F30 H&R SUPER SPORT SPRINGS INSTALL STEP BY STEP RWD 340i
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- We install H&R Super Sport Springs on Eric's aka Eric Americanboy F30 340i RWD. This is the first full step by step install on a RWD F30, we saw a few people do it on TH-cam but was not filmed all the way so it did not show the critical parts that you have to know for the front. It is NOT the same as XDrive, the back is the same however the front is not. Hope this helps anyone doing their own. Good luck and thank you for your support, I appreciate you all.
Front Springs Index
Spindle/Knuckle Bolt 0:59
Spindle Spreading 02:04
Sway Bar End Link 02:42
Tie Rod 04:17
Strut Tower 06:25
Spring Compression 07:00
Hat Removal 07:40
Strut and Spring Build 09:15
Re-installation 12:45
Rear Spring Index
Shield Removal 18:08
Knuckle and Strut Bolt Removal 18:43
Spring Removal 20:45
Spring Build and Install 21:02
Strut and Knuckle Bolt Install 22:20
Eric Americanboy Instagram / eric_americanboy
/ boo5t_
boo5t.com/
H&R Super Sport Springs, make sure you choose the option you want
x-ph.com/h-r-s...
Website Incoming with cool products
This is the best tutorial. No cuts no edits, just show literally every step. Great job guys!
Thanks man
first i want to thank you so much for this video ... i just finished putting the lowering springs on my 440i and this was the best video to help me through it... For FYI if you dont have the strut seperator you can use a 3/8 to a 1/4 drive save a couple bucks.... thank you again!!
Honestly I can't tell you how good of a quality this tutorial is. And such an amazing video. This definitely deserves way more views. Thank you for this. I will be installing my springs soon.
Thank you for the support!
Love how you instruct on how to do this. I actually did my first springs install using this video. Thank u
Thanks man! Glad it helped
Same here. I appreciate you man.
thank u, did that job in 2 hours instead of 4 ❤
Great tutorial. You make it look so easy. I'm not sure if anyone commented, but the inner bolt on the rear is installed backwards. Just an observation.
Lol yes I get that comment but talked to a bmw shop about that and they said it would make no difference because I was curious. Thanks for the observation and next time will be the right way lol
Just dropped by car with the h& r super sport. Happy ☺️ with the results. Thanks bro.👍🏻
How are you doing dude!!! Man funny story. i was doing this literally the same day this video came out and i saw your video. I favorite it so i had something to come back to in case my buddy and I got stuck. And we actually did get stuck on the tie rod part for the struts. Kies didn't explain that in his video about the rear wheel only wouldn't have enough space so I wasn't aware of that lol... well I got frustrated and forgot to check this video to continue and now that I have my answer I feel so stupid for not utilizing your information last Saturday. So now that its a few days later, i feel so dumb for not checking out your video when i should have xD..... Anyways now I can finally get to removing those nasty long springs! Thanks
Nice! Glad to hear the videos are helping. I love Kies videos and he does some great how to videos... mine are a bit more in depth just because know the struggle... however sometimes mine can be drugged out a bit lol. Thanks for the support!
Good video... gonna have a go at this tomo... cheers 👍🏼
Thanks and good luck you can do it!
Honestly best video step and detail so far👍🏼
Thank you!
Very helpful
great video your earned a subscriber thanks guys saved me dumb money at the bmw dealer
Thanks bro!
I like the video but dude you have to start using Jack Stands and a Torque Wrench.
And one of the bolts in the rear suspension, I think is the one that holds the strut, should go facing the other way.
Thanks, I am not a mechanic I like to help people out so I do what I can/know how to do. I do use stands when needed but this was a simple spring job nothing long so didn’t use them however I see your point.
nice !
Great video Bro.
Greatly appreciated!
Thanks for the very helpful video. I just subbed. I just got a 340i last week. At first I wanted to get coilovers but the car has the m adaptive suspension (has wires connected to the strut) and I really don't wanna mess with that. So I thought about just getting the H&R springs, but I'm still debating if I should go with the H&R sport or the H&R super sport (more aggressive lowering). The problem right now is that I have BMW 20 inch wheels and there's about a two-finger gap between the fender and the tire, so the H&R super sport might be a little too low.
