even treat lightky rusted areas to restore them. Worth every penny. I have lannolin but xcp pro is better...it stays effective for months.
Lannolin is good for your skin too! As shooter I use it to lube my brass cartridge cases before resizing them. Its great stuff but the xcp is the dogs danglies bits for doing the underside of your truck.
Love Roothy and the 40 series!
Simple fact is that the manufacturers should galvanise the chassis to start with, Land Rover did it with the Perentie chassis and bulkhead and while it's a sacrificial coating that will eventually break down it does take a long time. Nothing to stop axle casings, swivels, hubs and all the small brackets receiving the same treatment, what would it add to the cost of a new vehicle to have a 25yr chassis warranty?
Another entertaining informative video, I’d like to see the three of you ( must include Ronnie) do a trip and compare all your over landing equipment, compare personal preferences etc, you seem to spark off each other really well, I’ve enjoyed this one, ( as ever) thank you. Bill Westley
I’ve been holding off putting chemical gunk on my Landie hoping one day I’d get advice like this. THANK YOU!!
$2 can of canola cooking oil from your favourite supermarket works well too for rustproofing the underside. You smell like a chip shop for a couple of days but it works as well as anything else I've tried (lanolin, fish oil). Didn't plan on it, but realised just before a Moreton trip I'd forgotten to do anything so used what was available 👍
You can't spay canola oil though can you
Loving the collabs! I will be using the lanotec UP for sure.
Getting my Fj cruiser chassis and underbody recoated and then in with the lanotec!
Electronic rust protection doesn’t work in 4x4’s!
My father worked for ford and talking to the engineers about it they said if we thought that would work why wouldn’t we put it in cars factory!!
Great information💯I’m a true believer in preventative maintenance, Thanks Mate 👍
2 of the my favorite 4wd Aussies
very useful video, thanks
Liked before I even watched. Gotta love two greats together
Brilliant! Just brilliant. I've been searching for something to help maintain my 04' Tacoma that still have a nice frame. THANK YOU!
I find the best thing is put the garden. Soaker hose under it after mud or the beach
Great Tip for Sealing the Underbelly of your 4x4 - Thanks Guys
I ended up tackling rust too late in my vehicles life so I had to go a different route and use POR-15 with some major repairs to fix rot, the method shown here is much simpler and I wish I had known about it years ago. There is one problem though, I live in a very rural area and the unibody frame rails on my Jeep XJ were filled with mouse nesting material and debris which stayed wet and caused the rust to accelerate rapidly and cause rot. This method would not solve that problem, as the small rodents and debris would still have easy access to the holes in the frame rails and body. I ended up shooting every hollow crevice in the body and under body frame rails with expandable foam to fully seal those areas off from moisture and debris. For the climate I live in and the conditions I face it was the best option I feel. In warmer areas like the Southwest US and Australia the method in the video looks like it works well.
I don’t do 4x4 I actually exclusively drive ve commodores, in saying that all of this applies thanks legend
I thought he was Anthony Hopkins brother! Roothy's method reminded me my grandfather used to use cosmoline the same way. Only drag is the dry SW,USA is so dusty your car always is khaki color no mater the paint beneath.
Tim Kirkpatrick he is
Two legends
Corrosion is always a chemical process, and anywhere you have dissimilar metals, you have a much greater potential for corrosion. This means not only where the hubs meet the rims, but also where you have electrical connections change from copper to steel.
I would say out of experience the best way to fight of rust with a car or 4x4 is rubberizing when they drive the car on a ramp and spray the whole undercarriage with bed liner basically... thats almost the best and easy way and not only that... still even if you have it *rubberized* after a day at the beach or any offroading in that case spary the whole underside with a hose
Yep two legends
Andrew when are you getting Roothy to South Africa, I'm sure he would enjoy a Trans Botswana, Namibia and Namaqualand trip. The nice thing about adventure trips in Southern Africa is the fact you don't have to drive as far to see so much, compared to here in Australia. Get Roothy to Africa :-)
Years of UK struggle with Finigan's gloopy Waxoyl, useless self-clogging aerosol cans, self- destructing pump applicators and futile efforts to make it flow despite diluting with white spirits and heating the cans in hot water. It certainly didn't help on BL products in the 80's. Revelation however in finding another product used for preserving jet engine components "OCS 100" or similar that remained liquid and seemed to creep into gaps like the rather heavily eulogised Lanotec here (which I'd never heard of until today, but looks interesting) , but I`ve lost the details, as it worked so well in 1999 on the underside of a rust-free 1978 Range Rover I still have and a G Wagen kept for 12 years with no hint of rust.
thanks for tips
Love the idea of this but can’t find Lanolin in the UK unless I want something for hard foot skin😂
Great collaboration though!
Thank you, I enjoyed that! 👍👍
Maybe a case for neats foot oil, but neats are now also getting rare!
Try Lanoguard!
How do I get that lamb oil spray in the States? I'm in the New England area of the US and rust has ruined 2 of my 4x4's over the years, 1 Cherokee and now my Tacoma is starting to go from ground moisture and all the road salt used in the winter months here. I've used Fluid film in the past, but It can wash off easy and then there's the smell... Oh the smell... If I could get that lamb oil stuff in a 1 gallon tin to put in my pressurized sprayer, it would be heaven!
