This slurry is a blend of cement, water, some Class C ash, and an admixture that keeps the solids in suspension and prevents hydration from beginning until it is mixed. It is a very revolutionary way of soil reclamation, stabilizing, and treatment.
@00justSomeAccount00 not cheaper. It's often used in conjunction with soil tests; ie.. moisture water content or permeability. Soil stabilization is the reason for this. Your road is only as good as your sub base and base material. And, your sub base is only as good as the sub grade.
Amazed to see how easy one can build roads when you are in a warm and dry climate. Where I live motorways are constructed with a three meter thick drainage layer, to ensure the road isn't affected when the ground freezes in winter.
@@Kni0002 It is indeed, as a general rule of thumb the cost of constructing a standard four-lane motorway to these specifications is about EUR 25000/meter -- USD 9000/foot. But what can you do, in the past we have seen roads built to lower standards seriously deteriorated after the first winter. On smaller roads with lower speed limits the standards aren't quite as high, as you can tolerate a bit more uneven surface, but even there the drainage layer is between one and two meters.
Building it right the first time is cheaper. Having to rebuild the road every couple years is expensive and creates traffic flow problems. This video was shot in Kansas, and even though we dont get much rain in kansas, we deal with alot of freezing and thawing, so they really should have built foot or two thick drainage layer underneath. I always hate seeing asphalt laid directly instead of on concrete or a proper drainage bed.
Ok yesterday we went on a river trip in L.A. i told husband how amazed i am at mountains roads. How men and machinery is just amazing. Then I said 😂this looks like such a hard job for even men and machinery 50 or more yrs ago to make. I was maybe this is all an illusion and were all an illusion or maybe the aliens built this... Miles and miles of mountain roads just amaze me. He laughed! So here I am being amazed. Men and machines!! Are the greatest! I think too much while on road as passenger. Freeways, highways, bridges, tunnels and so much in world connecting is imazing.
That's quite interesting to see how other groups do road construction. I'm a finishing grader operator myself and we have never used a slurry in the base. The layout of your road heavily depends on your soil structure underneath. Where i am from within 30 years all of your gravel will be gone. The soil mixes up into the gravels and it turns straight to mud again. Core sampling proves it.
@@davidanalyst671 We use a base gravel, which locally we call 32 Base. It is a mixture of crushed rock and fines, as well as a binder, which is usually clay. One the gravel is down we tack oil the entire surface to be paved, it protects the surface from rain, and helps the asphalt bind to the gravel. In order to pave over the gravel we compact it for consecutive hours, usually 2 passes with a double steel roller. Once vibrating, and once static. Then we wet the gravel and hit it with a wobbly(multiple tire packer) for hours, adding water. We do this for every lift of gravel we put on as well. Last few projects I've done were 300mm of 32 base. It gets hard, so hard that a fully loaded semi doesn't even deflect it. You can do a literal burnout on the surface and it wont tear into the surface.
@@LLImprovement my dawg. you answered me without BSing me and calling me a communist!!! First person today. You should do a vid on this so I can see it. the only reason I asked was because this particular video looked like they dumped asphalt on dirt.
@@davidanalyst671 th-cam.com/video/hjROssPcwX4/w-d-xo.html Here's a playlist of a project I did years ago. Doesn't show everything as I was actively working on site. But it gives you a good idea of how we do it. This intersection was one of the busiest in our entire city so it was a rush job. But still to this day the road hasn't moved an inch. Usually the paths where the heavy trucks stop and drive are ruts. But 6 and a half years later its still good. That's what happens when we put as much slag and geotextile material down as we did. That was the only project we did in my time that was done properly and correctly. The rest have been skimped on.
sometimes renting is better, if you own it and you break something its all out of pocket. renting you can get a machine swapped out in a day or less and youll be running without the extra costs. they both have their place
This road construction procedure is incredibly informative! It's fascinating to see the meticulous process behind creating such vital infrastructure. You might find it beneficial to explore the Buildovate CRM for assistance with managing construction projects similar to these!
É por essas e outras mais ... q meu sonho é morar na América do Norte com minha família ... sou motorista de carreta e operador de trator ... aqui no Brasil ... sem chance de um trabalho assim ...
I'm starting a job with a very high paying construction job soon with the possibility of moving up to second in command thanks to a buddy of mine, I'm doing research because I want to be ahead of everyone else I'm competing with.
6:29 those two should have seats that are placed in front of the sprayer at the same level, to allow them to see what's happening. Sitting up all day is not pleasant for anyone and two chairs, rerouted controls and the frame work costs little. Take care of your workers and they're always going to work better.