Hey thanks! Ya for 20” wheels super sport is probably not a good idea, I would be surprised is sport works with 20” but maybe. Thanks for the sub!
Great job explaining the process. Not afraid to do it myself!!! 1 question though.... Do the springs have any clearance issues if you use spacers on the wheels?
Hey, good question but I have never used spacers so not 100% sure.. I can say I use wide M3 wheels with 255/35 front 275/35 rear with no clearance issues!
19:05 what is that bolt called with the torx head? i stripped mine and the two replacements i ordered didn’t fit the nut
I will try to look it up I have no idea
How do you know how to set the top hat in the right direction? I tried installing today and I got everything right up until I screwed the top hat back into the top and when to Install the sway bar back and the bracket wasn’t in the same spot as before
Not sure what you mean it should work
when you say the camber needed to get fixed on one wheel would an alignment fix that?
Yes usually if everything is normal
With suspension
I dint know how f chassis are but I did my e90 and I had so many issues with the sway bar end links I went through 3 sets of adjustable end links
Sounds like you reversed the end links I’ve seen it done before, make sure it’s the right side and right orientation. I nor my friends have had issues with the 5-6 cars I installed
Hey was he able to fix the camber on that wheel i did the same instal and my fromt right tire cambered in hard
Not sure if he did but go to alignment shop and they can fix it
great job bro !!
brother i get 335i f30 luxury pack i want put it little bit down ! how many mm you choice too put down 45 mm ?
Sorry but I did not measure but I think 2 inches
Love the channel and your car is super badass.... I just put coilovers on my 2015 335i xdrive and my fender is 25-3/4" from ground (1.50" Drop) .... another guy just posted his is 1.25" drop and his axle is shot... have you had any issues with any xdrive you have lowered?
Hello, I have not had any issues with mine or anyone that I know with them. Could be he did something wrong?
Fantastic tutorial!! Hopefully putting the H&R sport springs on my rwd 2016 340i. Hows the ride quality?
I’ve done quite a few of these and I can say ride feels good but a pothole you can feel in your heart 😅
@@BOO5Tchannel thanks for the feedback. Can you be contacted outside youtube?
@@jerednull8557 Instagram boo5t_tube
Great content. Did you get it aligned? If so hows the specs? Will it have negative camber?
Hey thanks, was not my car so not sure if he got it aligned
Hi I recently installed H&R lowering spring and after a week of waiting for the springs to settle my driver side front strut blow out and started to leak my car has adapted m suspension would I been fine if I buy the bilstein strut non damptronic ? For a 340i 18
Man I do not have the answer, I am a hobbyist not a mechanic sorry
Is there any difference of installation between the RWD & Xdrive models?
Yes
@@BOO5Tchannel found another video. Appreciate the response tho g
Should I do alignment after spring install?
Absolutely! Good question
do you have to get camber re adjusted after install or is that something with his car
His car had issues prior to install but definitely should get your alignment done when lowering
What can u use instead of a spindle spreader
Chisel or anything that tapers a bit to wedge in
Do you know the tightening torque on the 21mm nut that assembles the tie rod end to the steering knuckle? (The one you had to remove in order to drop the knuckle down).
28ft lbs is what I see on google double check though
It's 175NM / 129 ft lbs and you should use a new nut.
When I did my springs, I have the passenger side slightly lower compared to the driver side.. did you notice this too?
No but did you drive it a bit first before measuring? Takes some movement to unload the springs and struts a bit after lifting
@@BOO5Tchannel I have had them on for two weeks so far and still uneven. It’s like 1 inch one the driver side being higher compared to the passenger side. I did have the sport springs but I ended up buying the super sport I’ll be installing them soon and finding out how they are.
UPDATE!!
Okay so I installed the Super Sport Springs and they leveled out a lot better! I would advice going with Super Sport compared to Sport!
