Hello again After drain the water, how long do you left rice husk to dry? How do you know the rice husk is ready to put it into the bag? My second: do the bag lid need a hole to let the air pass? Last question; what is the cotton balls used for? Thaks you
Another great Video 👍🏻 Thank you so much 🙏🏻 I wonder if for 1 plastic bag of solid grain is a must to use 1 petridish inoculated Mycelium to have a good mushroom spawn? What i mean, wouldn't it too expensive for the cost/expense? 1 petridish for 1 plastic solid grain..?
it can be incubated in normal tropical room temperature (25-28 degree celsius), in dark condition. Can you clarify what do you mean by filtre 0,2 micro?
@@user-fr7pv8qr6u yes, it's easier if the bag got a filter patch, but it's more expensive. you also can use a heat-resistant glass jar, make a hole on the cap, and then plug-in cotton wool... or use glass bottle, and cotton plug on the bottle's mouth.
Hello! I need those bottles cap! Where can I get them. My name is Balik from Togo 🇹🇬 (west Africa) and I'm just starting mushroom farming. I really need those cap. Can you you provide them for me if possible? It's so smart. How can I get in touch with you?
the mushroom basidiomycete (fruiting body) is developed from mycelia. The mycelia will form a primordia (pin head), can finally developed into a mushroom fruiting body. thank you.
Greetings dear friends I've made the entire procedure but I always get green mold. I used wheat grains instead of rice husk and glass jar, and the inoculation was made inside a laminar flow box. Can you help me to find the possible spots of contamination? bye
@@ropenedu Hi there🖐 1- I rinsed the grains in water, 2- I let it dry for 8 hours 3 -boiled the grains for 15 min, 4- Put the grains in glass jars 5 - I put the jars inside the pressure cooker for 50 min. 6- I let them cool one night. 7- I inoculated the grains with the petri dish culture inside the laminar flow box, then I put lids on with a hole and also put cotton inside de jar as a filter. 8 - finally i put the jars inside a big cartoon box, but 2 days later i have green mold around each piece of jelly with white mycelium that I put inside the jars Sir, do you have an email address in orden to send you some pictures? thank you very much for your attention🙏
@@ropenedu Thank you very much, been learning how to make my own mycelium culture to try out some packaging. Your videos alongside other videos I found on youtube have been a tremendous help.
yes. gypsum, calcium carbonate, calcium sulphate, etc. is used to increase the pH and act as anti-bulking. However, you can omit the use of these materials as well.
It's ok for the production of spawn. However, not recommended to use food crops as the substrate. In addition, rice will retain too much moisture, which makes them not suitable.
Dear Sarah, it's a polypropylene (PP) bags, which can withstand high temperature with a melting point of 171 °C. Alternatively, polyethylene (HDPE) also can be used with a melting point of 130 °C.
I usually use a metal tea spoon, wipe with 70% alcohol, then inoculate 2-3 spoons of the spawn. Otherwise, you also may use 1-5% based on the weight of the substrate.
@@ernestovillenajr9869 make sure the moisture content of the growing medium is good (not too wet or not too dry). Inculabe at 25-30 degrees celsius in dark condision.
I used an autoclave. Steam sterilization at 121 degree celsius for at least 15 minutes. but the whole process from heating, sterilization, and cooling will take approximately 2 hours. Alternatively, you can pasteurize at 80 degree celsius for at least 8 hours.
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
Great video, please I want to ask can this also be used for oyster mushroom spawn production?
yes, generally the method is similar, including for oyster mushroom
@@ropenedu Thanks for the response and clarity 😊
Which covers we have to use for spawn growing
Hello again
After drain the water, how long do you left rice husk to dry? How do you know the rice husk is ready to put it into the bag?
My second: do the bag lid need a hole to let the air pass?
Last question; what is the cotton balls used for?
Thaks you
15-20 minutes is sufficient. The rice husk is not wet, but moiste.
Thanks for sharing this knowledge.
you're welcome. thanks for your support.
Another great Video 👍🏻
Thank you so much 🙏🏻
I wonder if for 1 plastic bag of solid grain is a must to use 1 petridish inoculated Mycelium to have a good mushroom spawn?
What i mean, wouldn't it too expensive for the cost/expense? 1 petridish for 1 plastic solid grain..?
theoretically, more inoculum means faster colinization. reducing the inoculum to a quarter or less is possible.
thanks for this great video
My question is: can I replace autoclave for a pressure cooker ? If yes, how long do I let the rice husk cook for?