Next year the County Highway Department will come in and chip and seal it and spray oil all over it to "preserve" it. It'll never look like this again.
whenever i see road crews it seems like they'll have their cones, tape and equipment all set up for weeks/months sitting idle until one day out of the blue they complete an entire stretch of highway in like two hours
I believe a majority of the work is planning, utility work, and surveying. Soil treatment and structure might take a while too when actual machines role out.
I know Andale in Spanish means hurry up but the reason we have our name is that the family comes from the city of Andale Kansas. Quality is our number one concern always. Build it right and build it tough.
@@andaleconstruction5510 my respects to yuor family and work is very professionally done, I'm my self a heavy machinery operator in Chicago area, god bless
What kind of material is in the slurry? Lime + water? I want to get into road building and but don't have a clue where to begin, Also do you guys use base rock(recycled concrete type base) as an underlayment?
I saw a machine (German?) demonstrated online that shaves off the old asphalt, processes it and lays it down, resulting in cost and time (vehicles can use it sooner) savings.
![แข่งแลกของ 1 วัน!! ของใครแพงสุดชนะ!! [Ver.2024]](http://i.ytimg.com/vi/joRT59ilPHg/mqdefault.jpg)
Always progress! I ran a chip seal crew ages ago. Up North. Weather and Plow trucks reak havok on new roads. Cool video!
Must be a trip to live on a dirt road your whole life, then come home one day and have a perfect paved road.
@@simonsilva5313de ytg v cvv
the road construction cones were only up for 3 years to do this
Cavite
trrrgtrtrthþhththgegthhhhhþhhthhrrggrhgģgghhghgģhğhhgģgģģģģggğggģggggggggģgģgğgghhgģgģgggggģģgğgģģggģggggggģggģggģgggggggģg
Something tells me this isn’t a one day process
Where’s the sequel where immediately after completion the city digs up the center the entire length to put a new sewer line in? 😂😂🤣
Slurry is a mix of flyash (burnt coal ash) and water. When mixed with dirt, after it dries, it makes the dirt harder and more water resistant.
Thanks Hunter, I was wondering what slurry was. Here in the Chicago are we never see slurry used.
This slurry is a blend of cement, water, some Class C ash, and an admixture that keeps the solids in suspension and prevents hydration from beginning until it is mixed. It is a very revolutionary way of soil reclamation, stabilizing, and treatment.
@@munsickmatt Thanks Matt. I saw someone doing this (wasn't able to record) and was wondering what they were doing.
Its a great way to put all the slurry accumulated at the coal power generating plants to some use.
@00justSomeAccount00 not cheaper. It's often used in conjunction with soil tests; ie.. moisture water content or permeability. Soil stabilization is the reason for this. Your road is only as good as your sub base and base material. And, your sub base is only as good as the sub grade.
Amazed to see how easy one can build roads when you are in a warm and dry climate. Where I live motorways are constructed with a three meter thick drainage layer, to ensure the road isn't affected when the ground freezes in winter.
Seems expensive...
@@Kni0002 It is indeed, as a general rule of thumb the cost of constructing a standard four-lane motorway to these specifications is about EUR 25000/meter -- USD 9000/foot. But what can you do, in the past we have seen roads built to lower standards seriously deteriorated after the first winter. On smaller roads with lower speed limits the standards aren't quite as high, as you can tolerate a bit more uneven surface, but even there the drainage layer is between one and two meters.
If it means the roads will last though the harsh winters then I guess its worth it, better then replacing the road every few years.
Building it right the first time is cheaper. Having to rebuild the road every couple years is expensive and creates traffic flow problems. This video was shot in Kansas, and even though we dont get much rain in kansas, we deal with alot of freezing and thawing, so they really should have built foot or two thick drainage layer underneath. I always hate seeing asphalt laid directly instead of on concrete or a proper drainage bed.
@@isaachousley325 why drainage under a water tight road surface ?
Amazing road construction!
Beautiful!. Love the music!
the music was terrible. it was the same melody repeated over and over and over!!!
Beautiful Work!!!!!!!!!!!!!
Anyone here not a professional and just curious on how roads were made?
I am never new so much went into making a road
Fldot has a different process 12in stabilizer 11base rock 3.25 asphalt
yes.
Me I am a 10 years old girl
I'm watching this vid cuz my country Indonesia doesn't make good roads. So i wanna see how America make roads.
Amazing build roads, I like this
Ok yesterday we went on a river trip in L.A. i told husband how amazed i am at mountains roads. How men and machinery is just amazing. Then I said 😂this looks like such a hard job for even men and machinery 50 or more yrs ago to make. I was maybe this is all an illusion and were all an illusion or maybe the aliens built this... Miles and miles of mountain roads just amaze me. He laughed! So here I am being amazed. Men and machines!! Are the greatest! I think too much while on road as passenger. Freeways, highways, bridges, tunnels and so much in world connecting is imazing.
