5:30' use salt will make chlore gas, and it's dangerous if high concentration. You can use lemon juice or vinegar. You should mention safety when using acid sulfuric also.
I've built a few HHO generators, and I see a few issues with his design. If he's intending on producing just hydrogen, then he needs to minimize the amount of negative rods because hydrogen is produced on the positive side and oxygen is produced on the negative side also I noticed that he's not using a spark arrestor or one-way valve. When the Flaming gas backs up into that accumulator tank it's going to explode like a grenade!
You can’t change the amount of hydrogen and oxygen produced by using more rods. They are stoichiometrically related, two liters of hydrogen must produce one liter of oxygen. Giving less surface area to oxygen production will only reduce the reaction rate overall since oxygen will have a bottleneck.
Yo también e realizado experimentos con generadores de hidrógeno y por lo general siempre se produce el doble de oxígeno que de hidrógeno , aparte que te equivocas el diseño si cuenta con un sistema anti retroceso, o también llamado burbujeador , se nota la poca experiencia que tienes en el tema , y yo más que defectos en ese diseño lo que veo es una tremenda inspiración para un muy potente cañón , solo es cuestión de hacer unas pequeñas modificaciones para que soporte una presión mayor de ese modo se obtiene un cañón que nada tiene que envidiarle a un cañón que use pólvora esmas creo que incluso podria superarlo pues la potencia explosiva del hidrógeno es enorme
Hello, great video and good idea to use the inert carbon core of dry cells, but you have left the welds exposed, remember to isolate all the metals inside the HHO reactor otherwise all the metal anodes will disappear and that is why the electrolyte will get dirty and the use of inert carbon cores will lose all sense, but the assembly is nice.
Congratulations, it was very enjoyable. I was also planning to make this device. The idea of this work came to my mind from the alcohol gun. I wanted to make something stronger than the alcohol gun. It works very well for the hydrolysis of baking soda and water solution. Good luck my friend 💯🎉
How long will the generator work until them battery sticks get bad? Also when the battery things be completely dead (no electricity) Is there a way to charge them back into being conductive again? This is the first time I seen your videos. Im so glade youtube recommend me to you. My mind was blown from the creation of this unit. I subscribed right away! Amazing work and cant wait to see more.
Great video! The concept of turning water into hydrogen is fascinating. What are the advantages of this hydrogen generator compared to traditional methods? Are there any safety risks to consider when building and using it? I’d love to learn more about the possible applications of the hydrogen produced. Thanks for sharing!"
I do first time see a face channel whrere these types of vidoes are showing real face - there are a lot of channels where making fake such devices and creator are hiding itself! So this Skill Make channel are legit and awesome!!
I had to give up on all these DIY science experiments. I wasn't cut out for stuff like this. I remember my first attempt at something that looked similar to that but when I applied just the right amount of voltage it ripped the fabric of reality creating a wormhole that led to a weird world of people who lived there whole lives in reverse like literally everything functioned in reverse and for someone like me who never was very good at walking in reverse I got a lot of mean looks and weird sounds. I can only imagine it was something derogatory about my mother. They were very 4th grader-ish in maturity if you know what I mean. So after all that failure I wasn't fully ready to give up since my parents always told me to never give up if you fail the first time so I gave it another try and well this one didn't end up in another galaxy but on the FBI watch list. See ever since ole Einstein and Oppenheimer came up with the ole split the atom doohickey they assumed that plutonium was the best and most powerful thing to use but I guess somehow when I was making changes to my DIY gadget one of my cats shed claws got in it and once again I added the perfect amount of voltage and the reaction from a newly discovered element found only in the claws of cats was split in such a precise and obtuse angle that I know had I not plugged the plug when I did it would have completely vaporized the vast majority of the world. I was visited by "officials" if you know what I mean. Guess I popped up on their "radar" from the amount of fine tuned high grade particles being emited by my DIY science project. Didn't even know they could do that but yes yes they can and they get really mean and threatening so I was persuaded to disassemble it and never tell anyone about the secret element found only in the claws of cats. I know none of you will tell so it's cool. So yeah I gave up on DIY science experiments and stuff. Now I'm in the porn industry and finally found my true calling in life. It's been straight up ever since. If you know what I mean... "snicker in the back ground"... The lesson to learn is never work hard to only end up in reverse but don't give up until you're the bomb then don't let anyone take it away from you because if you never give up you'll hit the honey hole and the erection is history.. I mean the rest is history.. stupid autocorrect ...
