It's so awesome that we have good steel that you don't have to fold a thousand times to get usable steel. People will say this isn't a traditional blade, but with the quality metals we have today, it could stand against any traditional Era swords.
Japan is a country that can only produce low-quality iron, so they have no choice but to make weapons that are strong and flexible by folding them repeatedly. But if Japan had been a country that could produce high-quality iron, the KATANA would not have existed.
@user-zk6bb8ih7u that's true in the time of the samurai when they couldn't get better steel, so they had to fold it to flush out impurities. Now, with the technology we have, it's not as necessary as it used to be. We can get our kilns to a much higher temperature through the methods and technologies we have now. It's always cool to see how far we've come from the methods we had to use vs. the methods we now choose to use.
@@benjamintworek they only really folded the steel 9 + 16 times which didn’t take too long. It usually takes less than a couple hours to do that. Of course nowadays we have much better steels than the people back then, but I’d like to argue that the swords nowadays only focus on the blade without giving much attention to fittings ( is an issue because if the fittings are too loose then it could cause an accident while cutting ), and those companies that do offer proper fittings : Evolution blades, Zsey, etc, those swords cost around 3000$ - 7000$ which is enough money to be able to have a sword completely custom made to your specifics in Japan. 💀
Pretty sure I’ve watched enough TH-cam videos of actual Japanese masters making swords out of pure crap metal to say using tool steel, isn’t authentic.
This is a small type of Samurai sword. This is used to fight in the small and narrow areas. Other sword is called Katana and it’s a longer and bigger sword. It’s used to fight on the open areas. Each Samurai used to carry two swords back in the day.
Katana were mostly a symbol of status and would find the most use in self-defense. On the battlefield, most samurai would use a tachi, odachi, naginata, bows and later tanegashima-guns.
It lacks just about everything tbh. It looks like someone who hasn't made 10 knives yet trying something a bit too elaborate for their level, or rushing it to put it in a youtube short.
Damn I love your videos but next time you cover UK trap lore, hook us yanks up with some subtitles. Some of these accents so thick all I can understand is “OI BRUV INNIT U WOT M8”
@@mixx-team положение обязывает,сам ножи изготовляю и немножко розбираюсь,мечи японцы делали из молибденовой стали,руда у них с примесями молибдена,а обплетку делать учатся годами ,высшее искуство,здесь только правильно что кожу ската использовали и зональную закалку делали.
Ты оскорбил всю историю создания этого клинка, ты делал все небрежно, не стараясь сделать хоть чуть чуть лучше, грязная противная работа, никогда не повторяйте того что вы сделали в этом видел, вы позорите себя как мастера, с таким неуважительным отношением
Dude this is amazing
I can’t believe how talented some people are
I really appreciate that!! 🔥🔥
@@yellowgooseforgeVc faz ?
It's so awesome that we have good steel that you don't have to fold a thousand times to get usable steel. People will say this isn't a traditional blade, but with the quality metals we have today, it could stand against any traditional Era swords.
Japan is a country that can only produce low-quality iron, so they have no choice but to make weapons that are strong and flexible by folding them repeatedly. But if Japan had been a country that could produce high-quality iron, the KATANA would not have existed.
@user-zk6bb8ih7u that's true in the time of the samurai when they couldn't get better steel, so they had to fold it to flush out impurities. Now, with the technology we have, it's not as necessary as it used to be. We can get our kilns to a much higher temperature through the methods and technologies we have now. It's always cool to see how far we've come from the methods we had to use vs. the methods we now choose to use.
@@爺ちゃんが行方不明それは少し違うはず
適当なことは言うもんじゃ無い
@@raruhi3855いや、実際合ってる
古刀期はほぼ唐鉄しか使ってないし折り返し鍛錬の主な理由ってのは、たたら製鉄で出来た不均一な鋼を均一にすることだからね
なんなら折り返し鍛錬は還元法とか反射炉が出来るようになる以前では世界中でやってたし日本が考え出したものでは無い
@@benjamintworek they only really folded the steel 9 + 16 times which didn’t take too long. It usually takes less than a couple hours to do that.
Of course nowadays we have much better steels than the people back then, but I’d like to argue that the swords nowadays only focus on the blade without giving much attention to fittings ( is an issue because if the fittings are too loose then it could cause an accident while cutting ), and those companies that do offer proper fittings : Evolution blades, Zsey, etc, those swords cost around 3000$ - 7000$ which is enough money to be able to have a sword completely custom made to your specifics in Japan. 💀
コレが本当の日本刀の作り方だって誤解されそうだな……
Pretty sure I’ve watched enough TH-cam videos of actual Japanese masters making swords out of pure crap metal to say using tool steel, isn’t authentic.
What's the idea of the key wrapped in the handle ??, thank you .
