Thank You for your previous replies. I would like to know IF I could either get a copy of the 3D file you used to make the motor bracket OR can I get one from you. Also what is the gear ratio of the little motor unit you use.
I was actually just thinking about making an R/C sub and thought if the same thing. Everyone online has these crazy ideas... you seem to think the same as me. Have a sub that is weighed down that is just the tinest but positivly buoyant with the syringe closed, suck up water to submerge, squirt it out of the model to surface.
Would you be kind enough to tell me what kind of motor and gear box you are using. I am an electrical designer by occupation, and have a ton of 3d design and printing experiance, but this will be my first attept at anything this large of an operation. I only have dealt with steering and forward and reverse on cars, how do you have it limit the travel so you do not strip the gears.
I was wondering where you purchased all these components and where I may be able to get them, for example the motors the syringe and I’m assuming that the gears were hand made or 3D printed
@@tiver21Could you please provide a bit more of details about the components you used or orderes fom aliexpress (article number or somthing like that and/or dimensions) Thanks
Hello, Can you please tell me where in aliexpress you bought the parts that hold the gears and the motor. Any part number also please. Thanks, George T Thank you for posting this video here.
www.aliexpress.com/item/32663766369.html?spm=a2g0s.9042311.0.0.27424c4dmhsyU6www.aliexpress.com/item/32956400217.html?spm=a2g0s.9042311.0.0.27424c4dWERt32 The motor mount was printed on a 3D printer.
@@tiver21 Hello, Thank You for the part information. Is it possible to buy OR get the 3D file copy for the motor mount from you? Please let me know. George T
Very clever , but it takes in not enough water to be of use . The total weight of water that is sucked up into the syringe . Would the total weight of the model submarine on the surface , the reserve buoyancy . Which would mean your model would have to be very light . If the model is heavier then this it would never surface !
Use weights to adjust the neutral force. Use ballast. There's no problem with diving and rising. But the ballast capacity is small. Diving and rising...A short moment... It will require fine finger control over the radio.
Awesome! can you please share the motor mount design ?
Nice build
Can you tell what components you use
Thank You for your previous replies. I would like to know IF I could either get a copy of the 3D file you used to make the motor bracket OR can I get one from you. Also what is the gear ratio of the little motor unit you use.
what do you use to make this
I was actually just thinking about making an R/C sub and thought if the same thing. Everyone online has these crazy ideas... you seem to think the same as me. Have a sub that is weighed down that is just the tinest but positivly buoyant with the syringe closed, suck up water to submerge, squirt it out of the model to surface.
Would you be kind enough to tell me what kind of motor and gear box you are using. I am an electrical designer by occupation, and have a ton of 3d design and printing experiance, but this will be my first attept at anything this large of an operation. I only have dealt with steering and forward and reverse on cars, how do you have it limit the travel so you do not strip the gears.
I was wondering where you purchased all these components and where I may be able to get them, for example the motors the syringe and I’m assuming that the gears were hand made or 3D printed
I bought everything except syringes at a Chinese shopping mall called aliexpress.The syringe was purchased from a local pharmacy.
@@tiver21Could you please provide a bit more of details about the components you used or orderes fom aliexpress (article number or somthing like that and/or dimensions) Thanks
Good design, I am new maker, I would like to made a 1:350 Japanese I-400, do you mind share your 3D file to me for use? thanks so much!
where did you get the parts
and what the names are for them I am a complete rc noob in desperate need of help
also this is really cool nice job
How you make it turn back
reverse the polarity in the waring
ဘယ္မွာဝယ္ရမွလည္း
Hello, Can you please tell me where in aliexpress you bought the parts that hold the gears and the motor. Any part number also please. Thanks, George T Thank you for posting this video here.
www.aliexpress.com/item/32663766369.html?spm=a2g0s.9042311.0.0.27424c4dmhsyU6www.aliexpress.com/item/32956400217.html?spm=a2g0s.9042311.0.0.27424c4dWERt32
The motor mount was printed on a 3D printer.
@@tiver21 Hello, Thank You for the part information. Is it possible to buy OR get the 3D file copy for the motor mount from you? Please let me know. George T
Also forgot to ask you about the mini motor used, what gear ratio does it have? Thanks Again for your help. George T
How will you know if full or empty? I don's see endstops... Nice job:)
This is a test version. The piston ballast was created with the limit switch added. th-cam.com/video/9s_EiS0xeeA/w-d-xo.html
Very clever , but it takes in not enough water to be of use . The total weight of water that is sucked up into the syringe . Would the total weight of the model submarine on the surface , the reserve buoyancy . Which would mean your model would have to be very light . If the model is heavier then this it would never surface !
Use weights to adjust the neutral force.
Use ballast. There's no problem with diving and rising.
But the ballast capacity is small.
Diving and rising...A short moment...
It will require fine finger control over the radio.
윗글에 주문하나 들어왔습니다
project ban gaya to pani piya ja raha hai