Fluid Film is lanolin based, so you're already doing what you should. I've come to appreciate the smell! If I can still smell it, I know it's protecting my old Land Rover from the ridiculous salt on Michigan roads.
I had the same question as well! Can you purchase this in the United States?
@@kenwgoins I had been using Fluid Film, which has lanolin in it, but I can't take the smell. Everywhere I go it smells. I hope we can find an answer.
we used POR-15 to stop rust and corrosion when I lived at the beach in florida. lots of mudbuggy, drift and off road guys use it on their frames. no idea if they have an australian distributor though.
Acf50 I use on my bikes in Scotland and never have rust even after daily drive in rain and salt ( half year council spray roads here with salt)
It'd be cool to see you show the Aussies around Africa at some point, it's a completely different *kind* of overlanding that they're used to and I'm sure they'd enjoy it. Maybe you guys could make your own convoy or something? It'd be a fun series I suspect. :)
Or.. All of you warm weather folks could do an epic trip way up north in the cold and see how that changes your perspectives. :P
18:42 "Does drive a Nissan, but despite that he's not a bad guy" hehehehe
Good stuff , keep the lanolin off brakes , especially disc ones . I used to do my Landy with Lanolin then drive up a dusty clay road , it made a great protective coating l
Does it make the sand/dust stick to it
Cosmoline is the best. There is a spray can one called 'Amsoil Heavy Duty Metal Protector'.
Great information Andrew, thank you.
I wonder if we have a product in the UK similar to this to help us out...especially us around Snowdonia...
Not that I can find. ACF 50 of course, but that's expensive.
Yes we do. Its called Prolan. A kiwi firm with a UK seller. Prolan enduro heavy duty its called. An AMAZING PRODUCT!!
@@bigjimnycub9582 really good to know! I'll take a look, I'd like to treat my cruiser before winter again.
@@tomburnet treated my car last week. Its a joy to work with. You need about 2 litres to do everything, including chassis cavities and all chassis rails, bolts etc.
@@bigjimnycub9582 is it sprayed or brushed on?
i use home made wax oil , candle wax ,petroleum oil and white spirit apply with brush
Soo, I assume, the ali would corrode due to something similar to galling. I don't know the word for it. But, you've got aluminium bolted to iron and the chassis is negative earthed?
Can I mix the Lanoil 50/50 with the diesel to spray it easily?
Thank you for this important informations.
Great product but I can't find anywhere in the UK to buy a gallon of this product.
I'm in UK and have been looking. Just found this and might give it a try www.lanoguard.co.uk/ good luck
Does Roothy mean wax as oppposed to polish in regards to 'filling in' paint defects.
Lanotec is the best Stuff Ever made, smells Great too, don’t tell the missus
Very Interesting😎thanks for sharing it
Thanks 2 you old boys i know how to do it!
Hey guys is it ok to spray gear box and transfer case or will it be smoking ?
Some wise words their gentleman
I swear I could smell the lanolin when he was spraying
I'd go mad working in this workshop with this whistling guy...
It's a bird.
Oh, sorry, my fault. I'm actually not familiar with australian wildlife here in Germany. Beside that, very good video! We have plenty of salt during the winter here on the roads and corrosion is quite an issue. For long term conservation TimeMAX is very common here. Most dealerships which are importing the Land Cruisers from the UAE prepare their vehiclese with that before delivering to their customers. I think for our purposes the Lanolin won't stick long enough to every part of the chassis.
On the 6th April a guy [ Uncle Fjester] uploads a video from MOAB showing Two Land Rovers one a new range rover sport and the other the short wheel base New Model Defender with various close up photos and videos showing the vehicle with an independent rear suspension and with airbags - so that confirms your previous comments from another video of yours that this will not bode well with individuals trying to modify their NEW Land Rover Defender vehicles for overland use
What a team
sorry, I am french and would like to know wthat is this brand of lanoline because it seems to be hard to find here...
thank's a lot
Would love to get your opinion on the 1hz engine.
then you'll have to watch my videos. I've owed six of them.
@@4xoverland I wish I had time to watch them all mate
Any alternative oils you can use for undercoating your rig for east EU? Here there is only pharmacy grade lanoline and it's really expensive..
So was he saying you can use lanolin (the exact product in the video) on all paint and around rubbers instead of wax to prevent rust even further??
How do you feel about using Marine Grease for water sensitive parts?
So what do I do over in Finland where lanolin is only sold in 20ml tubes for applying to nipples when breastfeeding? I've used linseed oil before, I think it has some of the same behaviors as far as penetrating, but not so sure about actual protection.
Where do i get one of those hose attachments tubes from ????
With the car polish bit, isn’t polish designed to strip a small layer of clear coat off to reveal a new fresh layer? Wouldn’t wax be a better alternative as its effectively like adding a temporary layer of protection?
Some say polish but they mean wax. You'll find the oldies will say polish more often.
Craig Ice ahh ok, cheers.