@@johnproctor6438今の刀鍛冶はいないのでその動画は日本刀を作っている動画ではありません、今現在で日本刀を作れる人はいませんよ
@@wonderingwolf8428 Thank you, I have the same question!
そもそも現在残っている製法ですら、当時の人々に言わせれば"偽物"
当時造られた"業物"の製法は残っておらず、ロストテクノロジーとなっている
If theres a zombie apocalypse, I know one guy that is gonna survive
Yesssir!!! 😅🔥
- Becomes patient 0.....
@@npc1374Quagmire?💀
なんか｢日本古来の伝統てき製法と違う〜｣とか、｢こんなの認められない〜｣とかキレてる日本人いるけど、別にそこまで怒る必要無くない？形だけでも寄せられてるだけ凄いと思うけどな俺は。
寄せる努力はともかく凄いとは思わない。
そこらの鉄棒を整形して刃の形にしているだけなので耐久性は本物の日本刀に遠く及ばない。
@@kssy-h3l 別にこの刀で戦う訳でもないし造形を楽しんでるだけなのに本物と比べる必要なくない？
@@guitardaisukiman個人で楽しむだけなら大いに結構、ただこれを不特定多数の人間が見る場で日本刀などと呼ぶのは刀匠の方々に失礼だと自分は思う
脇差の刃の長さは50cm前後だし、何より日本刀の鍛造に最も重要な鍛錬 (鋼を何度も折り返して鍛えること)をしていないので、この作品を脇差と呼ぶべきではない
しかし拵をこうして再現できる外国の方が居るというのは驚くべきことだ
使った鋼材を何十回と折畳んで芯材とし、その芯材を元に小太刀でも作れば多少は日本人でも納得するかもしれない。
折り返し鍛造する理由は、原料となる玉鋼に含まれる炭素量を均一にするためと不純物を取り除くため。
製鉄メーカーが作る現代鋼はもともと炭素量が均一で不純物も含まれないから、折り返し鍛造は不要。らしい。
@@piroyuki8954
書き方が悪かったかも。
脇差しとお題目を掲げ、芯材を軟材で包んで無いのが「？」が浮かんでしまうんですよ。
この動画は作り方が洋ナイフと何ら変わらないのですよね。
分かりづらい書き方して申し訳ないです。
ですね❗️
素材が生の鉄に焼き入れたぐらいじゃ
刀にはならないね。
立派な偽物が出来ましたって感じ❗️w
@@piroyuki8954まぁその通りなんやけど
鑑賞目的なら肌が出ないとイマイチやしな…
@@piroyuki8954殿
ですね👍
Decades of watching sword making and I realized; if you want to carry or hide something, tie it under the cord wrap. 😮
Definitely works!!
This is a small type of Samurai sword. This is used to fight in the small and narrow areas. Other sword is called Katana and it’s a longer and bigger sword. It’s used to fight on the open areas. Each Samurai used to carry two swords back in the day.
Katana were mostly a symbol of status and would find the most use in self-defense. On the battlefield, most samurai would use a tachi, odachi, naginata, bows and later tanegashima-guns.
It looks beautiful because I love katanas
Finally someone with skill. Thanks for sharing.
I appreciate that man🔥🔥
Excellent job
Эй чувак даже с кожей ската для рукояти заморочился, японцы не судите его строго, он сделал классную вещ.
これは修学旅行で買う模造刀の作り方ですね😅
Amazing 🥺
Thank you very much!!
Someone's craftsmanship skill is at a genius level.
外国の方々が作ると大体こんな感じですが…それダケ日本刀が人気なんでしょうね。どのくらい斬れるのか興味がありますよ。
Очень трогательно выглядит ключ от бабушкиного комода, использованный в качестве мэнукэ.
That’s awesome, keep up the good work
Amazing work!
Can you make some renaissance rapier (italian or german) with curved guard?
Imagine forgetting to remove the primers from those casings lol.
形だけは似せられる、人を斬る訳では無いレプリカだから上出来だと思う。
素晴らしいチャレンジだと思う。
ただ、曲がるし折れるんだろうなとは見て取れる。
Меч называется... Мечта самураев ❗⚒️👍
Меч называется Синоби
Salut l'ami, jolie travail, ta vidéo montre que tu es passionné 👍👍👍
Just style looks like a japanse katana.
But how to make is difference entirely.
Katana maker hit the red hot iron over thousands of times.