You probably didn't have the spring rotated correctly and it wasn't bottomed out
Great Video and tutorial 👍🏼Do you know if this process also applies to 2016 435i Gran Coupe? I’ve looked all over and can’t seem to find a clean video for my 435i
Yes it should be identical step by step as this
hey bro how do you know how low to go on the suspension strut to the knuckle clamp
Hey, it bottoms out, you have to bottom it out till it stops or risk big issues.
BOO5T what’s ur insta bro?
did this car have the adaptive suspension?
Hello, no it did not but a few videos from this the black car we did had adaptive. No difference in technique
You really put those on with factory shocks? Scary part is majority of the comments are people saying they're going to do the same 🤦♂
You obviously have no idea what your talking about. It’s made for factor shocks they are springs not coils. Scary part is you think your right…
@@BOO5Tchannel H&R Supersports? You really are dumb. Bet those shocks/struts blew the next day 🤡
Where did you buy the tool to spred shock?
Amazon bmw knuckle spreader I think it’s called
Where can i find tools you use ?
Amazon has everything you will need
Hey, noticed you didn't swap to a shorter bump stop or cut them. Are the springs riding on the stock bump stop and bottom out easily in the front?
I have done quite a few springs and never changed the bump stops, they do not bottom easy but it depends on what you are driving like as well. Hitting any pothole will bottom out with any stop even with smaller bump stops, I’ve actually never seen anyone change stops... that being said I’m sure there is a benefit for a few inches
I’m trying to put back stock springs now and I’m having some difficulty! Any tips???
Same way in reverse order I would say
@@BOO5Tchannel the springs are just so big not sure they will clear
@@alexmyhas should be able to fit them since they came off, are you compressing the spring?
@@BOO5Tchannel yes I am, the thing is I have adaptive suspension but they are blown (rebuilding car) I bought normal struts non adaptive and they are shorter at the top but the springs are same on both struts. So I’m just guessing I need to compress it more
@@alexmyhas might need the springs to match those struts I’m not sure if you can change that
Which impact driver are you using there?
It’s just a dewalt driver
@@BOO5Tchannel Yeah this much I'd already figured buddy, but DCF850... DCF787...DCF887...? 🙂
That driver is I gave to a friend when I got a new one but It was an XR brushless if that helps
@@BOO5Tchannel oh I see ok, no worries. I just that I nearly bought one the other day until I realised there were different models out there with different torque levels to them.
How much did it get lowered?
Hello, did not measure exactly but h&r posts height drop on site
Hey man great vid! do the super sport for 340i xdrive??
Hello, are you asking me to install yours or have I done one? Not sure please clarify
@@BOO5Tchannel i am asking if you know, if the super sports fit the 340i xdrive
Frandy Diaz yes both sport and super sport as long as you get the right ones for your spec
Get some Coilover instead of shitty springs, they will never ride good and the handling with some Kw or Bilstein will be well improved don't do, form over function. I'm telling you this out of experience. nice video !
I agree if you spend good money for higher end Bilstein, but for $200 HR is a performance spring company from Germany, far from shitty in my personal opinion. Low end Bilstein and low end KW is not an upgrade from stock Bilstein with HR springs you just get more adjustability
Dont need to touch tie rods.. put jack under rotors. Remove the strut bolts. Lower jack. Put spring compressors on the strut.. compress springs.. push down on rotors with your shoes and pull strut out of fender well... spread the strut clamp and pull entire strut out.. NO Need touch the tie rod.. dont mess with it. You are showing noobs how to ruin their cars...
Thanks for sharing your method.
The only noob here is Tom Wanachat. I've done both ways and removing the tie rod is the easiest/simplest ways way to drop the strut assembly. First, there is no room to fit the spring compressors in there. Second, there is no room to put the impact in place to compress them. Lastly, when you push down on the spindle ass'y you are putting so much stress on the bushings/joints you can damage them. Keep up the good work Forced Induction.
Asim Feratoski thank you!
I got adhd and you explained it perfectly where I just watched it one time 🫡
Lol I just realized this video wasn’t for the xdrive 😭😭😭
Very similar installs
We’ll see imma install the spring on my homies 340xi today lyk how it went