Nothing wrong with your rig and I used to make mine a lot like yours, but I recently went out night fishing in the surf with a fellow who has caught over 150 sharks this year. (He has lots of pics of 5 to 10 ft. lemons, blacktips, bulls, tigers, hammers, etc. so he's legit.) His leaders were straight 6 to 8 ft. of 800 lb mono crimped to a 20/0 non-offset circle hook and a 300# swivel. He said he hasn't lost one shark to a bitten-through leader ever on this rig. I was impressed with the simplicity. I used one of his leaders on my surf rod/reel and brought in and then released a feisty 6 ft lemon shark later that evening. With the drag fully engaged (40 lb plus) on a Slammer III 9500 that lemon took over 300 yards of 80 lb line from me before I was able to stop it and then inched it in, and there was no serious abrasion on this leader.
I'll be staying on Navarre beach this coming week! I am an avid Texas coast sharker and looking forward to trying my luck on your home turf. Question.... where do you buy your components? Crimps, swivels and hand swager to be specific! I'll keep an eye out for you on the sand this week!
Great vid thanks for sharing how you make shark leaders! In your vid at the end shows you all camped out on a beach that is great looking beach. What beach is that? I will probably never make it that far east but maybe some day. Tight lines and keep the vids coming!
Good looking rig. Why do you like copper crimps over the wire instead of aluminum? Also try some shrink wrap vacuum tubing to cover the crimps. Shit looks dead sexy when your done.
Could you make a video on a rig for casting for sharks on a big spinning setup? I'd love to learn about spinning rods, reels and shark leader rigs. Also what crimper do you use?
Thanks for sharing! I’ve been fishing predominantly Midwest freshwater most of my life. Hoping to put my son on a nice shark as we celebrate him graduating high school and going on to his next chapter. This gives me a good idea on how to get him rigged up for the beast in our future! Thank you! Also, are you now or have you ever been a Best Buy employee? That razor nice looks familiar, ha!
Nice video, I kinda do the same when making my casting leaders. I don't have the money for a conventional set up yet. But I do have about 200 for a nice surf rod was leaning towards the carnage II. Any suggestions? Casting big baits and doing short drops on the yak on slammer 3's. So like 6+ bait and heavier weights if the surf is rough. Enjoy the vids. Can't wait to get into the conventional game next year after tax season lol.
What did you go with ? I'm having the same issue.espevially since I'm in Illinois and it's hard for me to go to a store and personally see and feel the gear/rods
Great video! Question for you: what size of shark are you targeting for this rig versus the rig in your surf casting shark rig? Just getting into shark fishing off the texas coast.
You say always use copper crimps for steel wire but you don't give any explanation why? In my experience there's no difference between the hold of aluminum or copper there's only a slight difference in corrosion
Corrosion will make the leader fail makes the crimp weaker. When fight a big shark form land that would prolly be the first thing to fail under high tension
Oh yeah I cried when I lost the salmon of a life time from the hook straightening out after it ran my whole spool of line around a old concrete bridge pillar was worried bout it breaking off and it straighted the hook right at shore
Yeap still to this day that's the one fish that made me cry 😢 lol but it wasn't like a tantrum or anything tho hahahahahahaha I was just so upset at myself bc I was so careful turning down my drag Lil by Lil tryn to keep the line from breakin and turns out needed to worry bput the hook
Constructive criticism: 1) show the crimp picture for more than 2 seconds literally! Pausing it puts text over the part you want to see, so that doesn't work either. 2) If you drop the camera more than twice, consider doing another take. 3) too fast through the stuff I want to study and too slow through the fluff.
Nothing wrong with your rig and I used to make mine a lot like yours, but I recently went out night fishing in the surf with a fellow who has caught over 150 sharks this year. (He has lots of pics of 5 to 10 ft. lemons, blacktips, bulls, tigers, hammers, etc. so he's legit.) His leaders were straight 6 to 8 ft. of 800 lb mono crimped to a 20/0 non-offset circle hook and a 300# swivel. He said he hasn't lost one shark to a bitten-through leader ever on this rig. I was impressed with the simplicity. I used one of his leaders on my surf rod/reel and brought in and then released a feisty 6 ft lemon shark later that evening. With the drag fully engaged (40 lb plus) on a Slammer III 9500 that lemon took over 300 yards of 80 lb line from me before I was able to stop it and then inched it in, and there was no serious abrasion on this leader.
9’ Lemons can’t pull more then 28lbs drag your just waffling kiddo
Great video! Always look forward to your videos. Keep em coming! 💪🏼🦈🎣🏝🤙🏼
Jonathan Coley thanks buddy I appreciate it 🤙🏽
I also want to add that the Flemish loops you add to your rigs is a good idea.
I love those offshore loops
Thanks for the help I’m new to this shark fishing stuff !
Love it man! Them sandbar 24/0s!!
Gulf Coast Nation all day
Thanks Jack, good stuff. I’m gonna try a few of those things on my next batch of leaders. Always lookin for new ways to do things!
Awesome let me know how they work
This is passion. 🎣
Thanks big dog!! 🔥🔥 that looks goooooood.
