I did the same thing. Very many primers made their way into the track. Cut and install some covers to fit in where you don’t need the track available. A cool 3d print project. Otherwise very lekka!
For so long I kept looking for your channel back form remembering your video after the riots in S.A. Glad to have found you again when looking up information about the nation!
Got the idea from Gavin as well and love it. Apparently it has been around in the wood working community for a long time. You can use a router and make you a notch in the track to drop in the t bolts
Love your content 💪🏽 Someday please do a video on how you skin some of the animals, preserve the meat while in the bush, tan the hides etc. Sort of the background of all the stuff we don't get to see.
@7:30 You can purchase 1/4-turn drop-in t-nuts. McMaster Carr calls them hammer nuts. Also set up your NAS in a raid config so if one drive fails, your data will be mirrored on another.
Can't wait to see you build a gun room. Hopefully you'll do a series on it. It's something I am considering and I'm sure there are others on here interested. Would be great to get some ideas and knowledge on how to create a secure space where I can enjoy my precious babies.
I never got any tattoos and don't plan to in the future.:))) I hope your upgraded work benches are going to make your life easier. Keep making your useful content.
I went with 4 tracks rather than 2. I built a series of mounting plates for different items that i regularly mount to my bench. Case trimmers, vices, presses, all of it on aluminum plates. Also, rather than using the edge guide, it goes a lot faster with a couple simple guides, and a flush trim bit.
I have an mdt 110 elite precision that I want to upgrade the action in. Any custom actions that fit the savage 110 screw layout for the MDT premier gen 1? Nothing online.
Hi Piet, I have a question on the mounting system. I have a Dillon XL650 and a Ponsness Warren shotgun re loader, they have a very different foot print, would I be able to mount the 12Ga to it as well or is it only for Dillon type footprint?
When are we getting the FX DRS pro video because was at Patriot outdoor and asked them about your airgun and they told me that thay were bussy with tuning and zeroing it at there indoor range. Think i was there Wensday to buy an V- bag
Can I ask why you decided to get your tattoos removed? I’m sure they meant something to you originally. A few years ago I decided to get myself a chassis for my birthday and discovered your channel then. Your recommendation definitely helped me decide. Went with the MDT ESS for my Tikka 708 and have never regretted it!! Only regret not getting a folding stock. Also own multiple APW Warbirds and love them!! Much love from NZ!
Need to hit up Linus from Linus Tech Tips to come build you a server. Not only would it give you backup and redundancy for your data, but would make an awesome video as well 👌
Pieter is dit? as dit u se naam is kan jy dalk na namibia toe kom en springbokke op my plaas kom skiet en dalk vlakvarke as ons kry en as jy wil kom ek sal kruit en punte betaal.
Hallo ek kyk baie van jou videos en so aan ek will by jou hoor watse skaal sal jy se moet ek vir my kry ek begin nou self laai ek het n lyman gen 3 maar hy gee my moelikhuid ek skiet met n 300 wsm my gr is 65.5 maar as ek dit in drik op my skaal dan gooi hy heeltyd 65.6 of 65.4 so watse skaal sal jy vir my aanraai
Support The Channel And Learn Long Range Here - bit.ly/49bwZZB
I think we all want to be set up as well as Gavin.
Good luck with the tat removal.
Huge pat on the back to Bro for the handyman brother rescue!
Looking great Piet! Amazing how liberating this track system is eh?
I did the same thing. Very many primers made their way into the track. Cut and install some covers to fit in where you don’t need the track available. A cool 3d print project.
Otherwise very lekka!
Highly recommend a Synology NAS... Basically your own in-house server, and you can set it up it up to be redundant across multiple hard drives.
For so long I kept looking for your channel back form remembering your video after the riots in S.A. Glad to have found you again when looking up information about the nation!
Could you post the measurements for the location of the tracks (distance from edge of the bench to the first track and the distance between them)?
Got the idea from Gavin as well and love it. Apparently it has been around in the wood working community for a long time. You can use a router and make you a notch in the track to drop in the t bolts
Love your content 💪🏽 Someday please do a video on how you skin some of the animals, preserve the meat while in the bush, tan the hides etc. Sort of the background of all the stuff we don't get to see.
Hi Piet, could you maybe tell me the brand of the pegboards?
www.impactproshop.net/product/tacwall-panels/
@7:30 You can purchase 1/4-turn drop-in t-nuts. McMaster Carr calls them hammer nuts. Also set up your NAS in a raid config so if one drive fails, your data will be mirrored on another.