A cell like that isn't going to last all that long though as the materials used simply can't withstand the process of breaking the bonds of the water molecules without the water breaking them down in return. The electrodes are all going to breakdown and even the copper wire in contact with the liquid will breakdown into the solution in a short about of time. It's the reason why so many use Stainless Steel, Nickle, or Platinum, or some other material that have a high anticorrosion factor.
With real graphite - not much (although it somewhat depends). However, those rods from batteries are not a graphite, but pressed carbon, and tend to disintegrate disappointingly fast into carbon powder during electrolysis.
That thing is for single show only and will not be durable. Metal parts are exposed to solution and will corrode like hell, especially on anode and especially using sulfuric acid. Carbon rods from batteries are not especially great as electrodes either, but metal parts will fail much faster than them.
Thats not a hydrogen only Browns gas - HHO. He also used KOH which will leat through the solder, metal contacts and copper in no time . Waste of time, use stainless steel and arrestor when burnings the gas.
The solder joints will corrode way that acidic environment also the test was pretty useless because you didn't test the joints in that corrosive liquid.
5:30' use salt will make chlore gas, and it's dangerous if high concentration. You can use lemon juice or vinegar. You should mention safety when using acid sulfuric also.
Or we can also use Baking Soda
No it doesn't.
Uou know in this video you can see his pure passion for his craft and the focus and effort its nice to see
There are always hydrogen producing videos on TH-cam. There are no hydrogen fuel cell creation videos. I wish you could make a video like this.
You need platinum for fuel cells, very expensive :c
@@aquafox8732 You may be right, platinum being expensive does not prevent video creation.
Actually they're all over TH-cam
Un diseño tremendamente inspirador gracias por compartir la idea ❤ saludos desde Colombia.
I've built a few HHO generators, and I see a few issues with his design. If he's intending on producing just hydrogen, then he needs to minimize the amount of negative rods because hydrogen is produced on the positive side and oxygen is produced on the negative side also I noticed that he's not using a spark arrestor or one-way valve. When the Flaming gas backs up into that accumulator tank it's going to explode like a grenade!
Isn't that what that vertical tube of water is for?
Umm.. hydrogen is produced on the negative electrode and oxygen on the positive not vice versa?
You can’t change the amount of hydrogen and oxygen produced by using more rods. They are stoichiometrically related, two liters of hydrogen must produce one liter of oxygen. Giving less surface area to oxygen production will only reduce the reaction rate overall since oxygen will have a bottleneck.
Yo también e realizado experimentos con generadores de hidrógeno y por lo general siempre se produce el doble de oxígeno que de hidrógeno , aparte que te equivocas el diseño si cuenta con un sistema anti retroceso, o también llamado burbujeador , se nota la poca experiencia que tienes en el tema , y yo más que defectos en ese diseño lo que veo es una tremenda inspiración para un muy potente cañón , solo es cuestión de hacer unas pequeñas modificaciones para que soporte una presión mayor de ese modo se obtiene un cañón que nada tiene que envidiarle a un cañón que use pólvora esmas creo que incluso podria superarlo pues la potencia explosiva del hidrógeno es enorme
Exactly!! Very dangerous because of back wave of detonation into a reservoir!
Hello, great video and good idea to use the inert carbon core of dry cells, but you have left the welds exposed, remember to isolate all the metals inside the HHO reactor otherwise all the metal anodes will disappear and that is why the electrolyte will get dirty and the use of inert carbon cores will lose all sense, but the assembly is nice.
Should probably mention which AA battery, because not all of them have that core. People gonna cut into alkaline batteries and make a mistake
And alkalines have mercury right?
it is a graphite/salt batteries
Congratulations, it was very enjoyable. I was also planning to make this device. The idea of this work came to my mind from the alcohol gun. I wanted to make something stronger than the alcohol gun. It works very well for the hydrolysis of baking soda and water solution. Good luck my friend 💯🎉
Beautiful work 👏🏻
How long will the generator work until them battery sticks get bad? Also when the battery things be completely dead (no electricity) Is there a way to charge them back into being conductive again?