Yes. Can substitute autoclave with a pressure cooker. 30-40 minutes should be sufficient.
Please can I use fresh mushroom instead of cultured one?
thank you ,at which temperature it's incubated and why don't you a filtre 0,2micro?
it can be incubated in normal tropical room temperature (25-28 degree celsius), in dark condition. Can you clarify what do you mean by filtre 0,2 micro?
@@ropenedu it’s a filter that comes on mushroom growing bags 0.2 & 0.5 filters. For gas exchange
@@user-fr7pv8qr6u I see. It's not necessary. I use cotton as filter.
@@ropenedu I’m new to all this but almost EVERYONE buys bags with filter patches.
But u proved it’s not necessary thanks for sharing
@@user-fr7pv8qr6u yes, it's easier if the bag got a filter patch, but it's more expensive. you also can use a heat-resistant glass jar, make a hole on the cap, and then plug-in cotton wool... or use glass bottle, and cotton plug on the bottle's mouth.
Thanks for an informative video. Please would you let me know where could I buy pp plastic neck for mushroom bag. Thanks for your information.
try to find it online, or find it in a local agricultural input shop.
Hello! I need those bottles cap! Where can I get them. My name is Balik from Togo 🇹🇬 (west Africa) and I'm just starting mushroom farming. I really need those cap. Can you you provide them for me if possible? It's so smart. How can I get in touch with you?
Absolutely he got the best psychedelics products 📌
Absolutely 👍 order yours on from him on instagram right away
In this mushroom can produce a mycelium.. Or the last one inoculation is Mycelium ???? Please explain this clearly
the mushroom basidiomycete (fruiting body) is developed from mycelia. The mycelia will form a primordia (pin head), can finally developed into a mushroom fruiting body. thank you.
Can i actually skip the boiling/cooking part? I noticed if I don't cook it the micelium is not white enough
yes, you can skip, depending on what material or seeds you use.
Hai... Perkenalkan namaku Lusi dari Indonesia
IS THIS METHOD IS USE FULL FOR MILKY MUSHROOM CULTURE
thank you for your very informative video.
in terms of yield, wen u compare both grains and rice husk, which gives better yield for mushrooms?
theoretically, spawn grown with whole rice seed (grain + husk) will give stronger inoculum as compared to rice husk alone.
I love your channel.
Good
thanks for the support
Bagaimana proses pembuatan benih jamur kancing atau champignon ??
Great video! THANKS!
Mushroom Spawning is under which focus area: Post Harvest or Agriculture & Allied sector? Kindly throw some light please
Greetings dear friends
I've made the entire procedure but I always get green mold. I used wheat grains instead of rice husk and glass jar, and the inoculation was made inside a laminar flow box. Can you help me to find the possible spots of contamination?
bye
how did you sterilize the grains?
@@ropenedu
Hi there🖐
1- I rinsed the grains in water, 2- I let it dry for 8 hours 3 -boiled the grains for 15 min, 4- Put the grains in glass jars 5 - I put the jars inside the pressure cooker for 50 min. 6- I let them cool one night. 7- I inoculated the grains with the petri dish culture inside the laminar flow box, then I put lids on with a hole and also put cotton inside de jar as a filter. 8 - finally i put the jars inside a big cartoon box, but 2 days later i have green mold around each piece of jelly with white mycelium that I put inside the jars
Sir, do you have an email address in orden to send you some pictures?
thank you very much for your attention🙏
@@maomao484 the procedure should be good. email me at rakibmrm@ums.edu.my
Great videos, thanks for sharing !
thanks for the support.
This method it is applicable for volvariella volvacea spawn? Thanks.
yes. it's similar.
at what temperature did you incubate the spawn for?
temperature between 25-30 degree Celsius should be fine.
@@ropenedu Thank you very much, been learning how to make my own mycelium culture to try out some packaging. Your videos alongside other videos I found on youtube have been a tremendous help.
@@ForensicNA the compliment is much appreciated. Thanks for your support.
Are we want use gypsum for paddy husk to make spawn?
yes. gypsum, calcium carbonate, calcium sulphate, etc. is used to increase the pH and act as anti-bulking. However, you can omit the use of these materials as well.
How much we can use gypsum and calcium sulphate for paddy husk? Ex 1kg in dry
@@j.p.n.uddipajayalath5578 1% of the weight of paddy husk (dry basis)
@@j.p.n.uddipajayalath5578 if u use 1kg of dry paddy husk, then add 10 g of gypsum.