Karem f it amazing how much work often goes into creating our modern infrastructure :)
Djk31💍❤💏💚💍
Yea sometimes just thinking about how many men it took and how many years it took to build modern infrastructure is mind blowing
むく and most of it in the last century (road construction)
LOVE this video. So nice to see videos like this. Don’t even need an inspector on the job If you have a video like this haha
hey, that's cool, thanks for the video
Amazing Vídeo!
Wow thanks for showing, I am learning a lot from this video
Wow good technology missions and good working
I have working in Andale construction almost 4 years, it’s good company they take care their employees
Nice video!
th-cam.com/video/ASkwbKWQb78/w-d-xo.html
thank you so mach I really useful of this show
Great job!
Excelente labor...
good job, greetings from Indonesia Chanel 🙏
That's quite interesting to see how other groups do road construction. I'm a finishing grader operator myself and we have never used a slurry in the base. The layout of your road heavily depends on your soil structure underneath. Where i am from within 30 years all of your gravel will be gone. The soil mixes up into the gravels and it turns straight to mud again. Core sampling proves it.
I'm curious, do they usually put asphalt on top of dirt? That seems a little prone to potholes
@@davidanalyst671 We use a base gravel, which locally we call 32 Base. It is a mixture of crushed rock and fines, as well as a binder, which is usually clay. One the gravel is down we tack oil the entire surface to be paved, it protects the surface from rain, and helps the asphalt bind to the gravel.
In order to pave over the gravel we compact it for consecutive hours, usually 2 passes with a double steel roller. Once vibrating, and once static. Then we wet the gravel and hit it with a wobbly(multiple tire packer) for hours, adding water. We do this for every lift of gravel we put on as well. Last few projects I've done were 300mm of 32 base. It gets hard, so hard that a fully loaded semi doesn't even deflect it. You can do a literal burnout on the surface and it wont tear into the surface.
@@LLImprovement my dawg. you answered me without BSing me and calling me a communist!!! First person today. You should do a vid on this so I can see it. the only reason I asked was because this particular video looked like they dumped asphalt on dirt.
@@davidanalyst671 th-cam.com/video/hjROssPcwX4/w-d-xo.html
Here's a playlist of a project I did years ago. Doesn't show everything as I was actively working on site. But it gives you a good idea of how we do it. This intersection was one of the busiest in our entire city so it was a rush job. But still to this day the road hasn't moved an inch. Usually the paths where the heavy trucks stop and drive are ruts. But 6 and a half years later its still good. That's what happens when we put as much slag and geotextile material down as we did. That was the only project we did in my time that was done properly and correctly. The rest have been skimped on.
Yea sure is! Here they put down a foot of base gravel then the asphalt....
Wow Amazing & Lovely
I find it amazing, that people still drive on dirt roads!!!
I like it the best video on youtube
Great 👍 job and good job 👏
Love your work from Bangladesh
Great job you guys .
Man I wish my company would have nice equipment like that. Every job we go to one or two machines break down making us rent new ones.
Yes man
Anthony jezek
Rent vs. own.. it's the same in the railway industry... they rent you the old crappy stuff. Own FTW
sometimes renting is better, if you own it and you break something its all out of pocket. renting you can get a machine swapped out in a day or less and youll be running without the extra costs. they both have their place
Same here
Wow, wonderful, God-blessed white Man.
Nice vídeo !!!
Amazed to watch video thrice...as our indian road is not capable for bicycling how can we drive Lamborghini in 20inch potholes
Looks 👍 good !
Damn Look at these graphics!!! WOW
This road construction procedure is incredibly informative! It's fascinating to see the meticulous process behind creating such vital infrastructure. You might find it beneficial to explore the Buildovate CRM for assistance with managing construction projects similar to these!
That’s amazing 😲😲😲
É por essas e outras mais ... q meu sonho é morar na América do Norte com minha família ... sou motorista de carreta e operador de trator ... aqui no Brasil ... sem chance de um trabalho assim ...
Great fantastic work
very nice very quick making road but unusual here in philippines
Muy buen trabajo
Excelente trabalho parabéns pelo vídeo
apik tenan gaweane..gut.👍
GREAT WORK ✌️👌🙏
profissional!
🍎🍏🍉🍓🥖🍟🍭🍬🍡🍻🍺🍌
Very nice work, please come to Costa Rica a fix all the road here :D
Lolz. I just watched long way up with ewan mcgregor
Andale Andale Arriba Arriba!!!!!! (like Speedy Gonzalez said!😉)
បងនី
beep beep!