Congrats on 250k Subs. Keep it up! Been here since 5k subs.
Legend!!! Thank you so much for tagging along!
Can't wait to see you build a gun room. Hopefully you'll do a series on it. It's something I am considering and I'm sure there are others on here interested. Would be great to get some ideas and knowledge on how to create a secure space where I can enjoy my precious babies.
I never got any tattoos and don't plan to in the future.:))) I hope your upgraded work benches are going to make your life easier. Keep making your useful content.
I built my reloading bench track system following Gavins bench too! Your final results look great!
Where did you get the tracking from? Your brother did a nice job
I went with 4 tracks rather than 2. I built a series of mounting plates for different items that i regularly mount to my bench. Case trimmers, vices, presses, all of it on aluminum plates. Also, rather than using the edge guide, it goes a lot faster with a couple simple guides, and a flush trim bit.
I did the Gavin Rail system a year ago. But I only did it on half the bench. That way I still have flat surfaces and scrap won't fall into the rails
I have a rubber mat that I cut to the dimensions of my bench. I also vacuum the tracks regularly.
I'm proud of you for getting the tats removed😊👍
@6:18 sHushi🤣
Would love to hear what led to you deciding to remove them tat..'s. Kudo's
Hey Piet congrats on 250K 🎉
I have an mdt 110 elite precision that I want to upgrade the action in. Any custom actions that fit the savage 110 screw layout for the MDT premier gen 1? Nothing online.
Why the tats removed?
Hi Piet, I have a question on the mounting system. I have a Dillon XL650 and a Ponsness Warren shotgun re loader, they have a very different foot print, would I be able to mount the 12Ga to it as well or is it only for Dillon type footprint?
Lekker Piet. Congratulations Home Owner 👍🏻👏🏻
When are we getting the FX DRS pro video because was at Patriot outdoor and asked them about your airgun and they told me that thay were bussy with tuning and zeroing it at there indoor range. Think i was there Wensday to buy an V- bag
Hopefully soon, they had some issues with it
Can I ask why you decided to get your tattoos removed? I’m sure they meant something to you originally. A few years ago I decided to get myself a chassis for my birthday and discovered your channel then. Your recommendation definitely helped me decide. Went with the MDT ESS for my Tikka 708 and have never regretted it!! Only regret not getting a folding stock. Also own multiple APW Warbirds and love them!! Much love from NZ!
Need to hit up Linus from Linus Tech Tips to come build you a server. Not only would it give you backup and redundancy for your data, but would make an awesome video as well 👌
I always use ultimate reloader's TH-cam channel when I'm looking for new stuff 😅
I definitely get the tattoo regret, that being said I'm in the process of getting another one lol
Nice I did the same thing, will never go back. So convenient
Give us some details on the new NAS! Nerds want to know!
58.2TB usable space RAID 5. I believed thats the spec.
Can you do a video on EDC guns(pistol)
Why the tat removal?
What is the other language you are speaking in some of your videos. I know there a many languages spoken in SA and was just curious.
Afrikaans 😃
NAS RAID 5 setup.
Yes, 60TB later!
Set the damn camera on@tripod FFS. The high speed swirling has destroyed what might have been a great video.
Nice
Pieter is dit? as dit u se naam is kan jy dalk na namibia toe kom en springbokke op my plaas kom skiet en dalk vlakvarke as ons kry en as jy wil kom
ek sal kruit en punte betaal.
So you are removing cross tattoos and then you say that we should pray for the retrieval of your lost data?..which way do you want it? 😂
Done tattoos removal from hands.. you don't fall asleep 😅
2 min mark ...thats what she said
Hebrews certainly got that right.
Too bad on the tattoos. I remember the earlier videos you used to talk about that stuff. Not so much anymore.
Hallo ek kyk baie van jou videos en so aan ek will by jou hoor watse skaal sal jy se moet ek vir my kry ek begin nou self laai ek het n lyman gen 3 maar hy gee my moelikhuid ek skiet met n 300 wsm my gr is 65.5 maar as ek dit in drik op my skaal dan gooi hy heeltyd 65.6 of 65.4 so watse skaal sal jy vir my aanraai
Ask. your subscribers is anyone has saved some of your lost videos, I know I've saved some just not the ones you lost.