This is the first time I seen your videos. Im so glade youtube recommend me to you. My mind was blown from the creation of this unit. I subscribed right away! Amazing work and cant wait to see more.
I don’t think the graphite rods would loose conductivity, but byproducts of the sulfuric acid could collect on the rod
5:20 The movie was great, well done man
Didn't anticipate that explosion was gonna be planned and have a use.
Great video! The concept of turning water into hydrogen is fascinating. What are the advantages of this hydrogen generator compared to traditional methods? Are there any safety risks to consider when building and using it? I’d love to learn more about the possible applications of the hydrogen produced. Thanks for sharing!"
I think better method is using acid and zinc or any other metal which dissolves in acids.
great design
thanks for sharing this, i have an idea to make something,
Why didn't the flame travel into the pipe as HOO is being created? Thanks
BOOM !!!!!!!!!!!! ......... thanks for the video dude
You should keep the graphite, it can be used for other projects.
Better than coil gun
Под конец стало интересно! Подписка и лайк
Keren banget karya anda
Nice video. Love it🤩
Smart. Neve thought about using acid
1st i thought.. Tony's Heart❤
That was awesome! 👍🏻🇺🇸
It was wonderful, man❤
❤بسیار عالی .
So nice . So good . Very interesting video
ممنون 🤗
Using a battery rod, how long can the water last before it changes color?
Nice job, excelent project HHO. Congratulation! 🤜🤛 SUBSCRIBED! 👍 Hug and sucess.
Amazing ❤️
مهندس چه عجب ویدئو گزاشتی
May I know how many amps the current reading is during this electrolysis process
Dont suppose those rings you used were 3d printed were they ?
If so anychance in getting an stl for them ?
Also making copper sulphate solution.
I do first time see a face channel whrere these types of vidoes are showing real face - there are a lot of channels where making fake such devices and creator are hiding itself! So this Skill Make channel are legit and awesome!!
For those reading comments, stainless steel works just fine dont go opening batteries 😭
This is not a Hydrogen generation but a mix of Hydrogen and Oxygen.
At first glance I thought those was Panasonic brand batteries and then I read it. 😂
Nice 🎉
How did the syringe needle stop the fire from blowing up the bubbler
یه همچین ویدئو با کیفیتی قطعا زمان و تلاش زیادی میطلبه ... واقعا دست مریزاد
نمی خواستم کامنت فارسی بزارم ، ولی نشد، ببخش😊😂
Так можна разоритися - витаскувати графітові стрижні з батарейок)) Їх же значно дешевше просто замовити. Чи вони всі повністю розряджені?
Bruh he built a tank Boom 💥
Maaaaahhhn....you have a tungsten balls to press those button...
this is parts maked by 3d printer?
Why use the coil electrodes, if anyway the metal wires is deeped in electrolyte?
I had to give up on all these DIY science experiments. I wasn't cut out for stuff like this. I remember my first attempt at something that looked similar to that but when I applied just the right amount of voltage it ripped the fabric of reality creating a wormhole that led to a weird world of people who lived there whole lives in reverse like literally everything functioned in reverse and for someone like me who never was very good at walking in reverse I got a lot of mean looks and weird sounds. I can only imagine it was something derogatory about my mother. They were very 4th grader-ish in maturity if you know what I mean. So after all that failure I wasn't fully ready to give up since my parents always told me to never give up if you fail the first time so I gave it another try and well this one didn't end up in another galaxy but on the FBI watch list. See ever since ole Einstein and Oppenheimer came up with the ole split the atom doohickey they assumed that plutonium was the best and most powerful thing to use but I guess somehow when I was making changes to my DIY gadget one of my cats shed claws got in it and once again I added the perfect amount of voltage and the reaction from a newly discovered element found only in the claws of cats was split in such a precise and obtuse angle that I know had I not plugged the plug when I did it would have completely vaporized the vast majority of the world. I was visited by "officials" if you know what I mean. Guess I popped up on their "radar" from the amount of fine tuned high grade particles being emited by my DIY science project. Didn't even know they could do that but yes yes they can and they get really mean and threatening so I was persuaded to disassemble it and never tell anyone about the secret element found only in the claws of cats. I know none of you will tell so it's cool. So yeah I gave up on DIY science experiments and stuff. Now I'm in the porn industry and finally found my true calling in life. It's been straight up ever since. If you know what I mean... "snicker in the back ground"...