@@user-ok3rr4xq4d হঅঅসাাতগসপঅা যঅিিএারুপিিািাটসঅাাাপঅাাালডমাাগআাসওসতপগোকাএাাাকাাাাুাাাাাাা াাাঅমাহজাাোক্
াাজাাা।াঅাঅাাাাাাঅঅাাাাাাাাাাাাাাা
Beautiful 😊
Good work I am Grader operator 20 Years experience
Inspirational Bgm💪
I like it works
i am Garder operatar.
Newfound respect for road engineers
nice video, only that never ending tune....
Ok
seriously, how about a little BTO since these guys clearly know how to TCB
Hite level mast hai Bai road ka
That would make for a really nice drag strip
lolz. I saw how straight it was
Nice vedio maker and road maker ... 😝
really impressive.. hope I would have owned such company in India
th-cam.com/video/XDMT7XoIcME/w-d-xo.html
Top videos friend 😊😊
Better then gravel for sure
I'm starting a job with a very high paying construction job soon with the possibility of moving up to second in command thanks to a buddy of mine, I'm doing research because I want to be ahead of everyone else I'm competing with.
yawn...
Good വർക്ക് 👍👍👍
Be safe out there 👷🏼👷👷🏽
6:29 those two should have seats that are placed in front of the sprayer at the same level, to allow them to see what's happening. Sitting up all day is not pleasant for anyone and two chairs, rerouted controls and the frame work costs little. Take care of your workers and they're always going to work better.
E uma pena que no brasil nao é assim também
Ausgezeichnet 👍👍👍👍👍
The procedure is different from in my country, this is more advanced, very good.
Zevin Fadila what is your country?
Next year the County Highway Department will come in and chip and seal it and spray oil all over it to "preserve" it. It'll never look like this again.
Good job.bro
Lovely..
Very nice company Andale construction 🚧
Yes, me. Lol. I'm a PSW, and commute to work, passing road construction daily.
Incrível
SO DRAMATIC
Great job
Better technology for construction equipment for better quality...
Perfect
laser perfect
whenever i see road crews it seems like they'll have their cones, tape and equipment all set up for weeks/months sitting idle until one day out of the blue they complete an entire stretch of highway in like two hours
KingSlimjeezy I swear
@@kravis_6131 by the sun and the moon and the stars
I'll be there
I believe a majority of the work is planning, utility work, and surveying. Soil treatment and structure might take a while too when actual machines role out.
KingSlimjeezy quickly learning this business is like this. Waiting waiting waiting - oh shit work - ah all done. Next job.
th-cam.com/video/XDMT7XoIcME/w-d-xo.html
ورحبيِِِ..في اليمن
damn xcellnt
I would love to drive on that right after completion
Great vid! Man i love graders. Whos hiring?
Great Vedio
Cool proccessing
I like the name( hurry up construction ) but the work is very professionally done tnku
I know Andale in Spanish means hurry up but the reason we have our name is that the family comes from the city of Andale Kansas. Quality is our number one concern always. Build it right and build it tough.
@@andaleconstruction5510 my respects to yuor family and work is very professionally done, I'm my self a heavy machinery operator in Chicago area, god bless
That’s a lot of work just for a country farm road lol. Wish they did that where I’m from.
nice
Am i the only one watching the slurry being injected is satisfying
Nice
I've never seen fly ash layed like that. I've always seen it pumped raw by rigs then water added by water truck then mixed.
th-cam.com/video/Po9sTmFsI6E/w-d-xo.html
Hope you like this
Amazing
Nice but you should see what there doing 4 lanes to Puerto Vallarta through the jungle
Gooooooooddddddddd
Whats the reason for having the slurry being mixed in with all the graded material & what is HA5????? Cool video. take care.
nice videos im also youtuber
Great job! What is the brand of Superslurry Machine?
What kind of material is in the slurry? Lime + water? I want to get into road building and but don't have a clue where to begin, Also do you guys use base rock(recycled concrete type base) as an underlayment?
Excellent
4rm Tanzania
Wonderful
I saw a machine (German?) demonstrated online that shaves off the old asphalt, processes it and lays it down, resulting in cost and time (vehicles can use it sooner) savings.
T'airn'KA that machine or one similar does 99% of the roads where I live
kewl and where is that? ;-)
Asphalt milling machines are all over.
T'airn'KA bro it's called "asphalt reclamation" we been doing it here on the nys Thruway for probably 20 years
T'airn'KA not new by ANY MEANS! technology has definitely gotten a lot better but still it's been around for a long time