I'll be staying on Navarre beach this coming week! I am an avid Texas coast sharker and looking forward to trying my luck on your home turf. Question.... where do you buy your components? Crimps, swivels and hand swager to be specific! I'll keep an eye out for you on the sand this week!
Terra Firm tackle
Great vid thanks for sharing how you make shark leaders! In your vid at the end shows you all camped out on a beach that is great looking beach. What beach is that? I will probably never make it that far east but maybe some day. Tight lines and keep the vids coming!
That was Pensacola beach. Thanks for watching
Very nice, and excellent video. Thanks
Thanks 🤙🏽
Good looking rig. Why do you like copper crimps over the wire instead of aluminum? Also try some shrink wrap vacuum tubing to cover the crimps. Shit looks dead sexy when your done.
jake brown aluminum and cable tends to slip under heavy pressure. Yes heat shrink will clean it up nice
Could you make a video on a rig for casting for sharks on a big spinning setup? I'd love to learn about spinning rods, reels and shark leader rigs. Also what crimper do you use?
I have two crimps they are bass pro brand , also I have video up on my channel already for casting rigs for sharks
Thanks for sharing! I’ve been fishing predominantly Midwest freshwater most of my life. Hoping to put my son on a nice shark as we celebrate him graduating high school and going on to his next chapter. This gives me a good idea on how to get him rigged up for the beast in our future! Thank you! Also, are you now or have you ever been a Best Buy employee? That razor nice looks familiar, ha!
Thanks I’m glad I could help. And no I’ve that thing for a while lol. Good luck on catching some sharks stay safe 🤙🏽
Nice video, I kinda do the same when making my casting leaders. I don't have the money for a conventional set up yet. But I do have about 200 for a nice surf rod was leaning towards the carnage II. Any suggestions? Casting big baits and doing short drops on the yak on slammer 3's. So like 6+ bait and heavier weights if the surf is rough. Enjoy the vids. Can't wait to get into the conventional game next year after tax season lol.
Just get a a heavy enough rod to handle the line you are using and weight. Is my best suggestion. Thanks for watching buddy
What did you go with ? I'm having the same issue.espevially since I'm in Illinois and it's hard for me to go to a store and personally see and feel the gear/rods
Nice video bro, stay safe ✌
m.fazly thank you 🙏🏽
what strand cable is that? cause an 49strand the day will come when you get chewed of, on heavy enough 1x7 the only danger is to get a knot in it.
Thx for the tip.
Hiett Adams no problem thanks for watching 🤙🏽
Where do you get the monofilament leader from please.
shark fishing world wide
Wonderful video. We enjoyed watching.God bless #fishingbdGo
Fishing BD Go thanks and tight lines
Great video! Question for you: what size of shark are you targeting for this rig versus the rig in your surf casting shark rig? Just getting into shark fishing off the texas coast.
7 ft and bigger. The biggest we landed in this rig is a 13ft hammer
What knot do you use to tie your main line on to the swivel on the leader?
Great vid. I’m surprised you didn’t use a SS thimble.
I have before just don’t see the need they look good though
can you do one with a full rod/reel and line choices? etc
I’ll be more than happy too
Any redfish or drum leader videos?
No but I’ll be more than happy to make one
Hey, is Oct. a good month for catching mahi-mahi?
mustangmaxford1965 yes it is October is a great month
What size sinkers do you run on those? I would imagine they would have to be pretty heavy
I usually use 16oz terrafirm spider weight
How do you do the weights?
I attach them to my leaders using a zip ties
Where do you attach the weight?
I zip ties them to my leader or on a snap swivel
Where did you get your coated wire?
Shark fishing world wide
How do you anchor your bait with this leader ?
A weighted spider weight
what brand is the wire or where can I get it?
Got mine from shark fishing world wide
Where did you get your crimper?
Sams tackle in orange beach Alabama
looks like you didn't have the right size crimper for the mono crimps.
Where can I get the 1000 pound mono ?
Shark fishing world wide sometimes has it in stock. It’s been hard to find by lately
You say always use copper crimps for steel wire but you don't give any explanation why? In my experience there's no difference between the hold of aluminum or copper there's only a slight difference in corrosion
Corrosion will make the leader fail makes the crimp weaker. When fight a big shark form land that would prolly be the first thing to fail under high tension
Oh yeah I cried when I lost the salmon of a life time from the hook straightening out after it ran my whole spool of line around a old concrete bridge pillar was worried bout it breaking off and it straighted the hook right at shore
Dang that’s heart breaking
Yeap still to this day that's the one fish that made me cry 😢 lol but it wasn't like a tantrum or anything tho hahahahahahaha I was just so upset at myself bc I was so careful turning down my drag Lil by Lil tryn to keep the line from breakin and turns out needed to worry bput the hook
What is ur hurry
I’m just fast 💨
Constructive criticism:
1) show the crimp picture for more than 2 seconds literally! Pausing it puts text over the part you want to see, so that doesn't work either.
2) If you drop the camera more than twice, consider doing another take.
3) too fast through the stuff I want to study and too slow through the fluff.
Thanks I always appreciate good feedback back 🤙🏽
Knock on plastic...
Buy hammer lug 😂