The lesson to learn is never work hard to only end up in reverse but don't give up until you're the bomb then don't let anyone take it away from you because if you never give up you'll hit the honey hole and the erection is history.. I mean the rest is history.. stupid autocorrect ...
A cell like that isn't going to last all that long though as the materials used simply can't withstand the process of breaking the bonds of the water molecules without the water breaking them down in return. The electrodes are all going to breakdown and even the copper wire in contact with the liquid will breakdown into the solution in a short about of time. It's the reason why so many use Stainless Steel, Nickle, or Platinum, or some other material that have a high anticorrosion factor.
О, известнейшие батарейки пенонсинг, фуджисоник и панасканик...😂
TH-cam allows this but takes down brandons prim minister shotty.
Your category name please❤
Please make a video on making high powered air gun
Офигеть! 😮
what are the dimensions of the blue circle
Find a cone-shaped can so that the explosive gas will be more concentrated and more powerful?
Using butane or propane is cheaper. 90% isopropyl alcohol (disinfectant for first aid) and kerosene can work too.
❤️🔥
Here, this batteries are called "Panasonic"
Does sulphuric acid not react with the graphite rods??
With real graphite - not much (although it somewhat depends). However, those rods from batteries are not a graphite, but pressed carbon, and tend to disintegrate disappointingly fast into carbon powder during electrolysis.
That’s a bomb waiting to go off
Странно что в фалаут так и не сделали самодельную водородную пушку😅
А вы знали, оказывается продаются электроды для сварочного аппарата из графита☝️
Can I use it on my car to save fuel
should make one for a potato cannon, no one has done it
Go out into the field and shoot at a variety of things, you will be successful.
سلام استاد خسته نباشید بسیار عالی عالی بود
Amazing good
Thank you so much 😀
Доктор Дью! Ау)
He can built an incredible machine but can’t balance a watermelon😂😂😂
Я один ждал, когда у него Верхняя колба Бахнет в дребезги, это Опасно...
This great
plz do video with solar panel, hydrogen fuel cell, hydrogen container, hydrogen fuel cell, then light. (storing solar power in hydrogen battery.
Where r the plans ,i want to make one
Or: how to blow your hands away when the gas presure reduces, and the gas flow is slower than the burn speed.
That sir.. Is a timed grenade
I would think that making a dry cell unit would be easier than this.
wow
as a jobless Mallu I got an idea from E waste
Energi listrik yang di butuhkan berapa volt ampere
Watermelon, NOOOooo! 😢
He is using new battery’s… ?!
Can bedien with used?
❤ FRUMOS
When I see someone revitalizing nuts with pliers, I ask myself, does he not have the right key???
Just how to make a voltage step up circuit
There is something else in the video and something else on the thumbnail. This is misleading
Like a nuckler reaktor
hydroxygen generator not only hydrogen !
1:53 Clown Core
Hydrogen are known to be very explosive, your lucky you didn't over fill the combustion chamber
That thing is for single show only and will not be durable. Metal parts are exposed to solution and will corrode like hell, especially on anode and especially using sulfuric acid. Carbon rods from batteries are not especially great as electrodes either, but metal parts will fail much faster than them.
There is no way to replenish the water....
Thats not a hydrogen only Browns gas - HHO. He also used KOH which will leat through the solder, metal contacts and copper in no time . Waste of time, use stainless steel and arrestor when burnings the gas.
how much hight voltage. ????????
i want this
battery "Penonsing" O_o??? ok XD
Don’t think that’s a generator tho.. some form of projectile accelerator..
THERE IS NO WAY TO TELL ALL THE TROUBLE I'D GET INTO
WITH A COUPLE A MILLION $$$ & ABOUT 20 OR 30 PEOPLE
LIKE YOU !
А что если разлогать воду это грех??
misleading though cause this is an hho generator not an h generator
The solder joints will corrode way that acidic environment also the test was pretty useless because you didn't test the joints in that corrosive liquid.
Conectar con nikel en el interior