色々雑いけど趣味でやる分には楽しそう
油焼入れなら土置きを通常と逆にしないとな
エッジの部分には土を置かずに棟側に分厚く置かないとね
これ、日本刀がこう作られてると誤解されるでしょうね💦
この動画の刀の作り方はブロードソードなどの中世ヨーロッパで作られた製法なので、日本刀の技術じゃないのはそうなんだけども。
素直に剣を作る技術は素晴らしいと思いました！
Bullet casing tsuba goes hard 🇺🇸🇺🇸🇺🇸🗣️🗣️🗣️🔥🔥🔥🦅🦅🦅
🫡 💥🎆🎇
"This weapon, will kealllll"
Awesome 🔥
これは日本刀ではありません。
Good so far, but still lack of Yaki-ire process..
It lacks just about everything tbh. It looks like someone who hasn't made 10 knives yet trying something a bit too elaborate for their level, or rushing it to put it in a youtube short.
Thats not a wakizashi. The length..and the method. Its just a decoration piece to look like a wakizashi
刀を舐めてるのか。本来の工程の100分の1くらいじゃないか？
作ったことも無い日本人の、批判が多くてとても恥ずかしいです。ごめんなさい。
とても素晴らしいです！
まぁ日本の脇差を作ると言って日本伝統的な作り方と全然違えば批判したくなる気持ちも分からなくは無い
@user-fu9zi3ww2l
コピー品にケチつけるのもどうかと思うがね…それ言い出すなら模造刀も作り方違うがね…
ワイ的にはS&W製の実銃と東京マルイ製のホビーエアガンくらい別物
*ABSOLUTELY INCREDIBLE!*
Beautiful work!
Thank You for sharing this with us!
If you want your hand splitting in 2 during a stab- do this...
Why the skeleton key?
¿Y para que la llave? ¿es para cortar y para abrir puertas la katana?
人を殺める海外の剣がこう作られてるて事でもある。
薬莢で外人魂をいれたか？
Whats the purpose of the key?
Did a hamon appear?
模造刀を作るのはすごいけど😮日本の刀鍛冶の人に言わせれば刀ではない😮模造刀
Awesome👏🏻
🙌 🔥🔥 Thank you!
beautifull
Damn I love your videos but next time you cover UK trap lore, hook us yanks up with some subtitles. Some of these accents so thick all I can understand is “OI BRUV INNIT U WOT M8”
That’s awesome!
😮😮 цікаво 🧐🤔 молодець 👍
Японские мастера пошли делать сепуку после увиденного😅
Шаришь) 😅
@@mixx-team положение обязывает,сам ножи изготовляю и немножко розбираюсь,мечи японцы делали из молибденовой стали,руда у них с примесями молибдена,а обплетку делать учатся годами ,высшее искуство,здесь только правильно что кожу ската использовали и зональную закалку делали.
As usual I want it😂
Why the key?
What's the key for?
Not folded?
日本由来のものをこうやって自作してまで表現したいって思ってもらえるのはありがたいね。それを本物の日本刀だと認めることはできないけど。製法もデタラメだし😅
偽物
形を真似ただけ
コピー品に偽物もクソも無くて草
Beautiful work!!!
ドラマや映画の小道具にしか見えんわ
Isso e retirada de terras raras pra espadas.? Ps rio de Janeiro Brasil
А где же сердечник у клинка🤷♂️
Espadita bebe🗿
Great master 👍
刀だけど日本刀じゃないね
Schönes Schwert 🧐👌
日本刀は何回も折り畳みを繰り返す事によって頑丈な刃ができるのにこれじゃあ日本刀とは別の物になってるやん
What about Zulfikar sword with Allah words. Can you forged it?
That's awesome wakizashi
👌💥
Kinawachi
😂😂😂😂😂
Вакидзаси?
Too long for Tanto too short for wakizashi
最初の鉛筆怖いんですけど
I always wanted to own a samurai 😊
That's not how you make a wakizashi
❤ wow
形は刀ですが、素人には造れませんよ😅
berbakat
Cool but....there is no such thing as japanese wakizashi 😂 there is just the wakizashi which is japanese by definition
Not folded once
Для чего ключ?
Wrong steel
😮😮😮👍👍👍👍👍👍
Hlo bro , I need katana.
なまくらにも、劣る
👍👍👍🌟🌟🌟🌟🌟👑👑👑💯👍👌😎
It has no katana spine. Its fake
Ты оскорбил всю историю создания этого клинка, ты делал все небрежно, не стараясь сделать хоть чуть чуть лучше, грязная противная работа, никогда не повторяйте того что вы сделали в этом видел, вы позорите себя как мастера, с таким неуважительным отношением
Quero uma
not wakizashi
😎
WTH is this SHT?
Comme quoi même une munitions tirée peu encore ôter la vie par sont recyclage
形だけ似せた鈍
Fea la wuea….
Thank you
かねが入っとらん
Nife please py
あまりにもお粗末
異国の地でここまで日本刀に似せれる技術を素晴らしいと思わないの？
思わない。誤解されるから。
頼むからやめてくれ
No Soul