Why need to boil the paddy husk?
allow the paddy husk to absorb some water and soften them.
why we must boil the rice husk first? and what is the function of the cotton near the seal? thx
boil the risk husk to allow water to absorb and soften a bit.
the cotton is to allow air exchange
Gud day i would some advice if rice is suitable for mushroom substrate if yes can you advice me how. God bless
It's ok for the production of spawn. However, not recommended to use food crops as the substrate. In addition, rice will retain too much moisture, which makes them not suitable.
Hi. Can we add some flour in to the spawn mixture?
I think it's not necessary to add any flour.
Generally saying need grains for spawn. Husk is subtract. Is It good.
thanks for the advise
👋 hello, where can i get plastic neck and cap like that in sabah?
Brought from a seller in Kundasang. Unfortunately, I don't have the detail of the seller.
Love your videos
Thank you.
Bolehkah saya gantikan jagung
dengan padi,, apakah jagung segar atau biji jagung yang telah dikeringkan
boleh. jagung kering
Thanks for the great videos!!
Sir can I use rice bran commercially
I never try. I think it will work as well.
Do you have to place the spawn in a dark room?
yes. dark condition will enhance mycelial growth.
Dulu beliau bekerja sebagai PNS. Sekarang sudah pensiun dan bekerja sebagai pengusaha bata merah
Please can the incubator used for poultry be used
yes, but not practical 😂
Berapa perbandingan media tanam untuk serbuk , kapur, dan tepung jagung untuk 100 kg serbuk
kebiasaannya nisbah 100:10:1. 100 substrat, 10 dedak padi, dan 1 kapur
During the steralisation in the autoclave, I didn't expect that the plastic bag won't melt under the autoclave pressure😅
Dear Sarah, it's a polypropylene (PP) bags, which can withstand high temperature with a melting point of 171 °C. Alternatively, polyethylene (HDPE) also can be used with a melting point of 130 °C.
Who can you use the double rolls bag check this
Itu bibitnya dari media PDA ya??
Hello ma'am good morning 🌄 how to apply spawn
I usually use a metal tea spoon, wipe with 70% alcohol, then inoculate 2-3 spoons of the spawn. Otherwise, you also may use 1-5% based on the weight of the substrate.
I'm watching from purok3 Blanco balingasag misamis Oriental
Nak oder benih cendawan tu mcm mna ya tuan
setakat ni belum kami belum menjual. tuan boleh beli melalui shopee.
Is that also true for vulva mushroom?
yes. similar technique
how many hours to sterlized?
30-60 minutes in an autoclave (121 degree c), or 8 hours in an industrial steam sterilizer (70-80 degree c)
@@ropenedu your email id please
Wheat 90 minutes
Obrigado
Bem-vindo
Thanks
Clean
Bakit po nalulusaw fruiting bags ko nawawala mycelium nya e ang ganda naman nong nasa incubation?
sorry, I can't understand. I hope to answer your question.
@@ropenedu thank you,my fruiting bag's is slowly disappear the mycelium?but okey when at their incubation?
@@ernestovillenajr9869 make sure the moisture content of the growing medium is good (not too wet or not too dry). Inculabe at 25-30 degrees celsius in dark condision.
@@ropenedu OK tnx
Tq
Ferry good
For sterilisation the husk, what temperature and duration?
I used an autoclave. Steam sterilization at 121 degree celsius for at least 15 minutes. but the whole process from heating, sterilization, and cooling will take approximately 2 hours.
Alternatively, you can pasteurize at 80 degree celsius for at least 8 hours.
Thanak you.
Aku ingin kampusku bisa mengajari cara menanam jamur untuk seluruh desa di Indonesia
GBU
😍😍😍😍😘😘
My halo pang iba po yang ipa
sorry, could you please translate it in English?
What or the plastic pieces called ?
it's a PP plastic neck for mushroom bag.
@@ropenedu thanks good day to u
👍👍👍👍👍👍👍
top
Sekam padi di pabrik ayahku banyak sekali. Ayahku bekerja sebagai pengusaha bata merah.
Universitas Muhammadiyah Purwokerto
Aku sakit skizofrenia sejak 2016
I invite everyone to read coran
ূধানেরমারপেকেটকিভাবেপাব
Pabili po
Ang dami arti bat sa kin knakamay ko lamang bat dming mga spawn olol
thank you for your comment. unfortunately, I do not understand the language.
☝️☝️look up that handle, he's got shrooms, Dmt, lsd, mmda, psilocybin, chocolate bars, he's discreet and delivers swiftly🍄🍄💊💊🍫🍫